Best Coolant Through Milling Cutter Holder

Chuck Holder, Milling Tool Holder Not Rusty for Processing Steel and Cast Iron

  • Furthermore, this milling arbor adapter is suitable for processing steel and cast iron, soft stainless steel and aluminum..
  • Easy to use and not rusty, such chuck holder is easy to use in the practical life..
  • With good chemical stability, heat resistance and abrasion resistance, the holder is in high hardness..
  • After many inspections before leaving the factory, the quality is guaranteed, you can use it with confidence..
  • Made of high-quality hard alloy cutter head, the milling tool holder is with exquisite workmanship and durable..
Check Stock

BAP400R-50-22-4T Milling Cutter NT40-FMB22 Collet Chuck Holder Indexable End Mill APMT1604 Carbide Inserts for Milling Machines (#1)

  • Adopted New Coating Technology: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time.
  • BAP400R Right-angle Milling Cutter: BAP400R right-angle milling cutter reduces blade wear and saves processing costs.
  • Fast Milling: Fast milling, screw off-position fastening designed, make the Milling Inserts and cutter fit tightly.
  • High Working Performance: This is a high precision Milling Cutter , strong rigidity, good processing effect.
  • High Hardness: The milling cutter is made of high quality material, high hardness with good impact resistance.
Check Stock

SHZOND Collet Set CNC CAT40 Tooling Package ER32 ER16 Collet Set Mill Holder Spanner Drill Chuck (collet set)

  • The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32.
  • All collet chuck are high speed proved,high speed true balance in 15-20K RPM.
  • Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in.
  • Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets.
  • Ideal for milling machine, drilling machine or holder, etc.
Check Stock

SHZOND Collet Set CNC CAT40 Tooling Package ER32 ER16 Collet Set Mill Holder Spanner Drill Chuck (collet set)

  • The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32.
  • All collet chuck are high speed proved,high speed true balance in 15-20K RPM.
  • Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in.
  • Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets.
  • Ideal for milling machine, drilling machine or holder, etc.
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Milling Cutter, Milling Tool, ZDZCYS22DL 10Pcs 3.175mm Handle Milling Tool Cemented Carbide 2-Flute Straight Milling Cutter

  • 【Durable】10pcs cemented carbide milling cutter with high hardness, durable in use.
  • 【Material】The milling cutter is made of high-quality cemented carbide materials with long service life.
  • 【Features】The milling cutter has the characteristics of light weight, small size, easy to use and easy to carry.
  • 【Application】2-blade milling cutter is suitable for processing wood, MDF, acrylic, PVC, EVA, foam, plywood, etc.
  • 【Characteristic】Milling tool has a smooth surface, no burrs, sharp edges, milling, holes, and cutting edges.
Check Stock

Blossoms & Steel (Seaside Pointe Book 1)

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

Milling Tool Holder, Chuck Holder C20-FMB22 Not Rusty Hard Alloy for Processing Steel and Cast Iron

  • After many inspections before leaving the factory, the quality is guaranteed, you can use it with confidence..
  • With good chemical stability, heat resistance and abrasion resistance, the holder is in high hardness..
  • Easy to use and not rusty, such chuck holder is easy to use in the practical life..
  • Furthermore, this milling arbor adapter is suitable for processing steel and cast iron, soft stainless steel and aluminum..
  • Made of high-quality hard alloy cutter head, the milling tool holder is with exquisite workmanship and durable..
Check Stock

Milling Tool Holder, Not Rusty Chuck Holder CNC Milling Holder Straight Shank End for Processing Steel and Cast Iron

  • Furthermore, this milling arbor adapter is suitable for processing steel and cast iron, soft stainless steel and aluminum..
  • Made of high-quality hard alloy cutter head, the milling tool holder is with exquisite workmanship and durable..
  • Easy to use and not rusty, such chuck holder is easy to use in the practical life..
  • With good chemical stability, heat resistance and abrasion resistance, the holder is in high hardness..
  • After many inspections before leaving the factory, the quality is guaranteed, you can use it with confidence..
Check Stock

Chuck Holder, Hard Alloy Straight Shank End CNC Milling Holder Milling Tool Holder for Processing Steel and Cast Iron

  • With good chemical stability, heat resistance and abrasion resistance, the holder is in high hardness..
  • Furthermore, this milling arbor adapter is suitable for processing steel and cast iron, soft stainless steel and aluminum..
  • After many inspections before leaving the factory, the quality is guaranteed, you can use it with confidence..
  • Made of high-quality hard alloy cutter head, the milling tool holder is with exquisite workmanship and durable..
  • Easy to use and not rusty, such chuck holder is easy to use in the practical life..
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

Milling Cutter, Dovetail Groove Carbide Cemented Straight Shank 6 Flute Dovetail Cutter End Mill Slot Milling Cutter

  • High quality: The milling cutter is made of cemented carbide with high hardness and good wear resistance..
  • Unique design: The effective cutting edge of the milling cutter is 6, and the compact and practical design makes its work more stable..
  • No burr: The main body of the milling cutter is integrally formed, the surface is smooth and burr-free, and the manufacturing size is accurate..
  • Easy to use: the installation of the milling cutter is very convenient and easy..
Check Stock