Categories

Best Coolant Drain Plug

ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
  • Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
  • FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
  • While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
  • Constructed from opaque yellow hard-plastic components.
  • 3 out of 5 cap adaptors include steel rings to hold the ada....
Check Stock

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock

ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch

  • SAVE COOLANT & SAVE TIME: The ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch is a lifesaver when performing fuel line or coolant maintenance.
  • Easily pinch off cooling hoses instead of losing coolant and it spilling all over engine on certain jobs such as valve cover gasket replacements.
  • No need to drain systems before servicing.
  • Ratcheting jaws allow for automatic locking to save you even more time.
  • EASY TO USE: Simply use the ratcheting mechanism on the pliers to close the jaws and squeeze shut your desired hose.
  • Plier jaws swivel to ensure a complete shut off.
  • 3-IN-1 SET: Package includes (3) pinch off pliers – a small 8-inch (20.3cm) long tool with a 1.5-inch (3.8cm) contact area, 10-inch (25.4cm) long tool with a 1.75-inch (4.4cm) contact area, and 12-inch (30.5cm) long tool with a 2-inch (5.1cm) contact area.
  • VARIOUS APPLICATIONS: Small 8-inch plier works great for pinching off small engine fuel hoses or fragile 1/4-inch (6.4mm) plastic water lines under your kitchen sink.
  • Medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank.
  • This entire set can safely be used on washing machine drain hoses, automotive hose lines, radiator lines, fuel l....
Check Stock

ABN AC Radiator Funnel Fill Kit - Spill Proof Coolant Flush Set Radiator Bleeding for Refilling Coolant No Spill Bleeder

  • [System Bleeding Made Easy]: The ABN Coolant Funnel Kit for Bleeding Coolant Systems ensures that releasing air pockets from the system and refilling it with coolant is efficient and stress-free.
  • Kit compatible with most domestic and imported vehicle models.
  • [No More Leaks]: Spill free funnel allows you to replace and bleed the coolant system without stressing about spilling the coolant liquid on your engine or garage floor.
  • Smooth plastic construction and funnel stopper prevent liquids from making a mess in your workspace.
  • [Easy to Use]: Use one of the provided adapters and attach to the mouth of the system.
  • Push down on adapter, release pressure, twist until it clicks.
  • Pour in coolant fluid until level stops dropping.
  • Watch until air bubbles no longer come to surface.
  • [Safety First]: Ensure that the system is shut off (completely cooled down) and coolant hoses are free of pressure before performing maintenance.
  • Coolant liquid in the vehicle’s system will get scalding hot while engine is in operation.
  • The pressure in the system will make the coolant spray out if not cooled.
  • [Fit for Your Tool Kit]: Coolant flush kit includes (1) transparent funnel wit....
Check Stock

Mishimoto MMRAD-RAM-13 Performance Aluminum Radiator Compatible With Dodge Ram Cummins 6.7L 2013-2018

  • Direct fit for the 2013-2018 Dodge Ram 6.7L Cummins.
  • Increases coolant capacity by 63% and surface area by 41% to maximize cooling.
  • Durable fully aluminum construction with TIG-welded end tanks and fittings.
  • Features a 2" thick, three-row core for efficient cooling under high loads.
  • Includes Magnetic Drain Plug to capture any metallic debris/fragments in your cooling system.
Check Stock

Kauplus Radiator Coolant Filling Funnel Kit- Spill Proof Coolant Filling Plastic Funnel Kit with Adapter

  • Best Choice for Filling Automotive Cooling Systems. Fit on Most Domestic and Import Cars and Light Trucks, i.e. G.M, Nissan vehicles….
  • Smart Coolant Filling Funnel for drain refill of the coolant prevent Spills & Trapped Air as coolant filling application, the spill-free funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance.
  • No-Spill Filling Funnel Kit with 5 Caps (adapters) fits on most domestic and import carts, 2 pcs of 45 degree elbow allows use on radiator caps that are placed at an angle and 1 straight extension (5 inch) allow access to caps under shrouds.
  • The Spill Proof Coolant Filling Funnel Incorporates a Fluid Stopper with tube for trapped air.
  • Tight attach the plastic tube on fluid stopper end to bleeding trapped air pockets out while filling the coolant to prevent unsteady pressure with cooling system. These air pockets accumulate over time can cause overheating by impeding the flow of coolant through the system.
Check Stock

