Categories

Best Copying Gas Cutting Machine

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

WeldingCity Propane/Natural Gas Cutting Tip GPN #2 GPN-2 Size 2 for Victor Oxyfuel Torch 1-pk

  • Premium quality brand-new propane/natural gas two-piece general purpose cutting tip GPN series for Victor hand and machine torch. Pack of 1 cutting....
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5 and 6..
  • Medium preheat for hand/machine cutting use with propane/natural gas..
  • Fits Victor cutting attachment series: CA2460/CA1060/ST/SST/1400C and other aftermarket cutting heads compatible with Victor apparatus..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity Propane/Natural Gas/LP Two Piece General Purpose Cutting Tip 3-GPN Size 0 for Victor Torch | Pack of 1

  • Premium quality brand-new propane/natural gas two-piece general purpose cutting tip 3-GPN series for Victor hand and machine torch. Pack of 1 cutting....
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4 and 5..
  • Medium preheat for hand/machine cutting use with propane/natural gas..
  • Fits Victor cutting attachment series: CA1260/CA1350/CA2060/C1450 and other aftermarket cutting heads compatible with Victor apparatus..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity Propane/Natural Gas/LP Two Piece General Purpose Cutting Tip GPN-3 Size 3 for Victor Torch | Pack of 1

  • Premium quality brand-new propane/natural gas two-piece general purpose cutting tip GPN series for Victor hand and machine torch. Pack of 1 cutting....
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5 and 6..
  • Medium preheat for hand/machine cutting use with propane/natural gas..
  • Fits Victor cutting attachment series: CA2460/CA1060/ST/SST/1400C and other aftermarket cutting heads compatible with Victor apparatus..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

OSCARBIDE Indexable Boring Bar 3/4 x 10 Overall Length,Right-Hand Sclcr Boring Bar S12S-SCLCR3 with CCMT09T304 CCMT32.5 ,1 Piece

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

WeldingCity Pack of 2 Propane/Natural Gas General Purpose Cutting Tip 3-GPN Size 2 for Victor Gas Torch

  • Pack of 2 premium quality brand-new propane/natural gas two-piece general purpose cutting tip 3-GPN series for Victor hand and machine torch..
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4 and 5..
  • Medium preheat for hand/machine cutting use with propane/natural gas..
  • Fits Victor cutting attachment series: CA1260/CA1350/CA2060/C1450 and other aftermarket cutting heads compatible with Victor apparatus..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity Pack of 2 Propane/Natural Gas General Purpose Cutting Tip 3-GPN Size 1 for Victor Gas Torch

  • Pack of 2 premium quality brand-new propane/natural gas two-piece general purpose cutting tip 3-GPN series for Victor hand and machine torch..
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4 and 5..
  • Medium preheat for hand/machine cutting use with propane/natural gas..
  • Fits Victor cutting attachment series: CA1260/CA1350/CA2060/C1450 and other aftermarket cutting heads compatible with Victor apparatus..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Dante Products Burner Pipe Silver

  • BLUEROCK CG-211C PIPE GAS CUTTING MACHINE.
  • Complete Motorized Magnetic Torch Pipe Cutting Kit Includes:.
  • CG-211C Motorized Machine with power control box and cords.
  • Complete Torch Head Assembly with standard B-fittings & valves.
  • Torch Holder Assembly with adjustable straight or beveling angle mount and bars Cutting Tips Qty 3 Acetylene G02 (Assorted Sizes. Similar to Airco....
Check Stock

ALUMINUM WELDING: A COMPLETE GUIDE TO ALUMINUM WELDING

  • 1.【Body Material】This torch track gas cutting machine is made of high-strength aluminum ingot material, precision die-casting, reasonable structural design and good walking stability. It features light and compact in structure, as ideal portable machine..
  • 2.【Application】This machine is suitable for factories such as shipbuilding, machinery, steel structure, construction and other industries. Also suitable for other large, medium and small enterprises to cut steel..
  • 3.【Tech Parameters】Cutting Speed: 6"-31.4" (150-800 mm) /min.
  • Cutting Thickness: 0.23"-4" (6-100 mm) (by standard accessories). Grove range: I.Y.V(45°). Tracks: about 6'(1.8m)..
  • 4.【Advanced Design】The speed control series adopts mechanical speed regulation, which greatly reduces the influence of high temperature and humidity during cutting. And it adopts imported AC motor and has its own cooling fan, which has the characteristics of continuous operation under high heat conditions..
  • 5.【Detailed Instructions】This machine comes wi....
Check Stock

ZENY DC Inverter Plasma Cutter 50AMP CUT-50 Dual Voltage 110-220V Cutting Machine

  • 【High Efficiency & Energy Saving】-- ZENY cutter machine by using inverter technical of switch power, stable and matureit greatly reduces the dimensions and weight of main transformer, energy saving 50%, as well as the efficiency is increased by 30%. Improved cooling method for the cutting torch.
  • greatly makes the cutting consumables more endurable..
  • 【 110V or 220V Dual Voltage】-- The ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ. The plasma cutter has the function to supply gas ahead and turn off gas delayed..
  • 【Compact Design & Widely Applications】-- This ZENY compact plasma cutter has a handle for portability. Easy taking.The net weight is 22.5LB. It is perfect for perfect for home DIY and general repairing work. Ideal for both home garages and workshops..
  • 【Specification for Cutter Machine】-- Voltage: 110/220V, 60HZ, 4.8KVA.
Check Stock

Pneumatic Wood Stone Concrete Cutter Cutting Machine 230MM 8000RPM

  • Gas consumption per unit power: 37L/S·kw.
Check Stock