Categories

Best Corner Casting Fittings

SavvyCraft 4 Bow Bimini Replacement Top Canvas Cover4 Bow 96\ L 54\-60\ W Black Color

  • *Upgraded Bimini Top Parts - Casting from marine grade 316stainless steel , this external eye ends for bimini top fittings works for 7/8'' OD round tubes. Upgraded outside eye ends that stands up over time is a perfect choice to replace your plastic, nylon or broken fittings..
  • *Heavy Duty Stainless Steel - Stainless eye ends are well-built and highly polished for ultimate using. They are corrosion resistant, anti-rust, providing more durable solution for salty water environment..
  • *Easy to Install - Marine boat fittings are easy to assemble and install.Simply assemble jaw slide with eye ends to join the bimini top frame, then tighten screws to secure the inserted poles in place..
  • *Durable Design - 7/8’’ external eye end has shining polished looking and smooth touch, combining the modern design . Bringing this marine hardware for your lovely bimini will definitely surprise you for its outstanding product experience..
  • *Choose Right Size - Fits for 7/8'' OD round tube. One screw on each fitting measured 1/4''. the detail size refer to the left picture.Perfect replacement for marine hardware, widely used for boating, kayak, canoe, yacht,etc..
Check Stock

PVC- 4 way L/T 2' (Furniture Grade White)

  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • All four outlets are non-threaded sockets.
  • 2" Fittings fit on 2" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

1-1/2" 4-way Tee PVC Fitting Connector

  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • All four outlets are non-threaded sockets.
Check Stock

1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)

  • HEAVY DUTY PVC FITTINGS: These 1CAMO 3-way elbow PVC fittings are made of durable furniture grade PVC, schedule 40. Furniture-grade means they can withstand heavier weights and have higher manufacturing requirements than ordinary plumbing fittings..
  • PROFESSIONAL PERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
  • EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
  • PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
  • WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, e....
Check Stock

IWS-1632AF Copper Tubing Press Tool for 1/2 3/4 1 Viega ProPress Copper Fittings

  • Good for Viega ProPress, Elkhart, Conex copper fittings..
  • C/W 1/2", 3/4", and 1" interchangeable jaws.NOT FOR CORNER OPERATION..
  • 360 degree rotatable head for easy access..
  • A labor saving tool for copper pipe connection, not for PEX pipes..
  • Forging craft promises jaws to give pipe fittings an accurate press without scratches.
Check Stock

TL TOOLEGIN Push to Connect Fittings 3/8" Tube OD x 1/4" NPT Male Air Line Fittings Air Hose Fittings Pneumatic Fittings DOT Air Fittings Air Compressor Quick Connect Fittings Brake Line Fittings 5pcs

  • This 3/8" push to connect elbow fitting is designed for use in pneumatic systems, operates with a working pressure of vacuum to 250psi and temperature range of -40℉ to +200℉..
  • Constructed with high-quality CA360 brass casting for long-lasting performance. Resistant to corrosion and rust, ensuring a leak-free connection for a long time..
  • TL TOOLEGIN air line fittings meet rigorous safety standards with D.O.T FMVSS 571.106 certification, ideal for those seeking a durable and reliable solution for their pneumatic system needs..
  • Easy to install, simply push the tubing into the air hose fitting to create a secure, leak-free connection. No tools, soldering, or crimping required. The fittings elbow has a compact design, allowing for flexible installation in tight spaces..
  • Widely Used, these air brake fittings are suitable for a variety of fluid and air transfer applications, such as air compressors, pneumatic control systems, and vacuum systems..
Check Stock

Minimprover 4PCS 1/4 ID Hose Barb Thru-Bulk Head Hex Union Brass Straight Fitting with Flat Washer Gasket Water/Fuel/Air

  • ★ 【Material】: Solid Brass construction. Durable Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ 【SIZE】: 1/4" Hose Barb x 1/4" Hose Barb.Thru-Bulk Bulkhead Fittings is connect with 1/4" ID hose with the same size..
  • ★ 【Introduction】: Smooth surface and inner wall, durable Light and Small. Exquisite craftsman makes it safe and reliable.Bulkhead union coupling for connecting two hoses with the same diameter in a straight run.Barbed fitting for a tight seal on hoses..
  • ★ 【Applications】: The fittings are fixed with 2 Gaskets and 1 fixed six corner, 1 movable six corner nuts form bulkhead tank function.Wide range of use: suitable for applications in water,fuel,air and etc..
  • ★ 【Package Include】: 4 Pack 1/4" to 1/4" hose barb.It comes with 1 year warranty..
Check Stock

12Pack 3-Way PVC Fittings,1' Elbow Fittings for Build Heavy Duty PVC Furniture, Grade SCH40 3-Way PVC Elbow Side Outlet Tees, 90 Degree PVC Corner Elbow Fitting for Greenhouse Frame Tent Connections

