Categories

Best Copper Base Pcb

Liftmaster K001A6837 Logic 4 Board Commercial OEM Genuine

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

zgs78hh 18V Battery Chip Protect Board Replacement Battery Protection, Circuit Board for Makita BL1830 BL1850

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

Thermaltake Pacific V-GTX 10 1080/1070 Nickel Full Cover Transparent GPU Water Block, Clear CL-W134-CU00TR-A

  • Compatible with NVIDIA GTX 1080 founders Edition and GTX 1070 founders Edition graphic cards.
  • Transparent design: Offering a Transparent full cover water block for ideal coolant viewing and proper protection of PCB components.
  • Copper cold plate: nickel plated copper cold plate provides exceptional cooling performance and protection.
  • Micro-channel structure: featuring 0.5mm micro-channel fin construction for extreme heat dissipation.
  • Back plate included: gain proper protection to the back of the PCB with a custom 4mm thick aluminum alloy back plate..
Check Stock

YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB

  • Package Included: 1x plate.There is no screws and copper stand included..
  • Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
  • This plate is anodized brush finished.It can only use with plate mounted stabilizers.
  • If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..
Check Stock

Helping Hands Soldering, Toolour Magnetic Helping Hand for Soldering, 4 PCB Circuit Board Holder and Flexible Helping Arms, Third Hand Tool with Heavy Duty Base for Electronic Repair Hobby Craft

  • Helping Hands Soldering: Circuit Board Holder has 4 pillars, each pillar is magnetic, adjustable magnetic helping hands can be positioned anywhere on the heavy steel base, which can support any shape of the board. Completely free your hands and let you focus on the soldering detail work once start using our excellent third-hand soldering tools..
  • Magnetic Helping Hand Tool: 4 flexible metal gooseneck arms with strong magnetic base, which have a powerful attraction to the steel base. We included two 9.8″ arms, two 5.9″ arms helping hand arms, completely free your hands up and work easier than ever before. The 360° rotating alligator clip allows you to be more flexible in welding work..
  • Magnetic PCB Holder Pillars: 4 small pillars can hold a PCB board by their multi-layer or tips through the location hole component point. Full metal body is anti-rust and corrosion-resistant, powder-coated promises a longer usage. To make sure the PCB you worked on can be positioning steadily, the pillars’ tips are better to hold boards by 4 location holes..
  • Stainless Steel Base: 9″ x 5. 9″ heavy duty base with industrial-grade weighted construction, never tip over, powder-coated iron base. 4 pcs rubber feet prevent the stable soldering station from sliding ....
Check Stock

FDSF USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding, 30cm

  • The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened, so that the transmission current is more powerful. Support up to 3A..
  • The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF short circuit phenomenon, and the product is durable..
  • Product application: GPS navigator, storage device, imaging device, for Pi 4 for MCU development board, built-in USB device to extend the use of , convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc..
  • Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector..
Check Stock

RAITO 4.8-Inch AM FM Radio Short Antenna Compatible with 1999-2022 Toyota Tundra

  • ✔ STYLISH ADDITION TO YOUR VEHICLE: RAITO short antenna fits Toyota Tundra 1999-2022.
  • ✔ FUNCTIONAL AND DURABLE DESIGN: Functional and Intended for AM/FM radio signal. Built-in signal PCB board and highly conductive copper coil to....
  • ✔ AWESOME LIGHTWEIGHT AND COMPACT: 4.8 inches long. RAITO short antenna provides the same reception quality as the factory one but will not block....
  • ✔ EASY SCREW ON INSTALLATION: No wiring involved, no tools needed. Easy to install by hand within a minute, just screw the stud into the car base,....
  • ✔ BUY WITH CONFIDENCE: RAITO is dedicated to address any product/service issues and is committed to delivering the best experience for all buyers.....
Check Stock

Circuit Board Holder with Adjustable Heavy Duty Base Large Soldering Helping Hand Vise 360° Rotated For Clamping PCB solder DIY Printed Circuit Board Stand NEWACALOX

