Categories

Best Copper Water Pipes

Liquid-Plumr Pro-Strength Clog Remover, Full Clog Destroyer, 32 Fluid Ounces (Pack of 3)

  • One 32 ounce bottle of Liquid-Plumr Pro-Strength Full Clog Destroyer Plus PipeGuard works quickly on fully blocked, slow flowing drains and garbage disposals.
  • Easy to use Full Clog Destroyer has a triple action formula that pours through standing water to unblock full clogs, protects pipes and keeps pipes clog free at the same time while fighting odors.
  • PipeGuard technology protects pipes and keeps pipes clog free with a repellent barrier that prevents grime from sticking to pipe walls.
  • Simply pour 16 ounces down the drain, wait 15 minutes, then rinse with hot water to unclog fully blocked drains, slow flowing drains and garbage disposals.
  • Pro-Strength Full Clog Destroyer Plus PipeGuard drain cleaner is safe for all septic systems and pipes, including PVC, plastic, copper and old pipes.
Check Stock

Highcraft PXJHNG003-10 PEX Support J-Hook Hanger with Nails for 3 in. Pipe, Rope, Cable Hard Plastic (10 Pack), 3 in, White

  • PEX TUBING PIPE HANGER: Cushions and Isolates Copper, PEX, PVC, PB Tubing Running Close to Studs, Beams, Framing, etc..
  • #1 CUSHION COPPER PIPE HANGER: This Will Cushion Your Copper Pipes Securely, and Reduce Banging, Clapping, Chattering, Clicking, and Ticking From Your Old Copper Pipelines. Its Plastic Design Allows for Movement, Heating and Cooling, and Expansion and Contraction.
  • VERSATILE: Great Cushion for Piping, Cable, Marine, Construction, etc.
  • Highly Durable Hard Plastic Design for Reliable, Long-Lasting Performance.
  • THE PEX REVOLUTION: PEX Is The Preferred Choice For Water Supply And Hydronic Heating Applications, Featuring Decreased Cost, Quicker Installation, Flexibility, Durability, Freeze Resistance And Corrosion Resistance! !.
Check Stock

3-feet Cold Weather Valve and Water Pre-assembled Pipe Heating Cable with Thermostat For Pipe Freeze Protection

  • SWISS Manufactured Commercial Grade with 100% Quality Control.
  • 30 YEARS of successful experience in electric heating cables.
  • Cables automatically adjust heat output to ambient temperature.
  • Operates in temperatures down to negative 40 degrees.
  • PROTECT YOUR HOME: Our product will give you peace of mind knowing that you and your home are PROTECTED from any potential damage caused by burst pipes or the inconvenience of no running water.
  • HOW TO USE: Use for heating FRESHWATER supply pipes, SEWER pipes, DRAINAGE pipes, TANKS or SOIL heating.
  • Can be used on all METAL AND NON-METAL pipes, including copper, galvanized steel, polyethylene, polypropylene, PVC, etc.
  • The cable can be installed INSIDE the pipe if the water is not intended for consumption and is not under pressure.
  • Can be overlapped during installation and operation–CABLE WON’T OVERHEAT. 3-foot cold lead on cable..
  • Please scroll down to read the full description for more information.
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

ALDIOUS Electronic Water Descaler System for Whole House, Water Softener Scale Remover, Salt-Free Hard Water Conditioner, Limescale and Rust Removal, 3 Installation Methods, Works with All Pipes

  • ...tically, horizontally, or at any other angle by cable ties, adhesive hooks or screws(all the mounting hardware comes included). Reminding: salt free water softener needs to be installed on the water inlet pipe for maximum effect..
  • 【APPLICABLE TO ALL PIPES】The size of 2 copper coils is 39.4''×0.4‘’. The whole house descaler works all pipes, including iron, copper, plastic, stainless steel, even PVC, composite pipe, PE-X, etc. and suitable for pipes of 0.5-2 inches in diameter. Operating voltage is 110-120V..
  • 【ADVANTAGES】Pulse bands works great in this new technology since it has a larger working area for all kinds of piping works. Keep the minerals which are great for our body. No salt, No chemical involves into your water, No PH changes too compare to the Water Softener. Super cheap and maintenance free..
Check Stock

Liquid-Plumr Advanced Action Clog Destroyer Gel with PipeGuard, 32 Fluid Ounces Each, Pack of 2

  • DRAIN CLOG REMOVER: Liquid-Plumr Advanced Action Clog Destroyer Gel with PipeGuard dissolves tough clogs, prevent new ones from forming, and remove unpleasant odors.
  • DEODORIZES AND FRESHENS: Advanced Action drain opener is a drain deodorizer and cleaner and works great on bathtubs, bathroom sinks, showers, kitchen sinks and garbage disposals.
  • WORKS ON MULTIPLE CLOG TYPES: This gel clog remover tackles the toughest clogs from hair, grease, and soap scum and cuts through standing water to cleat total blockages.
  • SAFE ON ALL PIPES: Made with PipeGuard, this Liquid-Plumr drain cleaner protects pipes and is safe for septic systems, disposals and pipes, including PVC, plastic, copper and old drain pipes.
  • MAINTAIN CLEAR PIPES AND DRAINS: When used monthly, Liquid-Plumr drain clog remover with PipeGuard prevents clogs from coming back.
Check Stock

Brass Compression Fitting Ferrule [08CS] Sleeve Tube Fitting (1/2\ Tube OD)

