Categories

Best Contractor Table Saws

Aoasur Replaces DWE7402DI Dado Throat Plate - Compatible with DWE7490X, DWE7491RS, DWE7499GD and DWE7491X table saw versions for construction sites - Made from Impact-Resistant PC/PBT Blend Material

  • Complete replacement of DWE7402DI Dado Throat Plate -Allows the use of stacked wallboard cutters. Like the stock plate, this dado throat plate also comes with 4 adjustment screws. This exact replacement Job site table saw dado throat plate will fit and lock in place like the stock plate..
  • Dado Throat Board can be used with DWE7490, DWE7491, and other 10” Job site table saws and can be perfectly compatible like the original board - Fits perfectly on DWE7490, DWE7491, and DWE7491RS (Type 2) table saw models ..
  • Made from impact resistant PC/PBT blend material : This is no flimsy plastic. PC/PBT construction-grade material blends have high impact resistance, dimensional stability, heat resistance, and chemical resistance. Unlike other plastic blends, PC/PBT is rigid, tough, and strong..
  • Size: Length13 1/2" x Width3 11/16" xThickness7/16"，this throat plate is a universal fit for several 10-inch portable job site/contractor table saws that have dado capabilities. It can support up to an 8-inch diameter stacked dado that is up to 13/16 inches wide..
  • Contact us: If you have any questions, please click "Contact Seller" in the "Inquiry" or "Your Order" option on our storefront..
Check Stock

Craftsman 10 Contractor Table Saw Metal Handwheel Handle Crank 1/2 Tilt or Elevation Shaft

  • 4 1/2" diameter handwheel, fits 1/2" shaft. Used on the blade elevation and tilt shafts..
  • Fits Craftsman 113.xxxxxx model series belt drive contractor saws with 1/2" diameter shafts..
  • Replaces Sears Part Numbers: 818526, 62689, 820452, & 806872.
  • Will not fit older model 113.xxxxxxx saws that have 3/8" diameter shafts..
Check Stock

Fulton 110V Single Phase On/Off Switch with Large Stop Sign Paddle for Easy Visibility and Contact for Quick Power Downs Ideal for Router Tables Table Saws and Other Small Machinery

  • We have all been in a situation where we need to quickly turn the power off on our router table or contractor table saw and both of our hands are a bit pre-occupied. Reaching down and underneath your router table or contractor table saw to try and locate the power switch can be very cumbersome as well as very dangerous while your feeding stock through.Many router table setups don’t even have an external power switch separate from the router itself..
  • With this uniquely designed and easy to locate Paddle Button Stop Power Tool Switch you can simply bump the large stop sign paddle with your knee or hip to shut the power off. That means both of your hands can stay engaged on the project while you bump the power off with your hip or knee. A large green START button is always visible on the top side of the paddle. Simply push the START button to power on..
  • Install the switch near or at hip level or in a position that you will be able to bump it when needed. The switch comes with installation hardware and can be mounted to most any type of material. The unit has two cords. The heavy duty female cord is 18” long and designed to accept the power source plug from your power tool. The heavy duty male cord is approximately 66 inches long and is used to pl....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw Right Side Dubby Sled

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles....
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the....
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate....
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp....
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the....
Check Stock

CRAFTSMAN Contractor Retractable Extension Cord Reel 100 Ft. With 4 Outlets & Heavy Duty 12AWG SJTW Cable

  • Contractor Grade’s choice with the portable cable reel extension lead with four socket outlets and a comfortable ridged handle. Heavy duty metal steel drum provides additional security for the most heavy-duty tasks. This heavy-duty open reel with its large steel metal drum has been designed and engineered for longevity..
  • Convenient 4 Outlet Extension Cord: Always have outlets where you need them with this outside retractable power cord reel! This roll-up extension cord includes 4 grounded outlets and a durable 12AWG cord which comes in a high visibility color, ensuring safe practice in whatever environment the reel extension cord is used..
  • Tangle-Free Cord Management: This retractable cord reel features a sturdy, easy-grip handle so that you can easily wind your extension cords and keep everything organized. It also includes an auto-locking system to keep the end of the cord in place..
  • Built-In Circuit Breaker: Designed to protect your devices and equipment, this retractable extension cord reel includes a built-in circuit breaker with overload protection. It will automatically go off if the rated current or voltage is exceeded..
  • Heavy-Duty Outdoor Power: With a study, heavy duty construction and easy to carry design, this electric contractor grade....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby Sled)

