Categories

Best Cord Assembly Cable

Sleek Socket 1-Gang Wall Plate, for Coaxial Only with F-to-F 90 Degree Connector and Adhesvie Cable Management Kit

  • HIDES UGLY, UNSAFE and BULKY EXTERNAL DATA CONNECTIONS typically found in standard coaxial data cable outlets.
  • INCLUDES ADHESIVE CABLE MANAGEMENT KIT to neatly adhere cord flush against the wall, parallel to the wall plate so that now no more obstructions with furniture, no more damage to coaxial connector or coaxial cable that can damage or degrade the data signal.
  • ELIMINATES THE EXPENSE OF SERVICE CALLS TO REPAIR or REPLACE CUSTOMER DAMAGED CONNECTIONS.
  • SNAP-FIT ASSEMBLY INCLUDES PATENTED SMART DESIGN to secure pass-through of data cable and adapters.
  • Includes snap-fit assembly, 1 coaxial 90 degree female-to-female adaptor, mounting screws & adhesive cable channel kit.
Check Stock

FiberCablesDirect - 5M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 5 Meter (16.40ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

  • ... Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m..
Check Stock

FiberCablesDirect - 0.5M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 0.5 Meter (1.64ft) | Length Options: 0.5M-300M | 1g 10g sfp+ 10gbase lc/lc dplx Yellow PVC ofnr lc-lc

  • ... / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) - 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
  • Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..
Check Stock

FiberCablesDirect - 12M OM1 LC LC Fiber Patch Cable | 1G Plenum Duplex 62.5/125 LC to LC Multimode Jumper 12 Meter (39.37ft) | Length Options: 0.5M-300M | Made In USA | 1/10g mmf sfp 1gbase ofnp lc-lc

  • ...ladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300 Meters at 850 nm / 600 Meters at 1310 nm. 10Gb Ethernet Distance of 33 Meters at 850 nm / 300 Meters at 1310 nm. OM1 Bandwidth is 160-200/500 MHz-km @850/1300 nm..
Check Stock

FiberCablesDirect - 1M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dplx yellow zip-cord pvc ofnr lc-lc

  • ... / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) - 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
  • Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..
Check Stock

FiberCablesDirect - 1M OM4 LC LC Fiber Patch Cable | Bend Insensitive Plenum 100G Duplex 50/125 LC to LC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 10/40/100g mmf lc-lc om4-lc-lc

  • ... Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m..
Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | Armored 100Gb LSZH Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100g qsfp+ 100gbase mmf ofnr lc-lc

  • ... Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m..
  • Fiber Network Bandwidth: 3600/500 MHz-km @850/1300 nm (OM4 – Optimized for 850nm VCSELs / higher speed)..
Check Stock

Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 2 position switches to turn each light Off or On Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Three 2 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of da....
Check Stock

FiberCablesDirect - 3M OM2 LC SC Fiber Patch Cable | 1Gb Duplex 50/125 LC to SC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1gb 10gb mmf upc sfp+ 1gbase mmd dplx pvc ofnr om2-lc-sc

  • ... Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM2 Ethernet Over Multimode Fiber: 500/500 MHz-km @850/1300 nm (OM2 - Laser-rated for GbE LANs) | 1Gb Ethernet Distance is 550 Meters at 850/1300 nm | 10Gb Ethernet Distance is 82 Meters at 850/1300 nm..
Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts to Build a Highly Visible, Red/Amber/Green/Blue/White LED Andon Tower Light with five 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Five 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case o....
Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This is a Kit of all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, three 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in cas....
Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green/Blue LED Andon Tower Light with four 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Four 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable....
Check Stock

FiberCablesDirect - 1M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lc-upc sfp 1gbase mmd dx pvc ofnr lc-lc

  • ...ladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300 Meters at 850 nm / 600 Meters at 1310 nm. 10Gb Ethernet Distance of 33 Meters at 850/1300 nm. OM1 Bandwidth is 160-200/500 MHz-km @850/1300 nm..
  • Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected delivery priority..
Check Stock