Categories

Best Copper Air Conditioning Tubing

VEVOR Copper Pipe Bender, 7 Colorful Dies 1/4-7/8 inch 90 Degrees Forward and Reverse Bending, 6-22 mm for Copper & Aluminum Tubes with Reverse Bend Attachment

  • ...e, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, and hydraulic systems..
Check Stock

TOLESA Pipe Cutter Tool 3/16-2 Inch 5-50mm Heavy Duty Metal Pipe Cutter With Deburring Tool Pipe Reamer Sharp Copper Tube Cutter Speed Cutting Tubing Cutter For Stainless Steel Aluminum Brass Pipe

  • ...cutting. Just rotate the tubing cutter, cut the pipe flawlessly..
  • 【Wide Applications】 - The heavy duty pipe cutter for steel is suitable for cutting hard materials such as copper pipe, aluminum pipe and thin stainless steel pipe, the cutting range is from 3/16 to 2 inch （5-50mm）, suitable for electrical, air conditioning installation, automotive and other plumbing installation and maintenance, plumbing tools.
Check Stock

uxcell Refrigeration Tubing, 1/8\ OD x 5/64\ ID x 16 Ft Soft Coil Copper Tubing

  • 【1/8" OD X 5/64" ID X 16 FT】Refrigeration tube outer dia is 3mm, inner dia is 2mm, total length is 16Ft/5m long.
  • 【HIGH REFRIGERATION EFFICIENCY】Good heat dissipation and refrigeration capability,high strength at low temperature.Copper tubes are hollow,so has strong heat transfer capability.If you need refrigeration for refrigerators, freezers, air conditioners, this is a good choice.
  • 【 COPPER MATERIAL】Copper refrigerator tube has the features of high temperature resistance, corrosion resistance, oxidation resistance, durability, long service life.
  • 【SOFT & SHAPE CHANGEABLE】Because refrigeration copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle.
  • 【WIDELY APPLICATION】Refrigerator Tubing is not only used for refrigerator, freezer and air conditioner as refrigeration tubing coil, but also used as a HVAC system pipe..
Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock

8 Pcs Swaging Tool Drill Bit Set HVAC Repairing Set Air Conditioner Manual Copper Pipe Swage Tube Tool with Copper Pipe Cutter and Deburring Tool for Copper Aluminum and Thin Stainless Steel Tube

  • 【What You Will Get】: This air conditioning copper pipe flaring tool set contains 8 tools: 6 Pcs different size drill bits, 1 Pc mini copper pipe cutter, 1 Pc deburring tool, complete set of tools, very suitable for air conditioning copper pipe flaring operation during HVAC installation, no complicated learning, easy to use..
  • 【Drill size】: 6 different sizes of drill bits, including 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Handle diameter: 7 mm (hexagonal handle), pipe reaming tool is a necessary accessory for repairing air conditioners..
  • 【Mini copper pipe cutter】: 3-28mm (1/8" - 1 1/8") copper pipe cutter can cut copper pipe, steel pipe, stainless steel pipe, aluminum pipe PVC and iron. Note: Cutting PVC pipe is not recommended because it is much more difficult to cut..
  • 【Deburring Tool】: The blade is mounted on the handle can rotate 360 degrees, this tool helps to clean the top of the pipe or tube, it has a compact size and can easily be carried anywhere..
  • 【Why Do You Need HVAC Tools Drill Bit Set】: When connecting copper pipes of air conditioners, the soft copper pipes are expanded by the rotation of the drill bit, so that the two copper pipes are connected without leakage. When used in combination with electric drill and impact....
Check Stock

Amprobe TH-3 Relative Humidity Temperature Meter 2 Display

  • Air/Acetylene Soft Flame Kit has always been the Old Reliable flame tool for plumbers.
  • Produces a precise 2700 Degrees Fahrenheit target heat for soldering and brazing copper tubing.
  • Capable of soldering up to 1/2 inch and brazing up to 3/8 inch copper tubing with supplied tip.
  • Torch Handle with rear control valve for accurate gas control and positive shutoff.
  • Acetylene Regulator for MC Tank with protective rubber gauge boot.
Check Stock

B BOSI TOOLS Tubing Cutter, 3/16 to 1-3/8 inch Outer Diameter Heavy Duty Pipe Cutter of Aluminum, Copper, PVC, Thin Stainless Steel Tube

  • 【Large Cutting Capacity】This tubing cutter quickly and easily cuts 3/16" to 1-3/8" copper, brass, aluminum and plastic tubing, precision designed and constructed with thrust bearing feed for smooth cutting action. Each tool is tested to ensure accurate spiral free cutting..
  • 【Clean & Precise Cut】B BOSI TOOLS professional copper pipe cutter set has 6 pieces of individual bearings allowing for increased cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting..
  • 【Easy to Use】Slide the cutting wheel feed mechanism into place, line up the cutting wheel with the cut line and tighten handle, rotate cutter around tube, tighten knob every few turns until wheel cuts through, use reamer to smooth the edges of the cut..
  • 【Widely Application】This convenient tubing cutter combo is a must-have for any toolbox. Ideal for refrigeration and plumbing programs. The cutter allows you to easily cut metallic tubing with a simple one-handed operation..
  • 【Durability & Practicality】Heat treated alloy steel cutting wheel and high-grade steel construction make our heavy-duty copper tubing cutters perfect for plumbing, electrical, air conditioner installation, automotive, and DIY applications..
Check Stock

