Categories

Best Copper Alloy Bearings

CG2-11 PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING PIPE BEVELING ​MACHINE

  • ...er deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel tubing.Long-wearing alloy steel blades can extend the lifetime..
  • 【Good Helper】Our tubing cutter set is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mech....
Check Stock

B BOSI TOOLS Tubing Cutter, 3/16 to 1-3/8 inch Outer Diameter Heavy Duty Pipe Cutter of Aluminum, Copper, PVC, Thin Stainless Steel Tube

  • 【Large Cutting Capacity】This tubing cutter quickly and easily cuts 3/16" to 1-3/8" copper, brass, aluminum and plastic tubing, precision designed and constructed with thrust bearing feed for smooth cutting action. Each tool is tested to ensure accurate spiral free cutting..
  • 【Clean & Precise Cut】B BOSI TOOLS professional copper pipe cutter set has 6 pieces of individual bearings allowing for increased cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting..
  • 【Easy to Use】Slide the cutting wheel feed mechanism into place, line up the cutting wheel with the cut line and tighten handle, rotate cutter around tube, tighten knob every few turns until wheel cuts through, use reamer to smooth the edges of the cut..
  • 【Widely Application】This convenient tubing cutter combo is a must-have for any toolbox. Ideal for refrigeration and plumbing programs. The cutter allows you to easily cut metallic tubing with a simple one-handed operation..
  • 【Durability & Practicality】Heat treated alloy steel cutting wheel and high-grade steel construction make our heavy-duty copper tubing cutters perfect for plumbing, electrical, air conditioner installation, automotive, and DIY applications..
Check Stock

Saw Set Pliers, Zinc Alloy Copper Alloy Saw Set Tool Handsaw Set Pliers Woodworking Hand Tools Sawset Puller DIY Accessories 18 7 3cm for Woodworking Saw Blades

  • High Quality: Zinc alloy & copper alloy saw set tool is 100% brand new and has high quality. Saw set puller is a great addition to any serious tool collection..
  • Making Material: Saw set puller is made of high quality zinc alloy and copper alloy, which is durable and sturdy..
  • Scope Of Application: Zinc alloy & copper alloy saw set tool is specially used for woodworking saw blades..
  • Fine Quality Tool: Zinc alloy & copper alloy saw set tool is a fine quality tool that will provide years of service..
  • Quality Service: We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

Riedell Skates - Boost - Indoor Quad Roller Skate | Size 7 |

  • TOP QUALITY CRAFTSMANSHIP - These precision bearings come equipped with heat-treated steel alloy balls that can endure long-lasting use..
  • OFFERS SUPERIOR ROLL - The KwiK bearings' chrome steel races resist corrosion. These bearings provide strength and support to create a performance with the most roll..
  • FRICTION RESISTANT RETAINERS - These roller skate bearings come equipped with friction resistant Delrin retainers. These premium retainers come pre-spun with high-performance oil..
  • ENVIRONMENTALLY CONSCIOUS CONSTRUCTION - The KwiK Zenith bearings use top-quality parts in a clean room free of environmental pollutants..
  • GREAT WHEELS, GREAT VALUE - The Kwik Zenith bearings offer the same great performance as other KwiK bearings at a more reasonable price. This is not a childrens product and not designed or intended for use by children 12 years of age or younger..
Check Stock

Mongoose Unisex-Youth Alloy Scooter Wheel, Black/Gum, 110mm

  • Alloy Core - These alloy core wheels focus on strength, durability and reliability in a lightweight design..
  • ABEC 9 Bearings - Genuine ABEC 9 bearings for high precision and low friction. Guaranteed to create a fast rolling set-up..
  • Fraction PU Blend - Using our proprietary PU blend we have found the perfect balance of fast rolling and optimal grip..
Check Stock

uxcell Bearing Sleeve 8mm Bore x 12mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 3pcs

  • Bore: 8mm, Outside Diameter: 12mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 10mm Bore x 16mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 6pcs

  • Bore: 10mm, Outside Diameter: 16mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 6mm Bore x 10mm OD x 6mm Long Self-Lubricating Sintered Bronze Bushings 10pcs

  • Bore: 6mm, Outside Diameter: 10mm, Length: 6mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