  • Brass Sleeve Assortment Kit contains 3 sizes brass sleeve ferrules : 1/4'' 3/8'' 1/2'', 50 of each size for a total of 150. Comes in a clear plastic case.
  • High-quality material: Made of high-quality brass, corrosion resistance, high pressure resistance, temperature resistance, good sealing, and can be used for a long time..
  • Working Range: 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)..
  • Wide range of use: No need for flare tools, easy to install. Can be used on hoses, plastic pipes, copper, aluminum, 304 stainless steel pipes, and other rigid pipes.
Check Stock

HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black

  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

VEVOR Hydraulic Pipe Crimping Tool, 8T Hydraulic Copper Tube Fittings Crimper, Copper Pipe Crimper 40CR Steel, Copper Crimping Pliers with Jaws 1/2'(12.7mm), 3/4'(19.05mm), 1'(25.4mm)

  • Excellent Crimping Ø12-25 MM: It features excellent workmanship and crimping performance, more labor-saving. Great for pipe fitting, it crimps the pipes in seconds, for 1/2", 3/4", and 1" pipes..
  • Premium Material: The pipe crimping tool is constructed of 40CR steel with punching and forging process and powder-coated treatment to ensure integrated mechanical property..
  • Ergonomic Handle: Safe handling with slip-proof rubberized handle grips, anti-static. The handle can be elongated to use the lowest energy..
  • Easy to Operate: The distance between two mechanical levers is adjustable. The interchangeable jaws can be changed effortlessly..
  • Wide Application: A labor-saving tool for copper pipe connection, not for PEX pipes and other pipes. Suitable for copper fittings and copper joints, clamping copper sleeve..
Check Stock

ZUIWAN Compression Ring Removal Tool,Pipe Olive Remover Puller Tool, fit for 5/8” and 7/8” Ferrule Olive Rings,Compression Sleeve Puller,Solid Brass

  • ★High quality materials★ The pipe olive remover puller tool is made of excellent brass alloy which is characterized by high hardness and high wear resistance.Anti rust and anti-corrosion materials enable him to last long..
  • ★2 specifications★ The compression olive puller is fit for copper pipes with a diameter of both 5/8”(15mm) and 7/8”(22mm)..
  • ★Wide application★The ferrule blaster can be used for many kinds of pipes, such as kitchen, air conditioner, toilet and more..
  • ★Less time and less stress★ The olive remover can remove the old ferrule quickly and without damaging the copper pipes..
  • ★Must have★ A must have tool for plumbing with rigid copper pipes & valves..
Check Stock

EZARC Pipe Cutter - Tubing Cutter Set with Mini Tube Cutter, Copper Pipe Cutter Tool 3/16\ to 2\ Outer Diameter for Cutting Aluminum PVC Thin Stainless Steel Tube

  • ...s with an outer diameter of 3/16 to 2 inches and a thickness of 1/10 inch. The mini tubing cutter is designed to cut through 1/8 to 7/8-inch pipes, with a maximum thickness of 1/10-inch. It is particularly useful in tight spaces where a full turn is not possible..
  • ✅【Exquisite Craftsmanship】This heavy-duty copper tubing cutters are made with heat-treated SKD-grade material cutting wheels and high-grade steel construction. This exquisite craftsmanship ensures they can effectively cut pipes made of aluminum, copper, PVC, as well as thin stainless steel tubes..
  • ✅【Clean & Precise Cut】EZARC professional copper pipe cutter set comes equipped with 6 individual bearings that allow for increased cutting speed. Precise rolling control ensures that each cut is smoother and more accurate, resulting in a cleaner and more precise cut during pipe cutting..
  • ✅【Various Cutting Materials】Our copper pipe cutter is versatile and can cut pipes with an outer diameter ranging from 1/8" to 2". It's perfect for cutting heavy-duty hard materials such as thin stainless steel, as well as all soft tubes like aluminum, copper, and PVC..
  • ✅【Cutting Efficiency】Our copper cutter features a solid ergonomic PVC knob located at the bottom, providing stability whil....
Check Stock

Pipe Reamer Tool [Plumbers Efficient Helper] Deburring Tool 1/4 to 5/8 Inner/Outer for Copper PVC Pipe Cleaner Stainless Steel Tubing and Pipe Reamer

  • 【Efficient Deburring】Plumber is here! This pipe reamer tool makes smooth work of cleaning up the ends of copper and plastic pipe for better....
  • 【Excellent Grip】This pipe deburring tool has a metal casing that does not deform easily during operation like plastic, which enhances safety, and....
  • 【Deburring Tool for Copper Pipe】There are 4 solid stainless steel reamers inner and outter, enough to deal with PVC pipes and copper pipes, and....
  • 【Small Diameter Friendly】This pvc pipe reamer tool adapts to pipes in the OD and ID range of 1/4" to 5/8", so you can apply it to narrow pipes..
  • 【Portable Debur Tool】2" diameter & 2.36" height, it won't take up too much space in the toolbox, easy to carry. With a good painting process, the....
Check Stock

E-outstanding Compression Ferrule Sleeve 50PCS 4mm Brass Double Taper Ferrule Pipe Tube Fittings

  • Brass Sleeve Assortment Kit contains 3 sizes brass sleeve ferrules : 1/4'' 3/8'' 1/2'', 50 of each size for a total of 150. Comes in a clear plastic case.
  • High-quality material: Made of high-quality brass, corrosion resistance, high pressure resistance, temperature resistance, good sealing, and can be used for a long time..
  • Working Range: 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)..
  • Wide range of use: No need for flare tools, easy to install. Can be used on hoses, plastic pipes, copper, aluminum, 304 stainless steel pipes, and other rigid pipes.
Check Stock