Categories

Best Copper Lug

10pcs 2/0 Gauge 2/0 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

WindyNation 6 Gauge AWG (20 Feet Black + 20 Feet Red) Power Inverter Battery Cable Wire Kit for DC to AC Inverters RV, Car, Solar, Marine, Off-Grid

  • Includes 1pc black + 1pc red pure copper inverter cables (select cable gauge and length), 8 feet of 10 Gauge black grounding cable with cable lug connectors, 4pcs of 5/16" cable lug connectors + 4pcs of 3/8" cable lug connectors with heat shrink tubing..
  • Extra battery cable lugs are included so you can attach the appropriate stud size for your battery and inverter mounting terminals. 4pcs of 5/16" cable lugs and 4pcs of 3/8" cable lugs allow for all possible combinations (nearly all inverters and batteries use 5/16" and/or 3/8" mounting terminals). Simply attach the appropriate cable lug stud size to the cable that fits your inverter and battery mounting terminals..
  • Inverter cables are WindyNation Power-Flex Battery Cable (pure copper) with SAE J1127 approval. Power-Flex cable is a pure copper conductor and very flexible..
  • Refer to Image 2 in the photo gallery for a chart that will help you select the correct inverter cable gauge and length depending on the amperage of your inverter..
  • Cable lugs are pure copper with a corrosion resistant tin coating. Heat shrink is black with and certified for up to 105 C and 600V..
Check Stock

OhLectric OL-43473 Lay-in Connector - Made with High Conductivity Copper Alloy - Copper Conductor Lay-in Connector - Ideal for Grounding Swimming Pool and Conduits - 4-14 Wire Range, Pack of 1

  • TOP QUALITY MATERIAL: Our copper lay in lug is constructed with high strength and high conductive copper alloy that makes it durable and more reliable for use. These connectors are strong enough to withstand various climates and temperatures, evidently prove these lay in lugs are highly corrosion resistant..
  • INGENUOUS DESIGN: Engineered deliberately with an open-faced design for easy to use purpose which allows the user to insert the copper conductor as a jumper to multiple conduits without breaking the grounding conductor. This copper lug is designed with a threaded hole which makes it easier to attach to concrete surfaces.
  • MULTIPURPOSE CONNECTOR: Since these direct burial lugs are highly durable they are most preferred to be used to ground swimming pools, spa equipment, copper conduits, etc.
  • the stainless steel screw comes with the grounding connector perfectly holds the conduits tight for a long period..
  • GUARANTEED SAFETY: These lay in connectors together with the stainless steel screw underwent several safety tests and both cULus and UL listed for grounding and bonding applications. Specifically designed for the safety grounding of wire range 14-4 AW, these UL467-Listed lugs are great for direct burial and bonding applications.
Check Stock

10 pcs WNI 4 Gauge x 5/16 Pure Copper Battery Welding Cable Lug Connector Ring Terminals

  • Heavy duty cable lug designed to fit solid or stranded wire.
  • Wire can be crimped or soldered to copper lug.
  • Closed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connection.
  • Meets standard 486 for WIRE CONNECTORS AND SOLDERING LUGS.
  • Manufactured from pure annealed ASTM-B-152 copper with excellent conductivity characteristics.
Check Stock

10 pcs WNI 2/0 Gauge x 3/8 Pure Copper Battery Welding Cable Lug Connector Ring Terminals

  • Heavy duty cable lug designed to fit solid or stranded wire.
  • Wire can be crimped or soldered to copper lug.
  • Closed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connection.
  • Meets standard 486 for WIRE CONNECTORS AND SOLDERING LUGS.
  • Manufactured from pure annealed ASTM-B-152 copper with excellent conductivity characteristics.
Check Stock

36-inch 3/8” Battery Replacement Cable, 10mm Copper Lug Ends, Super Heavy-Duty 2 AWG 100% Copper, Automobile, Marine, Boat, Solar, Tractor, Mower, Golf Cart, Motorcycle, Heavy Equipment, by Tech Team

  • When it comes to battery cables the LOWER the AWG number the HIGHER the current carrying capacity. Tech Team’s #2 AWG cables carry far more current than other #4 AWG, #5 AWG, or #6 cables. This means less heat buildup and less voltage / amperage drop which prolongs the life of starters, inverters, motors, and other connected electrically powered devices..
  • Tech Team’s cables feature 10mm – 3/8” diameter tinned double crimped 100% copper lug terminal ends with a protective heat shrink polyolefin sleeves to prevent moisture incursion and eliminate corrosion. There is no need to buy battery cables with 5/16” diameter lug ends because the 3/8” (6/16”) will fit both size terminal studs..
  • Tech Team’s battery cables are the best you will find anyplace and are the best possible option for Marine, Boat, Solar, Inverter, Motorcycle, Automobile, Tractor, Bulldozer, Excavator, Riding Mower, Golf Carts, and many other applications. We price our #2 AWG cables to be competitive with thinner, lower capacity #4 AWG, #6 AWG, and #8 AWG cables..
  • Includes one (1) red 36 inch #2 AWG 100% copper stranded wire battery cable with 100% copper 3/8” diameter tinned lug terminal ends with hear shrink protective sleeves..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...nt. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 (nominal cable area 35-50mm²)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

170 Pieces Copper Battery Cable Ends 12 Sizes Battery Wire Lugs Eyelets Tubular Ring Terminal Connectors SC Terminals for Automotive Supplies AWG4, AWG6, AWG8, AWG10, AWG12 (Metal Color)

