Categories

Best Copper Tubing Flare Tool Adapter

HORUSDY 7 Dies Flaring Tools Set For Sizes 3/16' -3/4' Refrigeration HVAC 45 degree Heavy Duty Eccentric Cone Type Kit for Water Gas Refrigeration Brake Line Applications,

  • The clever clutch mechanism automatically prevents over-tightening.
  • Off-set yoke reduces friction and force required, working together to produce perfect SAE 45° flares every time on copper, brass, aluminum and other soft steel tubing. Will also flare hard copper, steel, stainless steel and brass through a wall thickness of 0.035 inches。.
  • It creates a perfectly smooth flare. Will not crush the tubing. Hardened steel flaring cone, eccentrically mounted in needle bearings, produces rolling action for even metal flow, giving uniform flare walls without galling. Ideal for Water, Gas, Refrigeration, and Brake Line Applications.
  • A single clamp screw provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort.
  • Pipe sizes for the Flaring Tool are 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4".
  • Silver flaring bars are heat-treated for durability and secure grip on tubing.
Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • ... pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
  • Fixed head and angles make clean, precise flares.
  • Yoke type compressor with T-bar handle for firm grip.
  • For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
  • QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
  • Pull back the blade and revolve the pipe while compressing.
  • 2 rollers prevent skipping and jumping for most consistent tracking.
  • Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
  • BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
  • Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
  • EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instructions for use.
  • PACKAGE CONTENTS: Package includes hardened flaring bar assembly clamps with 10 SAE & metric tubing siz....
Check Stock

Capri Tools Telescopic Tube Cutter, 1/8-1-3/8 in.

  • The Telescopic Tube Cutter lets you easily make clean and precise tubing cuts on hard and soft copper, aluminum, brass, thin-walled steel, and plastic tubing in 1/8 to 1-3/8 in. outer diameter.
  • Heavy-duty ergonomic tightening knob with ultra-smooth turns gives you maximum control of cutting pressure. Precision four-roller set helps make precise cuts easy. Rollers also have flare grooves for close-to-flare cutting.
  • Fast, tool-free blade replacement: release or secure the detent wheel pin with a simple push.
  • Built-in retractable reamer deburring tool with replaceable blade.
  • Comes with a high carbon steel cutting wheel for making clean and precise cuts.
Check Stock

Wostore Double Flare Tool Adapters 7 Pcs 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 Inch Tube Expander Flaring

  • The kit includes 7 PCS flaring adapters..
  • Flaring tool adapters apply to 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" O.D.tubing..
  • Designed to use when flaring double flare in copper, aluminum, magnesium,and brass tubing as well as soft steel brake line tubing..
  • Multiple size options,meets almost all your flare needs..
Check Stock

Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit

  • MATERIAL：Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
  • UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • RUST AND CORROSION PROOFING：Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
  • MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
  • WIDELY APPLICATION：Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
Check Stock

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

  • [Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
  • [Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
  • [Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
  • [Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
  • [Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

The Stop Shop Inverted Double Flare Tool for 3/16 Inch and 1/4 Inch Tubing with Hard Plastic Case

  • This flare tool will make inverted 45 degree double flares for 3/16" AND 1/4" tubing. Not recommended for stainless steel tubing.
  • Included: Plastic hard case for storing, removable handle and block, double sided OP tool for both 3/16" & 1/4", tube stoppers for both 3/16" & 1/4" & an allen key wrench.
  • We recommend using this on regular steel and copper nickel tubing.
  • The handle is removable if you prefer to use it in a bench vise. You can also use this while the tubing is still on the car..
Check Stock

Yellow Jacket 60278 Flaring Tool

  • A Full Range 1/8 To 3/4 Inch O.D. Flaring Tool Available For Copper, Brass And Aluminum Tubing.
  • Self-Centering Yoke For Precise 45 Degree Flare Grips Without Marring Or Constricting Tube.
  • Automatic Tube Height Gauge For Correct Tubing Height.
Check Stock

Uniweld UDFT Electric/Manual R-410A Ratchet + Clutch Flaring Tool

  • Specifically designed to meet R-410A flaring specifications and all 45° flares..
  • Internal break away clutch that disengages when flare is completed, prevents over flaring and crushing the copper tubing..
  • Automatic tube stop height gauge for a perfect R-410A flare every time!.
  • 3/4" -12 point reversible ratchet wrench included reduces the amount of effort required to manually flare in a confined work space..
  • 3/8" square drive can be used with a cordless electric drill for faster flaring. Cordless drill and socket adapter not included..
  • Eccentric off center cone that spins on an axis and rolls out a perfectly uniform 45° flare with a burnished flare surface..
  • Self-Centering Clamping Dies for 8 Tube Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 inch O.D..
Check Stock

Wostore Double Flaring Tool Kit for 3/16″-5/8″ 7 Dies Automotive Line Tubing Cutter with Replacement Blade and Remear

  • 【Set Included】Flare bar x 1, flaring cone x 1, flare adapters x 7, tubing cutter x 1 and carrying case x 1..
  • 【Multifunction】Double or single automotive flaring tool set,Creates 45 degree double or single flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration. Suitable for most soft steel, aluminum, brass and copper pipes.Pipe cutter has 2 rollers secure the tube better.
  • Fold-away slide lock tube reamer deburring blade for a better connection.
  • 【Application】Double automotive flare tool kit suitable: 3/16”, 1/4”, 5/16”, 3/8″, 7/16″, 1/2″, 5/8″(5,6,8,10,12,14,16mm).
  • Tubing cutter has a 1/8 to 1-1/8 inches (3-30mm) capacity with inner outer reamer..
  • 【Durable Design】Yoke Heat-treated steel material for maximum strength and longevity that resists corrosion.Swivel constructed from chrome-plated alloy steel to reduce friction..
  • 【Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization. Instruction includes for use easily..
Check Stock

37 Degree Flaring Tool for Stainless Steel Line

  • This is the best 37 degree flaring tool for the money we have found.
  • Features a ratcheting feed screw that has a hardened flaring cone supported by needle bearings to provide the most accurate flare possible.
  • Works with tubing sizes of 3/16", 1/4", 3/8", 1/2", 5/8" and 3/4" outside diameter.
  • Compatible with steel, stainless steel, copper, brass and aluminum tubing with .035" wall thickness.
  • Creates profesional leak free flares with minimal effort.
Check Stock

Wostore Double Flaring Tool Kit for 3/16"-5/8" 7 Dies Automotive Brake Line Tube Cutter with Replacement Blade and Reamer

  • 【Multifunction】Double or single automotive flaring tool set,Creates 45 degree double or single flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration.Suitable for most soft steel,aluminum,brass and copper pipes.Pipe cutter has 2 rollers secure the tube better.
  • Fold-away slide lock tube reamer deburring blade for a better connection.
  • 【Application】Double automotive flare tool kit suitable: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8"(5,6,8,10,12,14,16mm).
  • Tubing cutter has a 1/8 to 1-1/8 inches (3-30mm) capacity with inner outer reamer..
  • 【Durable Design】Yoke Heat-treated steel material for maximum strength and longevity that resists corrosion. Swivel constructed from chrome-plated alloy steel to reduce friction..
  • 【Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization. Instruction includes for use easily..
Check Stock