Best Copper Heat Pipe

8 Pcs Swaging Tool Drill Bit Set HVAC Repairing Set Air Conditioner Manual Copper Pipe Swage Tube Tool with Copper Pipe Cutter and Deburring Tool for Copper Aluminum and Thin Stainless Steel Tube

  • 【What You Will Get】: This air conditioning copper pipe flaring tool set contains 8 tools: 6 Pcs different size drill bits, 1 Pc mini copper pipe cutter, 1 Pc deburring tool, complete set of tools, very suitable for air conditioning copper pipe flaring operation during HVAC installation, no complicated learning, easy to use..
  • 【Drill size】: 6 different sizes of drill bits, including 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Handle diameter: 7 mm (hexagonal handle), pipe reaming tool is a necessary accessory for repairing air conditioners..
  • 【Mini copper pipe cutter】: 3-28mm (1/8" - 1 1/8") copper pipe cutter can cut copper pipe, steel pipe, stainless steel pipe, aluminum pipe PVC and iron. Note: Cutting PVC pipe is not recommended because it is much more difficult to cut..
  • 【Deburring Tool】: The blade is mounted on the handle can rotate 360 degrees, this tool helps to clean the top of the pipe or tube, it has a compact size and can easily be carried anywhere..
  • 【Why Do You Need HVAC Tools Drill Bit Set】: When connecting copper pipes of air conditioners, the soft copper pipes are expanded by the rotation of the drill bit, so that the two copper pipes are connected without leakage. When used in combination with electric drill and impact....
Check Stock

WELWIK 4PCS Chrome Plated Stainless Steel Tapered Flange Cover Deep Bath Flange Made to Match Bell Flange, 1/2 in

  • The keyhole flange cover is made of stainless steel, which is heat-resistant and resistant to a variety of chemicals..
  • When the pipe passes through the wall, it will leave an ugly surface.
  • Conical pipe cover can be decorated with pipe cover or cover the gap to keep the appearance clean..
  • The size of flange cover is about 17 x 32 x 56 mm / 0.66 x 1.25x 2.2 inches, which is suitable for 1 / 2 inch CTS nominal copper pipe (5 / 8 inch outer diameter).
  • The hole cover flange cover is compatible with all 1 / 2'' nominal water pipes, such as copper, PEX and CPVC..
  • Can be used in various residential and commercial applications, and can be installed with kitchen faucet, sink, toilet, dishwasher, refrigerator and other water supply devices..
Check Stock

EZARC Pipe Cutter - Tubing Cutter Set with Mini Tube Cutter, Copper Pipe Cutter Tool 3/16\ to 2\ Outer Diameter for Cutting Aluminum PVC Thin Stainless Steel Tube

  • ...s with an outer diameter of 3/16 to 2 inches and a thickness of 1/10 inch. The mini tubing cutter is designed to cut through 1/8 to 7/8-inch pipes, with a maximum thickness of 1/10-inch. It is particularly useful in tight spaces where a full turn is not possible..
  • ✅【Exquisite Craftsmanship】This heavy-duty copper tubing cutters are made with heat-treated SKD-grade material cutting wheels and high-grade steel construction. This exquisite craftsmanship ensures they can effectively cut pipes made of aluminum, copper, PVC, as well as thin stainless steel tubes..
  • ✅【Clean & Precise Cut】EZARC professional copper pipe cutter set comes equipped with 6 individual bearings that allow for increased cutting speed. Precise rolling control ensures that each cut is smoother and more accurate, resulting in a cleaner and more precise cut during pipe cutting..
  • ✅【Various Cutting Materials】Our copper pipe cutter is versatile and can cut pipes with an outer diameter ranging from 1/8" to 2". It's perfect for cutting heavy-duty hard materials such as thin stainless steel, as well as all soft tubes like aluminum, copper, and PVC..
  • ✅【Cutting Efficiency】Our copper cutter features a solid ergonomic PVC knob located at the bottom, providing stability whil....
Check Stock

Sewer Skewer Vent Defroster for Sewer Pipes & Roof Vents, Prevents Freezing & Clogging, Copper Tee, Made in USA

  • PREVENTS SEWER PIPES FROM CLOGGING -The original Sewer Skewer prevents sewer vent pipes from freezing and stops methane sewer gas backup.
  • MELTS SNOW & ICE - Made of copper which conducts heat from the sun and sewer gas to the top of sewer vent to melt ice and snow.
  • FITS ANY SIZE PIPE – No measuring required, simply drop it in the sewer vent pipe and it begins to work and is rated for -15 degrees below zero.
  • WORKS FOR FURNACE VENT PIPES – Copper skewer will not melt and can be used in furnace vent pipes to prevent ice and snow clogging pipe.
  • ASSEMBLED IN USA BY ADULTS WITH DISABILITYS WITH PORTIONS SUPPORTING DISABLED VETERANS.
Check Stock

