Categories

Best Corner Clamps For 2x4

Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA

  • If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly..
  • The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart..
  • Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place..
  • Unlike other available spring clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pie....
Check Stock

NOAMOO Corner Clamps For Woodworking Set Of 4 Adjustable 60/90/120 Degree Right Angle Clamps Tools Clip Fixer Welding, Drilling, Making Cabinets, Photo Framing

  • WELL CONSTRUCTED - Our corner clamps are made of high-quality material, it is light and durable.The Compact, Strong, Heavy duty spring is made of stainless steel, smooth and durable. Protective rubber keeps from scratching your frame.It could hold the block tightly, but not too tight.Clamping force is about 10 lbs..
  • ADJUSTABLE & EASY TO USE - These corner clamps are adjustable, can fit 0.32" - 1.06" thick board and work for 90 degree corner, T-joints,L-joints and F-joints. Fit 0.24" - 0.75" thick board for 60 degree and 0.4" - 1.26" thick board for 120 degree. Also allows you to working with two different thickness board. Its compact and well-sized design fits naturally in your hand for comfortable control so that you can operate the spring clamp only by one hand..
  • MULTIFUNCTIONAL & WIDELY USED - These Corner Clamps are very suitable for welding, drilling, making cabinets, photo framing,woodworking, cabinet and furniture repair connection,wooden DIY, etc.It is extremely good for very small wood projects like photo frames, you can build bee boxes, cabinets and alot of drawers..
  • PACKAGE INCLUDED - Set of 4 Right angle clamps.They are completely multifunctional great for screwing or glueing boards or for small projects just to give you some hold. Help you ....
Check Stock

Relitec R 90 Degree Corner clamp, clamping square, Right Angle Clamp, Positioning Squares 4 Aluminum Alloy Squares (14cm/5.5\)+ 8 Clamps Woodworking Tools for Frame Cabinet fathers day gift from wife

  • 【Accurate 90 Degree Corner Clamps for Woodworking】Our corner clamp kit made of high quality aluminum alloy to ensure 90 degree accuracy. CNC machined, surface Treatment-Anodized red surface, sturdy and durable..
  • 【Easy to Use】Just need put the positioning squares on the corner of the pieces and fixed with a set of wood clamps. It is easy to use and hold the pieces together creating a perfect 90 degree angle. Like having extra hands, very simple, greatly increase your ability to make 90 degree true corners..
  • 【Fit Thicker Boards】Suitable for boards with a maximum thickness of 2.2 inch / 5.6 cm. Apply to assembly more woodworking projects..
  • 【Wide Application】 The woodworking clamps set is great for building pieces such as wooden boxes, kitchen cabinet, drawers, picture frames, birdhouse, mailbox, etc. It's easy to clamping the vertical pieces plumb and to glue up..
  • 【Unique Gift for DIYer or Woodworkers】 Our right angle clamps are great woodworking tools and accessories. Unique gift for Men, Women, Father/Dad, Mother/Mom, Husband, Wife, DIY Handyman, Boyfriend, Girlfriend, or Him/Her who have everything..
Check Stock

SuperATV Heavy Duty Tie Rod Kit for Polaris Ranger XP 1000/1000 / Crew (See Fitment) - Stock Length Replacement

  • Compatible With/Replacement For: Polaris: 450 HO 2x4 MD 2016, Farmhand 450 2x4 Built After 8/29/16 2017, Farmhand 450 2x4 Built Before 8/29/16 2017, Forest 800 6x6 2015, Hawkeye 325 2x4 2015, Hawkeye 400 HO 2x4 2012-2014, Magnum 325 2x4 2000-2002, Magnum 330 2x4 2003-2005, Scrambler 400 2x4 2000-2002, Sport 400 1997-1999, Sportsman 325 ETX EFI 2015, Sportsman 325 ETX EFI MD 2015, Sportsman 400 4x4 2005, Sportsman 400 HO 4x4 2011-2014, Sportsman 450 2006, Sportsman 450 Built After.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement..
  • 100% New aftermarket Tie Rod Upgrade Kit built to meet OEM specifications for Polaris.
Check Stock