  • Package includes: you will get 170 pieces copper ring lugs terminals in 12 AWG, 20 pieces for SC4-6, 20 pieces for SC4-4, 20 pieces for SC6-8, 20 pieces for SC6-6, 20 pieces for SC10-6, 20 pieces for SC10-8, 5 pieces for SC16-10, 10 pieces for SC16-8, 10 pieces for SC16-6, 5 pieces for SC25-10, 10 pieces SC25-8 and 10 pieces for SC25-6.
  • Quality material: these lug battery terminals are made of quality copper, which are durable and strong, have nice electrical conductivity, heat resistance and corrosion resistance, will serve you for a long time.
  • Nice performance: the closed design of these copper terminal connectors seal out the moisture, and the temperature durability prevent deforming, ensure the safety of use.
  • The common sizes of the copper connectors are convenient for use, which improve your work efficiency.
  • Convenient for organizing: each bare copper lug is engraved with its wire gauge identification, easy for you to quick reorganize.
  • You can throw these kit in your toolbox and not have to worry about sizes getting mixed together.
  • Multiple use: these copper battery terminal ends are suitable for solar panels, distribution box, marine, vehicle, motorcycle, boat, trolling motors wiring, and other household appliances, such as power distribution cabin....
Check Stock

X AUTOHAUX 2 Pcs Chrome 7 Spline Black Wheel Lug Nut Drive Tuner Key Tool Lock 16.5mm

  • [Wheel Lug Nut Key] Inner hole diameter is 16.5mm / 0.65" that can fit the 19mm / 0.75" and 21mm / 0.83" lug nut. Please take the key in the right hex..
  • [ ] Manufactured from through-hardened steel that can withstand much more force than the torque needed to secure the nuts on your vehicle..
  • [Note] Please tighten the lug nuts manually, DO NOT use electrical tools. Please check the size of nuts on your wheels before placing order..
  • [ Perfect Performance] It is finished by chrome plating. Plating with essential layers of copper nickel and chrome to provide exceptional strength beauty and corrosion resistance..
Check Stock

M14x1.5 Wheel Lug Nuts 32 Pack Chrome Lug Nuts 2 inches Tall Spline Drive Cone Seat with Socket Compatible with Ford F250 F350 Super Duty Chevy Silverado 1500 2500HD and GMC Sierra

  • M14x1.5 Chrome Nuts ----- Extended 14mm tuner aftermarket wheel lug nuts featuring 14x1.50 thread pitch, 2" (50mm) tall & 0.91"(23mm) width, classic....
  • 32PCS Truck Lug Nuts ----- Totally 32pcs 14mm x 1.5 lug nuts, designed for super duty 8 lug 8x170 and 8x6.5 bolt pattern wheels or rims trucks,....
  • Chrome Plating Lug Nuts ----- Triple chrome plating with essential layers of copper nickel and chrome to provide exceptional strength beauty and....
  • All-in-one Nuts Set ----- Includes everything you need for a fast & effective replacement of rim hub lug nuts on the after-market wheels, comes with....
  • 24 Months WARRANTY ----- We pursue outstanding quality and technical support. If you are not satisfied with this product or if you have any question,....
Check Stock

MIKKUPPA M12x1.5 Lug Nuts - 20pcs One-Piece Chrome OEM Factory Style Mag Seat Lug Nuts - Replacement for Toyota Lexus Scion Pontiac Factory Wheels

  • 【M12x1.5 Lug Nuts】M12x1.5 Thread - 13/16" (21mm) Hex - 1.46" (37mm) Hight - 1.2" (30mm) Wide - Mag Seat - Closed end Lug Nuts - Color: Silver / Chrome. (NOTE: Please tighten the lug nuts manually, DO NOT use electrical tools)..
  • 【Applicable Models】Replacement for Toyota 4Runner 1984-2019, Toyota Camry 1983-2019, Toyota Tacoma 1995-2019, Toyota Tundra 2000-2017, Toyota Sequoia 2001-2017, Honda Civic 1973-2019 etc..
  • 【Superb Craftsmanship】This product uses triple chromium plating and basic nickel copper and chromium plating to provide excellent strength and corrosion resistance. Made of cold forged and heat-treated steel, it has reliable strength and durability..
  • 【Package Included】The product contains 20 high quality mag lug nuts,These lug nuts are manufactured with the highest quality to meet or exceed OEM Standards, perfect for replacing rusted and/or broken lug nuts..
  • 【After-sale Guarantee】If you are not satisfied with this product or if you have any question, please feel free to contact us. MIKKUPPA promise a 1-year warranty and 100% free exchange if product is defective..
Check Stock

Copper Battery Ring Terminal Connectors,UL Listed AWG Cable Wire Lugs Ends Assorted 6 Sizes Kit-40PCS,Marine Grade Wiring Eyelets

  • Made from 100% Copper for Maximum Conductivity,Heavy duty Electrical wire Lugs are great for inverters, Battery and automotive applications..
  • These closed tube copper lugs can be connected to a cable such as a battery cable by simply stripping insulation from the end of your cable, placing the lug over the exposed cable and crimping the barrel tightly and securely to the end of the cable..
  • Wire gauge identification marked on lug barrels. Widely used in household appliances, automobiles, electrical industry, mechanical equipment, power distribution cabinets, etc.
  • Seamless barrel design allows for maximum strength when crimped.
  • UL approved and tested,Closed end design seals out moisture so cables stay dry and corrosion free.
Check Stock

Sky High Oversized 1/0 Gauge AWG Big 3 Upgrade RED/Black Electrical Wiring Kit

  • (1) 3 ft pre-terminated on one end with copper lug and heat shrink power wire..
  • (2) 3 ft pre-terminated on one end with copper lugs and heat shrink ground wires..
  • (3) Extra copper closed end 3/8" diameter lugs.
  • All items ship same day priority mail and will be to your door in 1-3 days..
Check Stock