Ski-Doo OEM Chaincase XPS Synthetic Oil/Lube/Lubricant Chain/Gear Case Fluid 12oz 293600138

  • GEAR LUBRICANT: GL-4 Multi-Purpose Gear Oil has low pour points and high temp properties to provide lubrication over a wide temp range. Our formula contains anti-rust and anti-wear EP additives to provide corrosion protection in drives and hypoid gears..
  • MULTI-PURPOSE: Our formula is not corrosive to copper.
  • or other non-ferrous alloy bearings and bushings..
  • APPLICATIONS: This multi-purpose oil is suitable in use for auto.
  • and differentials requiring API/GL-3 and GL-4 oils. Safe for use on yellow metals..
  • PRODUCT SPECIFICATIONS: This product is available in a 1 gallon bottle..
  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain.
  • household tools and electrical equipment..
Check Stock

Mimoke Bicycle Disc Brake Hub Front & Rear for MTB Freehub with 32 Holes 6 Bolt Quick Release Lever

  • Axles 7075 aluminum alloy ,Hub shell 6061 aluminum alloy , aluminum alloy material has super corrosion resistance, rust resistance. CNC Precision Technology Disc Brake, stable, durabl.
  • High efficiency and excellent sound. The classic freewheel system with 6 bolt /72 Clicks ..
  • 32-hole rear hub (QR), compatible with Shimano 7-11 speed and Sram 7-10 speed.
  • 6 Bolt 72 Clicks , 2 sealed bearings, Front: 9 x 100 mm, rear: 10 x 135 mm (with standard 5 mm diameter quick release) 32 holes, Precision-machined NBK bearings, low friction, strong sealing, can effectively isolate water, mud and dirt.
  • package contains two quick-release levers, which are easy to install and quick to remove!.
Check Stock

MATEWORK Pipe Cutter - Fast Tubing Cutter Set with Mini Cutter & Deburring Tool Pipe Cutter Tool for Cutting 3/16 to 2 Aluminum Copper PVC Stainless Steel Tube for Plumber and Home Working 3PCS

  • ...eburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel tubing.Long-wearing alloy steel blades can extend the lifetime..
  • 【Good Helper】Our tubing cutter set is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mech....
Check Stock

Toledo Pipe H4S 2\-4\ Heavy Duty Hinged Pipe Cutter fits RIDGID & REED Wheels

  • [Large Cutting Capacity] The cutter can cut 3/16 to 2-inch outer diameter and 1/10-inch thick pipe..
  • [Small Cutting Capacity] The cutter can cut 1/8 to 7/8-inch pipes with a maximum thickness of 1/10-inch. It can be used in narrow environments without restrictions..
  • [Deburring Tool] The deburring tool is made of solid plastic structure and high-speed steel. It can be quickly, cleanly and conveniently applied to the inner diameters of different pipes..
  • [Wide Application] The pipe cutting tool is very suitable for cutting heavy hard materials such as thin stainless steel and all hoses such as aluminum, copper and PVC..
  • [High-Quality] The alloy steel cutting wheel and high-grade steel structure after heat treatment are wear-resistant and rust free. The cutter kit has 6 independent bearings to increase the cutting speed. Accurate rolling control makes every cut in the pipe cutting process smoother and more accurate..
Check Stock

Riedell UPTOWN 120 BR Mens Rhythm Skates 2009 - Size 5

  • TOP QUALITY CRAFTSMANSHIP - These precision bearings come equipped with hardened Swiss chromium steel alloy balls that can endure long-lasting use..
  • OPTIMIZED DURABILITY - The KwiK Swiss Nitride bearings use a Titanium Nitride coating. This coating does not chip, flake, or degrade during prolonged rough use..
  • CORROSION RESISTANT DESIGN - The KwiK bearings' Titanium Nitride-coated races resist corrosion. They also provide strength and smoothness to create a performance with the greatest roll..
  • FRICTION RESISTANT RETAINERS - These bearings come equipped with friction resistant Delrin retainers that are pre-spun with high-performance oil..
  • SLEEK & LUXURIOUS DESIGN - The 8mm skate bearings come with a metallic gold finish, a design that is worthy of its performance. This product is not a children's product and is not designed or intended for use by children 12 years of age or younger..
Check Stock