Categories

Best Copper Annealing Machine

Uniweld Type28-6 Rosebud Heating Tip

  • Proudly Made in the USA and 100% Flame Tested.
  • Use with acetylene and oxygen to achieve temperatures up to 5600 degrees Fahrenheit.
  • Rosebud tips are your best choice for brazing, pre-heating, straightening, annealing, bending, forging, etc..
  • Overall length is 12″ and is ideal for HVAC/R brazing up to 6 inch copper tubing.
  • Type28 Tips fit United’s Part No. 71 and Part No. WH550 Welding Handles.
Check Stock

Uniweld Type17-30 Rosebud Heating Tip

  • Proudly Made in the USA and 100% Flame Tested.
  • Use with acetylene and oxygen to achieve temperatures up to 5600 degrees Fahrenheit.
  • Rosebud tips are your best choice for brazing, pre-heating, straightening, annealing, bending, forging, etc..
  • Overall length is 7 inches and is ideal for HVAC/R brazing up to 6 inch copper tubing in tight work space.
  • Type17 Tips fit United's Part No. 71 and Part No. WH550 Welding Handles.
Check Stock

Uniweld Type17-15 Rosebud Heating Tip

  • Proudly Made in the USA and 100% Flame Tested.
  • Use with acetylene and oxygen to achieve temperatures up to 5600 degrees Fahrenheit.
  • Rosebud tips are your best choice for brazing, pre-heating, straightening, annealing, bending, forging, etc..
  • Overall length is 7 inches and is ideal for HVAC/R brazing up to 2-5/8 inch copper tubing in tight work space.
  • Type17 Tips fit United’s Part No. 71 and Part No. WH550 Welding Handles.
Check Stock

Yosoo 1000W ZVS Low Voltage Induction Heating Board Module Tesla coil 12V-48V Flyback Driver Heater DIY

  • This section of induction heating using low-voltage DC power supply 12-48V Maximum current 20A, maximum power 1000W..
  • Tested 53V power supply when working properly..
  • Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment, Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient..
  • 24V input with no load current of 3A , 48V input with no load current of 6A.
  • The higher the voltage, the greater the heating current when the same thing, the effect is better, But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough..
Check Stock

Spring Steel Blade Dragon Head Katana Handmade Full Tang Japanese Samurai Sword Real Battle Knives Very Sharp Highlander Sword

  • Spring Steel (The blade can be bent 45 degrees Not be out of shape) HRC.
  • Hand Forged Full tang Blade (Iron Tang ,The handle is fixed with a copper nail, which is very stable and safe to use.).
  • BATTLE READY：hand forged 9260 spring steel, through Oil quenching,tempering, annealing teat treat process,Create a real combat ready blade with good hardness and High elasticity, easily meeting actual combat requirements..
  • VERY SHARP：The blades are hand polished , the blades are very sharp and can be used for real cutting swords, Tameshigiri ( for example, bamboo, trees,A4 paper (Small trees within 5cm in diameter were cut off with one stroke,We have a video of the actual test, which you can watch in the photo description)，.
  • Shinogi-Zukuri Blade Shape,Chu-kissaki,No Hamon,With Long Hi of each one side blade.
Check Stock

loveyitadj Hand Forged Damascus Folding Steel Sharp Full Tang Samurai Sword Katana Sword Real Ninja

  • Katana is 100% handcrafted with sharp edges and functionality. Using traditional hand forging methods: annealing, tempering, quenching and other....
  • Very sharp: The blade is hand polished, the blade is very sharp and can be used for real cutting swords, Tamesigiri (eg bamboo, trees, A4 paper)..
  • BATTLE READY: Hand forged Damascus folding steel, through oil quenching, tempering, annealing nipple treatment process, to create a real combat blade,....
  • MARTIAL ARTS SWORDS---This swords real weapons sharp,Very suitable as a collectible,It is also very suitable as a gift to like-minded friends,But....
  • We provide lifetime free warranty service, if you have any questions, you can always contact us,We will get back to you within 12 hours..
Check Stock

Copper Sword

  • Copper rod for DIY,for copper bracelet,copper ring,hobbies..
  • Copper rod for lichtenberg machine fractal wood burning machine..
  • Copper rod for model car model ship model plane,for knife making,metal crafting..
  • Easy to hang,packaged by a plastic tube container made by Germany Rose-Plastic Company..
  • Copper rod UNS C11000 Cu 99.90% include Ag,Hardness HV95..
Check Stock

1800W ZVS Induction Heating Board Module Low Voltage High Frequency 12-48V Flyback Driver Heater with Tesla Coil and Cooling Fan

