Categories

Best Copper Capillary Tube

12 Pieces Solder Wick Solder Braid Wick Set Desoldering Braid Wick (2.0 mm, 2.5 mm, 3.0 mm)

  • Low residue design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time to clean it.
  • Quality material: the desoldering wicks are made of quality copper wires, and the design of precise weaving can improve the capillary effect and the redundant solder absorbing ability, increasing the work efficiency.
  • Extensive applications: the braided solder wicks are suitable for labs, home, school and industry welding work.
  • And the wicks adopt fine braid design to promote strong capillary action, bringing more convenience for your daily work.
Check Stock

CDN Large Dial Cooking Thermometer

  • For temperature measuring on refrigeration equipment, chilled systems etc.
  • 48" copper capillary, white plastic covered.
  • "Range: -40-65 deg F/-40-20 deg C, reading can be re-calibrated".
Check Stock

1/2\ Od X 2 Ft. Straight Copper Tubing Type K Kh03002

  • Copper Tube Shape Straight, Hard, Application Water, Copper Tube Coating None, Temp. Range 100 Degrees F to 400 Degrees F.
  • Standards ASTM B280, ASTM B306, ASTM B819, ASTM B88.
  • Max. Pressure 1130 psi, Tube Length 2 ft, Copper Tube Type Type K.
  • Tube Size 3/8 in, Inside Dia. 0.375 in, Outside Dia. 1/2 in, Wall Thickness 0.049 in.
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • ...desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
  • 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
  • 【Widely used Solder Remover】:The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from d....
Check Stock

TOWOT Solder Wick Braid with Flux No-Clean Electronic Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10 L 5

  • Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder..
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering..
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work.
  • And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work..
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it..
  • Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!.
Check Stock

MASTERCOOL (70025 Black Capillary Tube Cutter

  • SUPERIOR QUALITY will not collapse the tube and provides a smooth, clean cut.
  • HARDENED STEEL CONTRUCTION provides years of reliable service.
Check Stock

Honeywell T100B1035 Zone Valve Operator

  • Requires no electrical connection, self powered.
Check Stock

TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 9.8'

  • Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder..
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering..
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work.
  • And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work..
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it..
  • Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!.
Check Stock

Quickun Copper Tube 1/12\ ID × 1/8\ OD (2-3mm)Seamless Round Pipe Tubing (6.56FT)

  • 【Size】: 1/12" ID - 1/8"OD (2-3mm) | Tube Wall: 1/48" | Length: 6.56 Feet.
  • 【Duarble Material】: Soft copper pipe copper pipe is made of high quality copper material, corrosion resistance, excellent ductility and electrical conductivity, can adjust the required length of their own processing. The surface is smooth without seam..
  • 【Good Thermal Conductivity】: Used in manufacture of magnetism instruments or meters..
  • 【Wide Range Of Use】: Soft copper tube as refrigeration tube coil tube is widely used in refrigerators, freezers, air conditioners, DIY projects, hobbies, crafts, architectural models, architectural decoration, frame, industry, gardening products, electrical and thermal conductivity, etc..
  • 【Wonderful Plasticity】: Easy to work under hot and cold pressure. The floppy copper tube can be bent and deformed as needed to meet different needs..
Check Stock

Nozzles Irrigation System Misting Automatic Watering Garden Hose Spray head with 4/7'' PE Hose and Cconnector 10m (10)

  • 4/7 capillary tube 10 meters (tube size is about 4mm inner diameter 4mm outer diameter 7mm), 1 8mm quick connector, quarter..
  • 1 nipple connector, 9 single gray fog +47 flat tees, 9 single gray fog +47 single hook, 10 cable ties..
  • The spray nozzle has good atomization effect, and can be adjusted to a thin water line. The spray in the air will become a small rain effect, which is convenient and practical..
  • It is suitable for family watering flowers, cooling the balcony and courtyard, and irrigation in the greenhouse..
  • Easy installation, water saving, labor saving, time saving and more practical! (Before taking over, scalding with boiling water for about 10 seconds. This will make connection easier).
Check Stock

NTE Electronics SW02-10 No-Clean Solder Wick 4 Blue.098 Width 10 Length

  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
  • Available with standard or anti-static bobbins.
Check Stock

Elkay EZSTLR8SC ADA Compliant Barrier Free Dual-Level Water Cooler with Cane Apron, 8 Gallons Per Hour

  • Refrigerant type HFC-134a accurately controlled by a calibrated capillary tube.
Check Stock

XIFOWE Copper Tube 1/4 OD x 3/16 ID 5 Ft Tube Wall 1/32 Refrigeration Seamless Round Pipe Tubing Soft Coil Copper Tubing Used In Refrigerators Freezers Air conditioners DIY projects Etc

  • 【Size】✔ 1/4" OD - 3/16" ID (6.35-4.75mm) | Tube Wall: 1/32" (0.8 mm) | Length: 5 Feet (1.524M). Note that the actual length of the copper tube is slightly longer than 5FT because it is measured manually. In addition, when we cut the copper pipe, we used a ring cutter, which will deform the section surface, resulting in a smaller inner diameter from the section surface. Please rest assured that this will only affect the size of the section surface, but not the actual size of the copper pipe..
  • 【Material】✔Soft copper pipe copper pipe is made of high quality copper material, the surface is smooth without seam. Note, because it is made of pure copper, so the surface is inevitably easy to oxidation and discoloration, can be polished with high mesh sandpaper, will become bright and clean!.
  • 【Good Thermal Conductivity】: Good heat dissipation and refrigeration capability, high strength at low temperature. This is a good choice for refrigerators, freezers, air conditioners and other refrigeration equipment.
  • 【Shape Changeable】Soft, Because copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle. Or used in manufacture of magnetism instruments or meters..
Check Stock