Modquad Case Saver Aluminum for Honda TRX 400EX

  • Cosmoska Case Saver Are CNC-machined from solid billet, offering the highest level of crash protection.
  • The design of the cover evenly distributes the force of impact, improving engine survivability and also adds a nice sporty touch to the appearance.
  • Milled from high grade, 7075 aluminum alloy and designed to protect your case should an accident happen. Protector is very light weight and of superb finish.
  • Anodized Black for corrosion resistance and an attractive appearance.
  • For 2009 Suzuki Quadracer 450 LTR450 2x4 For 2009 Suzuki Quadracer 450 LTR450Z 2x4 Limited Edition For 2008 Suzuki Quadracer 450 LTR450 2x4 For 2008 Suzuki Quadracer 450 LTR450Z 2x4 Special Edition For 2007 Suzuki Quadracer 450 LTR450 2x4 For 2006 Suzuki Quadracer 450 LTR450 2x4.
Check Stock

Woodworking Feather Board Inverted Square Power Tool Accessories Unique Chamfer Groove For Router Tables Band Saws Fences(Square Feather Board B Style Yellow), Cutting Tool

  • Right Angle Clamp: Align it, clamp it and fasten it the easy way with our Universal Fence cabinet clamps. Clamping a 90 degree joint couldn't get any easier with our Clamp-It assembly square..
  • Accurate 900: Assemble our angle clamps with any two pieces at 90 degrees, or even a cabinet one corner at a time. Never struggle with trying to get drawers square anymore..
  • Fence Clamp: This corner clamp is ideal for every stage of construction, from assembling plywood cabinets to face frames and drawers. Our fence clamp works with any joinery technique, from nails to hand cut dovetails..
  • Clamping Square: This woodworking square replaces custom clamping jigs, acts as a third hand, and eliminates the need for long clamps. Clamp-It features a 3/8'' hole in each leg to accommodate the universal fence clamp..
  • Woodworking Clamps Set: This kit includes (2) Universal clamp, and (1) Clamp-It Square. Our Universal fence clamps and Clamp-It assembly square both are easy to use..
Check Stock

All Balls 25-1434 Wheel Bearing Kit

  • Specs: Wheel Bearing Kit, Double lip type TC seals with stainless steel garter springs.
  • Chevron SRI 2 grease contains rust and oxidation inhibitors (-29°C-177°C).
  • Compatible With/Replacement For: Arctic Cat 250 2x4 1999-2005, 250 4x4 2001-2004, 300 2x4 1998-2004, 300 4x4 1998-2004, 375 2x4 w/AT 2002, 375 4x4 w/AT 2002, 400 2x4 1998-2001, 400 4x4 1998-2000, 400 4x4 w/AT 2003-2004, 400 4x4 w/MT 2001-2004, 400 FIS 2x4 w/AT 2003-2004, 400 FIS 2x4 w/MT 2003-2004, 400 FIS 4x4 w/AT 2003-2004, 400 FIS 4x4 w/MT 2002-2004, 400 TBX 4x4 2004, 454 2x4 1997-1998, 454 4x4 1996-1998, 500 4x4 1998-1999, 500 4x4 w/AT 2000-2002, 500 4x4 w/MT 2000-2001.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Wheel Bearing Kit built to meet OEM specifications.
Check Stock

90 Degree Clamps For Woodworking Positioning Squares Right Angle Clamps 2 Pack, 5.5' X 5.5' (140mm X140mm) Aluminum Alloy Cabinet Clamps Tools For Boxes, Picture Frame And Drawers

  • ... clamps are professionally used to assemble and DIY by clapping boxes, drawers, cabinets, frames. Perfect for squaring up shelf cabinets.
  • 【PROFFESSIONAL TOOLS】 The woodworking tool shows that this size set is a scientific and suitable length size choice. It can work with a clamping tool to check and position the corner for wood board jointing to gluing up or welding at a right angle.
  • 【EASY TO HANDLE】The clamps won't damage fragile cutting edges. Just place the square in the corner of the two stock pieces you need to square and secure with a set of clamps. This set of squares and clamps can make your operation more convenient. The set squares and clamps are fully adapted to various large and small DIY projects.
  • 【REFUND & WARRANTY】 If you are not satisfied, we'll give you a 100% refund within 45 days of purchase. 1-years warranty, quality problems, only change, no maintenance. Please feel free to contact us if you need.
Check Stock