ADHES Foil Tape Aluminum Tape Heat Resistant Tape Metal Duct Tape 100mm x 50m

  • 1,[ High Temperature Resistant ] ADHES Foil Tape Withstands extreme temperature from -20°C to 180°C. Resists flame, thermally conductive, smoke transmission and some areas requiring thermal insulation..
  • 2,[ Excellent Waterproof ] ADHES Aluminum Tape can be used for repairing, sealing, Fixed wire and cable, hose, pipe etc. It also provides waterproof protection. Excellent moisture and weather resistant..
  • 3,[Chemical&Heat Resistant ] ADHES heat resistant tape has strong anti-corrosion properties and rusty resistant. Suitable for professional pipe sealing, and kitchen exhaust pipe sealing..
  • 4,[Widely Used Insulation Tape] ADHES tape Ideal for multiple uses, including repairing, sealing hot and cold air ducts, kitchen moisture prevent, duct insulation systems, stainless and plastic seams, temporary repair of metal surfaces, copper pipe fixing, etc.
  • 5,[Trusted Brand] ADHES has been manufacturing tape for 18 years since 2002. It never stop investing in improving products and hope to contribution to this world with more safety and quality products..
Check Stock

EconoHome Heat Cable for Pipe Freeze Protection - Heating Tape with Built-in High-Temperature Thermostat - Constant Watt Anti-Freeze & UV-Proof Heated Cord - 120 VAC - Copper Nickel Wire Heater

  • EconoHome Heat Cable for Pipe Freeze Protection - Heating Tape with Built-In High-Temperature Thermostat - Constant Watt Anti-Freeze & UV-Proof Heated Cord with Temperature Limiter - 120 VAC - Copper Nickel Wire Heater.
  • UV-Protected Heat Tape for Pipes - Each heavy-duty pipe heat tape are made to withstand UV rays. You need not worry about sun exposure interfering with the heat cord's high-performance output..
  • Built Tough for Ice Protection - Designed to withstand external stressors, and impacts, this anti-freeze heated tape is covered in a Polyolefin outer sheath and cross-linkable polymer insulation..
  • Ultra-Smart Heat Tracing Engineering - A built-in light indicator lets you know that the water pipe heater is working. Its built-in thermostat cuts in at 003c3°C and cuts off automatically at 15°C..
  • Silent & Unobtrusive - These pipe wrap insulation cables stay quiet and tucked away all winter. The clean black exterior won't look out of place against your pipes or cause any undue distractions..
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confid....
Check Stock

Arc Lighting 22071 Xtreme Series H7 LED Bulb Kit (2 EA)

  • Powerful 10,000 lumens light output produces stunning illumination that beats the 35W HID system.
  • Precision optics designed for long range visibility with zero glare.
  • Patented VacPipeTM utilizes a micro copper vacuum heat pipe to extract heat 3 times more efficiently than a conventional heat sink cooling system.
Check Stock

Arc Lighting 22011 Xtreme Series H1 LED Bulb Kit (2 EA)

  • Powerful 10,000 lumens light output produces stunning illumination that beats the 35W HID system.
  • Precision optics designed for long range visibility with zero glare.
  • Patented VacPipeTM utilizes a micro copper vacuum heat pipe to extract heat 3 times more efficiently than a conventional heat sink cooling system.
Check Stock

Arc Lighting 22131 Xtreme Series H13 LED Bulb Kit (2 EA)

  • Powerful 10,000 lumens light output produces stunning illumination that beats the 35W HID system.
  • Precision optics designed for long range visibility with zero glare.
  • Patented VacPipeTM utilizes a micro copper vacuum heat pipe to extract heat 3 times more efficiently than a conventional heat sink cooling system.
Check Stock

Air Pneumatic Nipper Power Metal Wire Shear,Cutting Wire Dia 0.1-1.5mm,Crimping Pliers Metal Shear Cutter Scissor Cutting Wire Air Shear Cutter Tool

  • Powerful, handheld metal cutting shear cuts through 0.1mm-1.5mm.
  • Allows working pressure at 0.3-0.6 MP,Size:31*150mm.
  • Powerful, Pneumatic Metal Cutting Shear Copper (0.8mm) and Iron (0.5mm) and fast free speed of 3500 RPM.
  • Suitable for all kinds of copper, iron, plastic, leather, straw mat, refrigerant pipe, use electric heat pipe, glass fiber and other places..
  • Light weight and high base, single hand operation,New version, high strength, wear resistant, long service life.
Check Stock