  • ...ooling fan interface, can also do Tesla discharge, generator voltage inverter, etc.
  • The induction heating circuit adopt 12-48V DC power supply, maximum current is 40A, the power uo to 1800W. It can work continuously under the condition of good heat dissipation. moderate power which make it can be used to quenching, annealing and other heat treatment. also for melted with graphite crucible kim/silver/ copper/aluminum and so on, heating is evenly and fast.
  • it is recommended that not exceed 48V 35A to prevent accidents and damage,Although withstand more than 40A current.Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, which is very dangerous.More than 24V/20A power supply, the greater the voltage/current, the greater the heating power, heating faster..
  • please check the power output meets the requirements if the MOS tube fever,and be sure to do a good job of cooling.Do not empty the board, otherwise it will create a very high noise, then MOS tube will burn out.
  • please do not to heat too large metal, otherwise it may be overloaded, please add a 35A fuse or ammeter and air switch for better use (not included)..
Check Stock

Ququyi 99.9% Pure Copper Round Rod 5/8\ OD 4\ Length Bare Copper Cu Metal Rod for Metal Craft Hobbies,Knife Making

  • Copper rod for DIY,for copper bracelet,copper ring,hobbies..
  • Copper rod for lichtenberg machine fractal wood burning machine..
  • Copper rod for model car model ship model plane,for knife making,metal crafting..
  • Easy to hang,packaged by a plastic tube container made in Germany..
  • Copper rod UNS C11000 Cu 99.90% include Ag,Hardness HV95..
Check Stock

28mm Tattoo Machine Copper Coils, Coils Tattoo Machine Liner Shader Tattoo Gun Safe Tattoo Copper Coil Parts, Shader Professional Tattoo Beauty Salon for Liner

  • HIGH-QUALITY AND DURABLE: Professional Tattoo Coils, The copper coil of the tattoo machine is made of high-quality materials, safe and environmentally friendly, strong and durable. The use time is even longer..
  • DOUBLE COIL DESIGN: Wrap Copper Wire, The tattoo machine adopts a double coil design with a standard 10-turn coil, which is convenient and practical. More powerful performance..
  • GOOD REPLACEMENT: Tattoo Wrap, The special coil for tattoo coils is easy to install and disassemble. It is an important replacement part for tattoo artists..
  • HIGH-QUALITY CRAFTSMANSHIP: Tattoo Machine Accessory, Superb craftsmanship, good performance, long-term work will not be hot. Has a good grip..
  • BETTER COPPER CORE WIRE: Tattoo Machine Copper Coils, Built-in high-quality copper core wire has better conductivity and permeability. Use more stable..
Check Stock

Copper Foil Tape 3 X 275 with Conductive Adhesive for Guitar & EMI Shielding,Crafts Electrical Repairs Grounding

  • ADEQUATE COPPER FOIL TAPE - Each roll is 75mm x 7m.
  • Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully..
  • ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables..
  • EMI SHIELDING COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference..
  • TAPE FOR PLANTS - You can wrap copper tape around the base of small plants and seedlings to protect plants. Copper conductive adhesive tape can be applied to stained glass, paper circuits, electrical repairs, soldering, grounding..
  • DUAL CONDUCTIVITY - The conductive copper foil tape has dual conductivity so current will flow through both sides and the adhesive. No need to worry that the adhesive tape will reduce the effectiveness between components..
Check Stock

Sudamlasibazaar- Turkish Sand Coffee Copper Sand Brewer Machine Turkish Coffee Machine Coffee on Sand Restaurant Hotel Coffee Shops Sand Coffee Maker Sand Coffee Machine

  • THIS MACHINE DISINFECTED ! Dimensions: 14.20 x 11.40 x 6.30 inches, 9 kgs weight with sand. The sand coffee machine works with 110-220 Volts with the....
  • Finely grounded coffee, water, sugar if desirable and a little cardamom inside the Copper Cezve Ibrik on the notorious sand coffee machine. Just as it....
  • Please check the Description section for the best way to brew your delicious coffee on the sand coffee machine. Turkish sand coffee requires the....
  • The sand coffee machine crafted from copper brews the perfect Turkish - Greek coffee in a few minutes. The sand coffee machine has a stainless steel....
  • We send a complimentary 1 copper pot(as in the picture) as a gift with the product. We added a photo all our product design. We will send 1 machine,....
Check Stock

LOVIMAG Copper Foil Tape (2inch X 33 FT) with Conductive Adhesive for Guitar and EMI Shielding, Crafts, Electrical Repairs, Grounding

  • ADEQUATE COPPER FOIL TAPE - Each roll is 50mm x 10m.
  • Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully..
  • ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables..
  • EMI SHIELDING COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference..
  • TAPE FOR PLANTS - You can wrap copper tape around the base of small plants and seedlings to protect plants. Copper conductive adhesive tape can be applied to stained glass, paper circuits, electrical repairs, soldering, grounding..
  • DUAL CONDUCTIVITY - The conductive copper foil tape has dual conductivity so current will flow through both sides and the adhesive. No need to worry that the adhesive tape will reduce the effectiveness between components..
Check Stock