Categories

Best Copper Fitting Valve

Vobor Inflatable Boat SUP Pump Adaptor Standard Conventional Black Air Valve Adapter Attachment Air Pump Converter for Inflatable Rowing Boat Stand Up Kayak Paddle Board

  • Leightweigh DesignThe Inflatable Boat SUP Pump Adaptor adopts fine workmanship and delicate design, convenient to use..
  • Sturdy and DurableThis Boat SUP Air Valve Adapter is made of high quality of Copper and rubber, resistant high pressure, durable to use..
  • Widely UseOur Air Pump Converter fits most paddleboards, canoes, rubber boats, assault boats, flushing pools, floating rows, inflatable beds, dinghy, kayak, etc..
  • Quick InflationInflatable SUP valve adaptor, easy conversion, quick inflation.Use your compressor or tire pump to easily reach suggested PSI within 5-10min..
  • Instructions With the valve in the closed position, insert the Schrader valve fitting and rotate to lock in place. Remove the cap on the fitting, and connect a standard electric pump.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand until it becomes difficult to pump, and then use the adaptor to top off the pressure..
Check Stock

Valve Stem Extenders,4Pcs 7Inch/180mm Dual Flexible Stainless Steel Braided Valve Stem Extensions,6Pieces 45 90 135 Degree Brass Valve Adaptors for Car Truck Motorhome Trailer RV Trailer Vehicle

  • ... tire pressure difficult ?Start. Right Now!Just Install this schrader valve stem extension.Fast and effortless make regular tire pressure checks，increase you safety on the road..
  • 【EASY INSTALL&SAFETY】Simple to install, no tools required, The built-in core allows inflation and deflation. Just screw on, the stem fitting rotates on the extension shaft allowing you to set at any position and locks to your desired position and seals when finger tight..
  • 【PACKAGE INCLUDE】4Pcs 7Inch Stainless Steel Tire Tyre Valve Extension Adaptors,2 pieces of 45 degree extenders, 2 pieces of 90 degree extenders and 2 pieces of 135 degree extenders, 1x Valve Core Remover,enough for yours checking and inflating works..
Check Stock

Valve Stem Extenders,4Pcs 7Inch/180mm Dual Flexible Stainless Steel Braided Valve Stem Extensions,6Pieces 45 90 135 Degree Brass Valve Adaptors for Car Truck Motorhome Trailer RV Trailer Vehicle

  • ...Install this schrader valve stem extension.Fast and effortless make regular tire pressure checks，increase you safety on the road..
  • 【EASY INSTALL&SAFETY】Simple to install, no tools required, The built-in core allows inflation and deflation. Just screw on, the stem fitting rotates on the extension shaft allowing you to set at any position and locks to your desired position and seals when finger tight..
  • 【PACKAGE INCLUDE】4Pcs 7Inch Stainless Steel Tire Tyre Valve Extension Adaptors,2 pieces of 45 degree extenders, 2 pieces of 90 degree extenders and 2 pieces of 135 degree extenders, 1x Valve Core Remover,enough for yours checking and inflating works..
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • ...e puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fa....
Check Stock

Aupoko A/C Retrofit Valve Kit, Retrofit Valve with Dust Cap Convert, BPV31 Bullet Piercing Tap Valve Line Tap Valve Kit, Fits for HVAC Refrigerant System R12 R22 R502 R134A

  • ... Use a hex key wrench to install, its compact design only requires a 2-inch clearance area for installation and use..
  • ❄ Package Included — R12 to R134A retrofit conversion adapter with dust cap, BPV31 bullet piercing tap valve, a hex key, 2 adapters..
  • ❄ 1 YEAR WARRANTY — Order R12 to R134A retrofit conversion fitting kit from Aupoko, we offer 1 YEAR WARRANTY, true worry-free shopping experience. Should be there any question, please feel free to contact us..
Check Stock

LASCO 19-5513 Straight Ball Valve Compression Fitting with Integral Sleeve Nut, 3/8-Inch OD Tube and 3/8-Inch Female Pipe Thread, Nylon/Plastic

  • Nylon compression fitting with integral sleeve nut.
  • 3/8-inch od tube x 3/8-inch female pipe straight valve.
  • No need to disassemble fitting, just loosen the nut insert tubing, then tighten.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock

TRIPHIL Shower Flow Control Valve, Brass Body Brass Handle Shut Off Valve for Handheld Shower Head or Rain Showerhead Handheld Bidet Sprayer, Water Volume Regulator Adjust Valve Chrome 2 Packs

  • Brass Body: Brass body construction provides much higher performance (high heat-resistance and pressure-resistance) and durability than plastic ones, ceramic disc cartridge internal, ensuring quality and longevity.
  • Universal Connections: 1/2 IPS male and female threads, standard size. Universal fitting for connecting shower heads, shower arms, toilet bidet sprayers and hoses pipes Beautiful Finish: Oil Rubbed Bronze Finish: Rust-resistant, resists daily corrosion, scratches and tarnishing.
  • Water Flow Controller: Can be used as shut-off valve or water saver valve, installed between the shower arm and the shower head.
  • Easy Operation: Inner ceramic valve for smooth operation, seals well without leaking, adds this valve to a dripping shower head without replacing all the plumbing.
  • Sturdy and durable: it's made by Solid BRASS/COPPER with CERAMIC disc valve.
Check Stock