Bonvoisin 3/8 1/2 OD Tubing Bender 2 in 1 Manual Pipe Bender 180° HVAC Soft Copper Aluminum Pipe Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for copper / aluminum pipes.
  • [High Quality] - The tube bender is forged from high-quality carbon steel, which is light and durable.(NOTE: if the pipe wall thickness.
  • [2-in-1] - This tubing bender tool is a 2 in 1 tool and will fit 3/8’’、1/2’’ tubes, which is convenient for different size tube bending and....
  • [Humanized Design] - (1)The manual pipe bender uses the principle of leverage, with which you can easily bend the pipe. (2)The round hole of the upper....
  • [Wide Applications] - This pipe bender is suitable for HVAC, air conditioning, and refrigerator pipe repairs..
Check Stock

ICOOL Inner-Outer Pipe Reamer/Tube Deburring Tool 3/16 to 1-5/8 inch for Copper PPR PVC Brass Aluminum Soft Steel Tubing and Pipes

  • 【Capacity】The reamer is suitable for the diameter of tubing and pipes from 3/16 to 1-5/8 inch..
  • 【Versatile Tools】Prepares for tubing soldering, removes burrs from sharp edges, such as copper, PPR, PVC, brass, aluminum, soft steel tubing and....
  • 【Efficient Tools】Specifically designed for various tubing with tight space. The reamer is suitable for the inside and outside of the pipeline to....
  • 【Sturdy Design】Long wearing steel blades for a long service time. Grooved durable hard plastic body for better grip..
  • 【Multiduty】Reamer can work perfectly especially in tube cutting, deburring copper pipes in the air conditioner installation and vehicle repair..
Check Stock

YFIXTOOL 77PCS Air Conditioning Leak Test Kit, Air Conditioning Leak Detector, A/C Compressor Detection Repair Tool Kit

  • 【Feature】The kit help to find the leak site quickly and accurately without disassembling the system..
  • 【Scope of Application】It can work for air-conditioning compressor, radiator, air-conditioning piping, evaporator. Fit for European and American and Asia car..
  • 【Specification】The kit of air conditioning leak test kits are made of pure copper..
  • 【Efficiency】The kit is easy to use and can saving time and effort..
  • 【Kindly Note】We provide 24-hour frendly customer service. If you have any questions, please feel free to contact us..
Check Stock

JoyTube 5/32”ID Clear Vinyl Tubing, 5/32”ID X 1/4”OD 10 Feet Flexible PVC Hose BPA Free Non Toxic Plastic Tube Air Water Oil Hose Line

  • Crystal-clear Vinyl Tubing is made of high quality PVC material, lightweight, flexible resistant to abrasions and corrosion..
  • Temperature Range : 23°F to 149°F (-5°C to 65°C).
  • Low Pressure and temperature Applications, tubing could be used in industrial and agricultural, engineering, fish farming, drip irrigation, drain, pumps, siphon, filters, air conditioning, laboratory applications for transferring liquid and gas, such as air hose for fish tanks and aquarium, ponds, indoor water garden and other home uses..
  • This plastic tubes are easy to use, shape, and bend and can be easily cut by any cutting tool. Smooth interior and exterior that prevents sediment accumulation and allows easy flow and flushing..
  • PVC tubing is suitable for general industrial applications for the conveyance of liquids, and semi solids. Hose can be used with most barbed fittings and connectors..
Check Stock

Libraton Tubing Cutter 3/16\ to 1-1/8\

  • SPECIFICATIONS: Libraton Mini Tubing Cutter is designed to cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 3/16" to 1-1/8" ( 4-28mm ) Outer Diameter OD..
  • GREAT FOR SMALL SPACE: This tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • HIGH PERFORMANCE CUTTING BLADE: Blade of our pipe cutter is made of most durable and high quality Alloy Steel for quick and clean cut..
  • STURDY: The copper tube cutter body is made of light weight and durable heavy duty alloy steel, 2 flare groove rollers for precision cuts operation, strong corrugated knob for comfortable stable operation..
  • EASY TO OPERATE & AFTER-SALE SERVICE GUARANTEE: Rotate the knob to grip tube, revolve copper tubing cutter around the tube, tighten grip smoothly after each full circle until full cut. Please let us know if you have any problem with this copper tube cutter. Our service team promise to reply to any of your messages within 24h..
Check Stock

HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubin

  • HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubing.
  • This is a heavy duty steel Flaring and Swaging Tool Kit for flaring and Swaging copper tubing.With this Flaring and Swaging Tool Kit you can flare or....
  • Copper tubing flaring tool + copper tubing swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation Self centering, slip-on forged steel yoke Blow....
Check Stock