  • Non-slip PCB clips: The PCB clips on the holder is easy flips printed circuit boards 360°, use better elasticity springs to avoid slipping, easily....
  • Sturdy construction and easily adjusted. The Soldering helping hand holder is made of aluminum alloy and has 3 screws to tighten and fix, heavy and....
  • Equipped with 4 rubber feet under the base ensure stability, so the holder will not slide around on the bench. keeping safe. the base is solid and....
  • Adjustable PCB holder frame: The rolling bearing makes the bracket move more smoothly without jamming, the ability to rotate is great for switching....
  • Easy to Install and easy to use: It is very convenient to insert the pcb board and easy to remove. You could make any position adjustment you want by....
Check Stock

1769-OA16 Compact I/O 16 Point Output Module 1769OA16 1 Year Warranty

  • Pitch 3.81mm/0.15" screw terminal block..
  • Terminal block: wire range 26-16AWG, strip length 5mm, Metric M2 slotted screw..
  • FR-4 fiber glass PCB, dual copper layers..
  • Module Dimensions: 83mm x 87mm x 45mm (W x L x H)..
Check Stock

Phanteks Glacier Radeon VII for AMD Radeon VII, Nickel-Plated Copper Base, Aluminum Cover, Acrylic Cover, Digital RGB Lighting, Full Water Block, Black

  • Compatible with AMD Radeon VII Graphics cards. Full water-block that covers the entire PCB for direct cooling.
  • 6mm copper base for a higher level of heat dissipation and transfer. Compatible with the original Radeon VII graphics cards backplate.
  • Greater fin surface area. Viton rubber washer for retaining seal force and prevent leaks.
  • Significantly reduced flow resistance for an outstanding cooling performance..
Check Stock

Alphacool Eiswolf 2 360mm AIO GPU Cooler with Backplate RX 6800/6900 XT Nitro+

  • Active cooling backplate：The newly developed and designed graphics card backplane water block covers the entire back of the PCB, which effectively....
  • Jet type micro channel structure:The 0.5MM gap has strong passability, even when using color powder or nano-silver water-cooling liquid, it is not....
  • T2 high-purity copper plate: The heat-absorbing plate of the water block is made of the national standard T2 high-purity purple plate, the base....
  • Suggested water way: The new bridge module is used for Unicom's graphics card water cooling head and backplane water cooling head. It is small in size....
  • Heat dissipation cooling water-cooled head backplate: The water-cooled head is equipped with an exclusive backplane of high-quality electroplated....
Check Stock

MSI B550-A PRO ProSeries Motherboard (AMD AM4, DDR4, PCIe 4.0, SATA 6Gb/s, M.2, USB 3.2 Gen 2, HDMI/DP, ATX)

  • Support for 3rd Gen AMD Ryzen processors and future AMD Ryzen processors with BIOS update.
  • Supports dual channel DDR4 memory up to 128 GB (4400 MHz).
  • Lightning Fast Game experience: PCIe 4.0, Lightning Gen 4 M.2 with M.2 Shield Frozr, AMD Turbo USB 3.2 GEN 2.
  • Core Boost technology combines optimized power circuit layouts and digital power regulation which allows for precise and steady current delivery to the CPU.
  • AUDIO BOOST rewards your ears with studio grade sound quality for immersive gaming experiences.
  • Premium Thermal Solution: Heatsink thermal pad rated for 7W/mk and PCB with 2oz thickened copper.
  • Flash BIOS Button lets users flash the BIOS even without a CPU or memory.
  • Powerful Design: Core Boost, Digital PWM IC, 2oz Thickened Copper PCB, Creator Genie, DDR4 Boost.
Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 10 Pcs Print Circuit Board Drill Bits, 0.1mm to 1.4mm Drill Bits Carbide Drill Bits Tool Set(0.1mm)

  • Cutting Edge Diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.7mm, 1.2mm, 1.3mm, 1.4mm(Optional).
  • Drills bits are perfect for delicate drilling through hard materials for model engineering, jewelry repairs, craft work, suitable for PCB, SMT, CNC, mold, sculpture, plastic, copper, stainless steel..
  • Drill bit has a large scraps discharge space,reduce cutting force and broken drill,little resistance and smoothly during the scraps discharge,improve the quality of hole wall..
  • PCB drill bits are easy to change out and do a great job cutting through the PCB for solder holes.Come in a great storage container that is easy to grab the drill bit you need when you need it..
  • These bits are made of high quality materials,work fantastic on PCB boards. Sharp and twisted flute will make the drilling be more easy..
Check Stock