4Pcs 7"/180mm Flexible Valve Stem Extenders Stainless Steel Tyre Tire Valve Stem Extension Adaptors Car Truck Trailer RV Trailer Vehicle (4Pcs 7"/180mm)

  • 【PERFECT SOLUTION】Check your inner dual wheel tire pressure difficult ?Start. Right Now!Just Install this schrader valve stem extension.Fast and effortless make regular tire pressure checks，increase you safety on the road..
  • 【EASY INSTALL&SAFETY】Simple to install, no tools required, The built-in core allows inflation and deflation. Just screw on, the stem fitting rotates on the extension shaft allowing you to set at any position and locks to your desired position and seals when finger tight..
  • Universal Type: Work With Tire Valve Directly, Have A Clamp / Fastener To Work Directly with Dual Wheel. Easy Work. Fits standard valve cap treads.High temperature 100% leak-tested nickel-plated copper valve cores and rated up to 150 PSI.Perfect fit for Truck tires, RV, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer or other heavy dualies wheel vehicles, etc..
  • Material:304 stainless steel Length: 7 Inch,approx 180 mm.Fit for trucks, RVs, campers, trailers, or other heavy vehicles.
  • Included: 4Pcs 7Inch Tire Tyre Valve Extension Adaptors，enough for yours checking and inflating works..
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...ssion sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nu....
Check Stock

Ice Maker Water Valve 241803701 242252603 240519601 For Frigidaire Refrigerator New

  • Actual #’s on valve: 242252603 RIV-11AE 8F-140319.
  • Angled valve bracket is easily bendable with pliers.
  • Refrigerator Water Inlet Valve,This valve will fit most brands such as Frigidaire, White Westinghouse, Tappan, Gibson, Kelvinator, Sears, & Kenmore.
  • It is a single solenoid valve with a 1/4″ inlet & outlet which is standard. This valve has the new “John Guest” style fitting which allows you to just push the waterline directly into the valve from the ice maker. It’s that easy and no leaks! The other end will have the standard 1/4″ compression fitting that your supply line will hook to. This valve will work with most all refrigerators that have the freezer on top or bottom. It will NOT work with a refrigerator that has a water filter built in.
  • Included: (1) Valve, (1) 1/4″ Waterline, (2) Mounting Screws.
Check Stock

SeonFook 6 PCS Swaging Tool Drill Bit Set 1/4-Inch Hex Shank HVAC Tool Copper Pipe Flaring Bits Portable Tube Expander Drill Bit Repairing Kit 1/4 3/8 1/2 5/8 3/4 7/8

  • 【Swaging Tools】 Come with 6 different sizes: 7/8'', 3/4", 5/8", 1/2", 3/8", 1/4".
  • Hex Shank Diameter: 1/4 inch. They can meet your various work....
  • 【Flaring Bit Set】Made of high quality bearing steel for durability and long life. Flares drill bits have high and uniform hardness and wear....
  • 【Pipe Expander】The innovative drill bit expander for expanding tubes using heat by friction way more surface of between the flare and the Valve.....
  • 【Copper Pipe Swaging Tool】When air conditioning is installed, expand copper tube, make two copper tube mutual link (The drill bit is installed on....
  • 【Drill Bit Expander】This swages tool present a perfect depth and a tight fitting, which will make the brazing easier, reducing the fatigue stress....
Check Stock

Ice Maker Water Valve 241803701 242252603 240519601 for New Frigidaire Refrigerator

  • Actual #’s on valve: 242252603 RIV-11AE 8F-140319 Angled valve bracket is easily bendable with pliers.
  • Refrigerator Water Inlet Valve This valve will fit most brands such as Frigidaire, White Westinghouse, Tappan, Gibson, Kelvinator, Sears, & Kenmore.
  • It is a single solenoid valve with a 1/4″ inlet & outlet which is standard. This valve has the new “John Guest” style fitting which allows you to just push the waterline directly into the valve from the ice maker. It’s that easy and no leaks! The other end will have the standard 1/4″ compression fitting that your supply line will hook to..
  • This valve will work with most all refrigerators that have the freezer on top or bottom. It will NOT work with a refrigerator that has a water filter built into the refrigerator from the factory..
  • What’s Included? (1) Valve, (1) 1/4″ Waterline, (2) Mounting Screws & More!.
Check Stock

Outdoor Water Solutions ARS0026 7-Inch Airstone Diffuser

  • This is a 7" diffuser airstone with a 1/2" male npt fitting that fits our airstone foot valve which is also called an inline backflow valve.
  • Note: shallow or larger ponds may require multiple airstone diffuser kits..
  • Note: this air stone require an airstone foot valve to prevent water from backing up into the airline..
Check Stock