Nissan Genuine Fluid 999MP-L25500P Blue Long Life Antifreeze/Coolant - 2 Gallons

  • Blue long life antifreeze/coolant (LLC) is a 50/50 mixture and has the same distinctive blue, high quality, factory fill found in Nissan vehicles..
  • Add directly to anti-freeze in radiator, in amounts indicated on label.
  • 2 Gallons 50/50 premix - no need to add water.
  • A coolant drain and fill should be performed every 50,000 miles.
  • This coolant contains a bittering agent.*.
Check Stock

Nissan Genuine Fluid 999MP-L25500P Blue Long Life Antifreeze/Coolant - 3 Gallons

  • Blue long life antifreeze/coolant (LLC) is a 50/50 mixture and has the same distinctive blue, high quality, factory fill found in Nissan vehicles..
  • Add directly to anti-freeze in radiator, in amounts indicated on label.
  • 3 Gallons 50/50 premix - no need to add water.
  • A coolant drain and fill should be performed every 50,000 miles.
  • This coolant contains a bittering agent.*.
Check Stock

QWORK Fan Clutch Wrench Set, 32mm Fan Clutch Nut Wrench, Water Pump Holder Removal Hub Holding Tool

  • 【Powerful Coolant Vacuum Refill Kit】 Perform vacuum pressure test and coolant vacuum filling service. Use an extra vacuum pump to work with this airlift coolant replenishment tool to create a vacuum in the cooling system, and then suck the coolant into the radiator. Quick replenishment system, no air pockets or hot spots are generated, to avoid distortion or other factors damaging the engine..
  • 【Convenient & Widely Applicable Coolant Vacuum Cleaning Kit】By generating a vacuum in the cooling system, the time for refilling new coolant is greatly shortened, and there is no need for time-consuming air bleeding. This coolant vacuum cleaning kit is widely used Used in various domestic and foreign automobiles, SUVs, trucks, etc..
  • 【Excellent durability & air tightness】 This coolant refill kit adopts a reliable metal structure to ensure durability and good air tightness, a reliable & durable tool set..
  • 【Complete Coolant kit】The cooler anti-leak kit includes a brass T-connector and universal taper plug, 4 adapters of different sizes (O.D. 35mm, 40mm, 45mm, 55mm), suitable for most types of vehicles. The adapter can be connected to the adapter on the air supply tool, and then the radiator cover sealing cooling system can be replaced to help radiator....
Check Stock

showingo 2 Pack Cooler Drain Plugs for YETI Cooler Accessories, Large & Small Drain Plug Cooler Plug Also Compatible with RTIC Coolers

  • Compatibility - Cooler Drain Plug Fit for Yeti Coolers and Also Compatible with RTIC coolers.
  • Cooler Drain Plug Kit Includes 1 Large Screw-On Gasket Replacement Coolers and 1 Replacement Small Cooler Drain Plug with Leak-Proof Design for 20QT, 45QT, 60QT Coolers.
  • Cooler drain plugs with leak-proof design replace your old or broken cooler drain plug perfectly. If the threads on the drain plug get worn out and it’s no longer as airtight as it used to be, perfect cooler replacement parts for RTIC Coolers.
  • Replacement drain plugs are easy to open and close to drain your cooler water, durable and good for easy draining. The screw-in gasket drain plug is easy to use and keeps your cooler leak proof and rugged. When partially open, the drain plug allows you to drain cooler without completely removing the plug..
  • Easy to Use.These replacement drain plugs can drain the cooler water while drain plug is partially open. Simply unscrew the drain plug, pull it out, tilt your cooler, and let the water out. Tighten the cooler drain plug is good for keeping your coolers cold..
Check Stock