  • ...an extremely safe way to cut small pieces, and will easily pivot out of the way when you don’t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands and fingers out of harms way..
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the following specs for a proper fit. The Miter Slot should be a ¾” wide x 3/8” deep slot. Your saw must measure at least 27” from the front of the saw to the back. The miter slot must be 4” to 5 ¾” from the installed table saw blade. PLEASE NOTE: that the Dubby WILL NOT work on most JOBSITE style table saws. Please measure your saw before ordering..
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby and Right Side Dubby Sleds are Included)

  • ...an extremely safe way to cut small pieces, and will easily pivot out of the way when you don’t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands and fingers out of harms way..
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the following specs for a proper fit. The Miter Slot should be a ¾” wide x 3/8” deep slot. Your saw must measure at least 27” from the front of the saw to the back. The miter slot must be 4” to 5 ¾” from the installed table saw blade. PLEASE NOTE: that the Dubby WILL NOT work on most JOBSITE style table saws. Please measure your saw before ordering..
Check Stock

Vise le chanteur (Live à L'Olympia / 1980)

  • HITCH VISE: Ideal for home, shop & contractor use, this vise features a 6-inch jaw width and 1.1-ton clamping force. The spring-loaded handle hub allows the handle to be fixed in any position..
  • HEAVY DUTY: Built to withstand wear and tear and rust, this hitch vise features steel and ductile iron construction with a powder coat finish. Weighs 38.8 pounds..
  • MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials..
  • THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches..
  • SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair..
Check Stock

Olympia Tools Mechanic's Bench Vise 38-615, 5 Inches, multicolor

  • BENCH VISE: This mechanic's bench vise is ideal for home, shop & contractor use. It mounts on the workbench securely with countersunk holes. Hold wood pieces together & assemble them with efficiency..
  • HIGH QUALITY: Vise features a heavy reinforced 4-lug base, polished anvil & anvil horn for shaping, hardened steel replaceable jaw faces, permanent pipe jaws and chrome-plated spindle & handle. 30,000 PSI..
  • MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials..
  • THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches..
  • SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair..
Check Stock

Link2Home Contractor Grade Retractable Extension Cord Reel 75 Ft. With 4 Outlets & Heavy Duty/High Visibility 3-Prong SJTW Cord

  • CONTRACTOR GRADE HEAVY DUTY POWER: (4) Grounded outlets and durable 75 ft. 12AWG cable help connect power equipment such as drills, table saws, power washers, grinders found throughout the construction side, warehouse..
  • HEAVY DUTY METAL STEEL DRUM: Provides additional security and durability with a 12 AWG SJTW cable..
  • BUILT IN CIRCUIT BREAKER: Circuit breaker with overload protection will automatically go off when the rated current or voltage is exceeded to protect devices from damage.
  • TANGLE FREE CORD MANAGEMENT AND EASY TO CARRY: Extension cord easily winds into reel with heavy duty easy double grip handles keeping cords neat and tidy for next.
  • POWER REEL: CSA certified. 75 ft. cord reel. 12AWG SJTW cable. (4) 120V outlets. ON/OFF switch with power light indictor. 3-year warranty. Cord locking system. Heavy duty high visibility outdoor extension cord..
Check Stock

Makita B-10849-5 14

  • Premium design for faster cutting and longer life.
Check Stock

ROK 6-1/2 inch Circular Saw Blade Set, Pack of 3

  • Bundle Includes 3 saw blades, Finishing Blade 40Teeth, Framing 18T, General Purpose Blade 24T.
  • Contractor quality Thin Kerf Teeth with carbide tips.
  • 5/8" Arbor, Fits most cordless circular saws.
  • Expansion slots to prevent blade warping.
Check Stock

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill..
  • CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools..
  • LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge..
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts..
Check Stock