Daycare Now Enrolling Vinyl Banner Sign 2x4 ft - bgb 4 Less CO

  • 2x4 ft Daycare Now Enrolling vinyl banner.
Check Stock

Corner Clamps, 90 Degree Right Angle Clamps, 4PCS Woodworking Clamp Tools with Adjustable Swing Corner, Corner Clip Fixer for Carpenter, Welding, Drilling, Making Cabinets, Photo Framing

  • ACCURATELY SET FOR EVERY RIGHT ANGLE: Whether for carpenting, wood-working, welding, photo framing or DIY use, these 90 degree corner clamps are absolutely useful tools. This compact clamps with its versatility allows to use it for framing, doweling, drilling, preparing cabinet, furniture installing, etc. In addition, right angle clip can also be used to make miter joints as well (can be use for wood 3/4 inch or less).
  • TWO ANGLES, IN ONE'S ELEMENT: Not only for 90 degree angles, but also for 45 degree saws. For boards with a thickness of different, suitable for fixing 0.2''-0.9'' board. Saves time & effort with the great angle clamps locator, strong enough but not too tight, even women can also easily use it as crafting projects and DIY with one hand ( wood not included ).
  • A GOOD LIFE IS NOT THAT EXPENSIVE: Attempting to build your own ideas in furniture! Stainless Steel Spring and adjustable jaw construction make our right clamps built to last for a smooth, effortless and accurate set every time. High durability and well-built design are conveyed to ensure long-lasting use. If you want to during a special day with someone, it’s also a great tool to do some wooden DIY projects with your lovers.
  • A SET OF 4 ANGLE CLIPS: These four corner clips will be a....
Check Stock

7 in Quick Release Workbench Vise

  • Rockler F-Style Clamp Rack: A compact solution to a sprawling problem! This wood working clamp rack from Rockler herds your F-clamps together & mounts them firmly to the wall or to the Pack-Rack (sold separately), so your clamps are where you need them, when you need them..
  • Perfect For Storage: The customary way of storing F style clamps in a jumble in the corner is certainly inexpensive, but it can be equally irritating. Trying to untangle one clamp from the rest is a chore that can result in the whole pile crashing to the floor..
  • Workshop Organization: With the Rockler F-bar clamp rack, you can say goodbye to untangling clamps! This garage tool clamp rack measures .30” wide..
  • Secure Hold: These racks are heavy-duty and hold F-clamps for woodworking securely. The clamps will not fall off even if bumped. The installation of this rack tool holder for the garage wall is pretty easy, you just require lag bolts..
  • High Quality:This woodworking clamp rack is made of sturdy, 12 gauge steel & can support a full rack of bar clamps up to 30'' wide. The footprint is very compact, saving you both wall space and floor space..
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Bora!

  • SAW-HORSE SOLUTION - made of heavy duty steel construction, The centipede is a foldable work stand that can be set up as a large portable workbench at any job site.
  • COMEPLETE KIT - The full set comes with the following accessories: 4 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag.
  • WORK HEIGHT - the working height is 30 inches tall: Large enough to lay a 4ft x 8ft wood board on top. It’s expandable by simply adding risers (not included) for an increased working height. It supports up to 6, 000 pounds of power tools and machinery.
  • VERSATILE FUNCTIONALITY - Choose from 4 sizes, CK6S, CK9S, CK12S and CK15S. The larger the base, the more weight the table can hold. The wider sizes allow you to complete 2 jobs at once.
  • INSTANT SET UP – this stand is ready to use right out of the box, no Assembly required. It takes just seconds to set up. When the job is done, it conveniently folds up for easy storage and transport.
Check Stock