2 Pack Drain Plugs for RTIC Coolers, Large & Small Cooler Drain Plugs Compatible with RTIC 20QT, 45QT, 65QT Coolers with New Two Drains

  • Compatible with -- RTIC replacement plugs used in the "Dual Drain Plug System". The large & small cooler drain plugs fit for RTIC 20QT, 45QT, 65QT new coolers with 2 drainage holes..
  • Good Design -- The screw-in gasket drain plug improved finger knob design which are easy to open and close to drain your cooler water. When partially open, the drain plug allows you to drain cooler without completely removing the plug..
  • Easy to Use -- These replacement drain plugs can drain the cooler water while drain plug is partially open. Simply unscrew the drain plug, pull it out, tilt your cooler, and let the water out. Tighten the cooler drain plug is good for keeping your coolers cold..
  • Package Included -- The cooler drain plug kit include 1pc large screw-in gasket cooler drain plug replacement for RTIC coolers and 1pc small cooler drain plug with leak-proof design replacement for RTIC 20QT, 45QT, 65QT Coolers..
  • Satisfaction Guarantee -- We care for all customer's feeling. If this product does not meet your expectations, please send it back for a 100% refund or contact us directly....
Check Stock

YETI and RTIC Compatible Large & Small Drain Plug Combo Pack - Compatible Replacement Plugs for RTIC's and Yeti's New 2 Drain Coolers - Yeti Cooler Accessories

  • Compatibility: The RTIC Compatible Large & Small Drain Plug Combo Pack Is An Improved Design That Fits Specifically With the RTICs New 2 Drain Coolers..
  • Package Contains: Yeti bucket accessories has the package which includes Both RTIC Replacement Plugs Used in the “Dual Drain Plug System” – One Small Plug and One Large Plug..
  • Perfect Size: Yeti cooler plug and RTIC cooler plug has an Oversized Drain Plug on One Side of the Cooler to Allow Faster and Easier Draining. Yeti stopper helps to stop the water and easy to drain..
  • Good Replacement: The Yeti Accessories Beast Cooler Dual yeti cooler drain plug Kit Contains Both the Large and Small Drain Plugs Specifically Made to Be Compatible With the RTIC Coolers With Dual Drain Valve System..
  • Easy to Use: Yeti Drain hose or yeti drain plug has a Standard Sized Drain Plug on the Other Side With an Integrated Vacuum Relief Valve for Easier Opening of the Cooler Lid When the Plug Is Pressed..
Check Stock

SCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford

  • FUNCTION: This coolant vacuum refill kit performs vacuum pressure test and coolant vacuum fill services. Use an extra vacuum pump to work with this airlift coolant refill tool to form a vacuum in the cooling system, then draws coolant into the radiator. Quickly refill the system with no air pockets or hotspots produced, avoid warping or other damage in engine. This cooling system vacuum purge & refill kit is widely suitable for various domestic and foreign cars, SUVs, vans and trucks.
  • MATERIAL & USAGE: cooling system coolant refill tool has taken reliable metal construction to ensure durability and good air sealing. Equip with splendid aluminum & brass manifold body with rubber-covered pressure gauge (Range:-30~0 inHg/-76~0 cmHg). Brass T-connector can connect with vacuum pump for vacuumizing, and two standard air plugs (American & European style) are provided. 60" long coolant filling hose with quick plug can be inserted into the manifold body for refilling coolant.
  • Antifreeze filler kit includes a O.D. 32mm rubber adapter and 3 sizes adapter sleeves, with O.D. 45mm 40mm and 35 mm, fit for most types of vehicles. The adapter sleeves can be attached on the adapter on refill tool, and then replace the radiator cap to seal the cooling system, to help rad....
Check Stock