  • HEAVY DUTY 3 WAY PVC FITTINGS——The Elbow PVC fittings are made of Furniture Grade PVC with a high-gloss finish for years of use without yellowing, cracking or breaking, perfect PVC Furniture Connectors for building sturdy cornet joint, such as dog beds/hammock and garden project.
  • 1INCH FURNITURE PVC FITTINGS ——Package include 12pcs 1” PVC FITTINGS, fits externally 1” size PVC pipe, which has actual OD 1-5/16” or 1.315” and an inside diameter of 1”(Sch.40 or Sch.80 PVC pipe).
  • PROFESSIONAL PERFORMANCE 3-WAY TEE——The 3way Elbow fittings is manufactured with a sleek looks without any barcodes, embossments or manufacturer markings on their outer surface, suitable for indoor and outdoor use.
  • IMPACT PROOF SOLID PVC CONNECTOR——The 3-Way side-out elbows are ideal for edge, corner and center connections.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • WIDE APPLICATIONS——The furniture grade 3-way PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as PVC greenhouse, tent connections, cat enclosure, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

VECELO Corner Shelf, 63 Inch Tall Storage Cabinet, 5-Tier Bookshelf Display Shelves Rack for Living Room, Kitchen, Balcony, Small Space, Rustic Brown

  • 【Rustic Corner Shelf】The brown wood and black metal frames make this corner shelf a vintage chic, which can easily fit into any corner of your room for storing books, knickknacks, photo frames, plants, or other daily items..
  • 【5 Tier Corner Shelf for Max Storage】This triangular-shaped corner cabinet is designed with 4 tiers open storage shelves and one storage cabinet, the corner shelf stand offers ample storage and display space for your living room, bedroom, kitchen, dining room, balcony, and so on..
  • 【 Sturdy and Stable Construction】 VECELO corner shelf is made of premium engineered wood and sturdy metal frame. 3 protective adjustable feet pads ensure it stands stably on uneven surfaces. Comes with anti-toppling fittings to fix the 5 tier corner shelf to the wall..
  • 【Easy to Setup & Clean 】 Just following the detailed instruction and using the tools provided, assembly this corner shelf easily. Easy to clean with a damp cloth. Dimensions: 22.2"W X 15"D X 63.2"H..
  • 【Friendly Customer Service】30-Day Return Policy, if there is any problem with the 5 tier corner shelf, please feel free to contact us. We'll solve your problem within 24 hours..
Check Stock

HFS R Two Axis Welding Clamp Angle Clamps Aluminium Max Open 2-3/4 Width 3-1/2 Depth 1-1/3

  • [MATERIAL]: Aluminum alloy die casting clamp body.Surface spray treatment.
  • [OPERATION METHOD]: First of all, rotate the handle to fix and press the corner of the square pipe, and then weld.
  • [STRONG AND DURABLE]: Because the clamp body is made of aluminum alloy die casting, it is strong and durable, with long service life and can be....
  • [APPLICATION]: Very suitable for aligning and fixing work pieces, for welding perfect 90 degree angles on square tubes..
Check Stock

AIT Collectibles S2668 ONE Piece Roronoa Zoro YUBASHIRI Sword Brush HAMON Blade W/Fuller 41

  • Black Yubashiri sword, from Japanese anime One Piece, 104cm long, brand new, die casting, pointed, sharpened.
  • Carbon steel blade, shiny white hand brush hamon edge with a deep fuller on each side, wavy habuchi pattern featuring differential tempering....
  • Black leather braided handle with brass Yubashiri guard and pommel cap.
  • Shiny black paint scabbard with brass fittings.
  • Please specify if you need one of other five blade types..
Check Stock

8Pack 4-Way PVC Fittings, 1' Furniture Grade Elbow Fitting for Building Heavy Duty PVC Furniture, SCH 40 4-Way Side Outlet Tees, PVC Conner Fittings for Greenhouse Shed Pipe Fittings Tent Connection

  • FURNITURE 4-WAY PVC FITTINGS——The PVC elbow fittings are made from Furniture Grade PVC with a high-gloss finish for years of use without yellowing, cracking or breaking, perfect for building heavy duty PVC furniture, such as dog beds/hammock and garden project.
  • FIT FOR 1-INCH SCH 40 PVC PIPE——Package includes 8 x 1” PVC FITTINGS, fits Sch.40 1” PVC Pipe, which has actual OD 1-5/16” or 1.315” and an inside diameter of 1”(Sch.40 or Sch.80 PVC pipe).
  • PROFESSIONAL PERFORMANC 4-WAY TEE——The furniture PVC connector is manufactured with a sleek looks without any barcodes, embossments or manufacturer markings on their outer surface, suitable for indoor and outdoor use.
  • IMPACK PROOF SOLID PVC FITTINGS——Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Wide Applications——4-way Corner fittings are designed for building heavy duty PVC furniture and constructing structure of PVC pipe, such as greenhouse connections, kids’ forts and tents cat enclosure, PVC cages, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

Toilet Partition Accessories Stainless Steel Toilet Bathroom Partition Hardware Accessories Bracing Foot Adjustable Bracket

  • Features: This product is made entirely of precision cast 304 and stainless steel tubes. It is durable and practical. The bracket head is made of precision casting 304. The surface is sanded and brushed, and the appearance is smooth and beautiful. The in.
  • The bracket head is made of precision casting 304. The surface is sanded and brushed, and the appearance is smooth and beautiful.
  • The inner core of the bracket head is die-casted from a flat surface without grille, and the quality is excellent, and there is no cut corner.
  • Fine workmanship, selection of high quality materials, corrosion resistance, wear resistance, not easy to damage.
  • Suitable for public toilets, toilets, etc., the installation method is simple and convenient.
Check Stock