Categories

Best Correct Glue

BOLASEN 10 Sheets Super Sticky Adhesive Nail Tabs, 240pcs Breathable Nail Tabs Nail Glue Stickers, Double Side Nail Adhesive Tabs with 10 Tubes of Nail Glue for Fake Nails, 2g/Tube

  • 【10 Sheets with 10pcs Glue】Including 10 sheets nail glue sticker and 10pcs nail glue. One nail jelly sticker has 12 sizes and 24 stickers, fit for each fingernail.The nail glue is 0.07oz/2g in bottle, convenient to store and carry..
  • 【Ultra thinness】Our nail adhesive tabs are ultra-thin with only 0.3mm thick, makes fake nails real and natural. Less wear and tear or allergic reaction..
  • 【Easy to Use】Bolasen Double-side Nail Glue Stickers are super easy to operate, just polish and clean the surface of the nail. Choosing the correct size, press it for about 10s, then finished. Not easy to fall off, keep sticky for 1-2 days..
  • 【Healthy & Safe】The nail tabs are made of high quality jelly glue, more Sticky than ordinary nail sticker. The nail glue are certificated with MSDS & SGS, made with natural resin, no harm to natural nails..
  • 【Wide Application】The nail glue and tabs set meet all your needs. If you are only planning on keeping your nails on for special occasions, you can use nail adhesive tabs, they will be your best choice. The acrylic nail glue is perfect for fake nails, split nails and small nail art decorations..
Check Stock

Gelike EC 6 in 1 Nail Glue Gel and Short Soft Gel Nail Tips Set for Soak Off Nail Extensions, Short Square Full Cover Acrylic Nails Tips-300Pcs

  • What You Get : Full matte short square shaped soft gel nail tips 15 Sizes-300 pieces, 6 in 1 nail glue.
  • 6 IN 1 nail glue: Combines nail glue, base gel and strengthener in one mix. It also can be used as slip solution, brush saver and blooming gel. Save your time and money..
  • 15 Size Nail Tips Fit Your Nails: This short coffin fake nail tips offers 15 different sizes with 20 nails of each size, total of 300 pcs. Each nail tip has numbered 0-11 individually, so it's easy to find the correct size tips you need..
  • NATURAL NAIL FEELING: with the high quality innovate material and super thin trailing edge, our short gel x nail tips contours to the nail perfectly from cuticle to free edge while soft enough to fit your nails great, folding without crease..
  • LONG LASTING: When you look through regular glue under a microscope has a lot of holes that cause water to get in and break it down, and glue gel solves this problem. This is why the 6 in 1 glue gel is longer lasting than regular glue..
Check Stock

Gelike EC 6 in 1 Nail Glue Gel and Short Soft Gel Nail Tips Set for Soak Off Nail Extensions Nail Art, Short Coffin Full Cover Acrylic Nails Tips-300Pcs

  • What You Get : Full matte short coffin shaped soft gel nail tips 15 Sizes-300 pieces, 6 in 1 nail glue.
  • 6 IN 1 nail glue: Combines nail glue, base gel and strengthener in one mix. It also can be used as slip solution, brush saver and blooming gel. Save your time and money..
  • 15 Size Nail Tips Fit Your Nails: This short coffin fake nail tips offers 15 different sizes with 20 nails of each size, total of 300 pcs. Each nail tip has numbered 0-11 individually, so it's easy to find the correct size tips you need..
  • NO FILE, NO BASE COAT: Upgraded double-sided fully frosted texture for incresed frictiona，which make our soft gel nail tips feature stronger adhesion, better fit on your natural nails.Pre-formed!Make nailextension easy..
  • LONG LASTING: When you look through regular glue under a microscope has a lot of holes that cause water to get in and break it down, and glue gel solves this problem. This is why the 6 in 1 glue gel is longer lasting than regular glue..
Check Stock

Gelike EC 6 in 1 Nail Glue Gel and Short Soft Gel Nail Tips Set for Soak Off Nail Extensions Nail Art, Medium Almond Full Cover Acrylic Nails Tips-300Pcs

  • What You Get : Full matte medium almond shaped soft gel nail tips 15 Sizes-300 pieces, 6 in 1 nail glue.
  • 6 IN 1 nail glue: Combines nail glue, base gel and strengthener in one mix. It also can be used as slip solution, brush saver and blooming gel. Save your time and money..
  • 15 Size Nail Tips Fit Your Nails: This short coffin fake nail tips offers 15 different sizes with 20 nails of each size, total of 300 pcs. Each nail tip has numbered 0-11 individually, so it's easy to find the correct size tips you need..
  • NATURAL NAIL FEELING: with the high quality innovate material and super thin trailing edge, our short gel x nail tips contours to the nail perfectly from cuticle to free edge while soft enough to fit your nails great, folding without crease..
  • LONG LASTING: When you look through regular glue under a microscope has a lot of holes that cause water to get in and break it down, and glue gel solves this problem. This is why the 6 in 1 glue gel is longer lasting than regular glue..
Check Stock

Broken Wings Patch Small - 5x1.75 inch

  • ...lastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on t....
Check Stock

Oakland Patch - 4x1 inch. Embroidered Iron on Patch

  • ...lastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will sco....
Check Stock

Mosaic Sticker Art Sticky DIY Handmade Art Kits for Kids - Sunflower, Butterfly, Sailboat, Woodpecker, hot air Balloon, Airplane (6 Pack)

  • 1.Sticky Mosaic Crafts Set - Included 6 patterns in total，Sunflower, Butterfly, Sailboat, Woodpecker, hot air Balloon, Airplane.
  • 2.【Enhance Colors Perception】: Kids are supposed to stick the foam stickers onto correct color area when playing. They can get to know and tell apart most common colors, making their world more colorful..
  • 3.【Develop Hand - Eye Coordination & Concentration】: Taking one and one foam stickers off the DIY kit and then stick them on to correct area to cover the corresponding spaces could improve the hand - eye coordination of them, which requires them to concentrate fully on the game.
  • 4.【Environmentally Friendly, Easy and Safe】: No glue or scissors are needed while playing this Mosaic Stickers Kit, which is made of paper and Non-Toxic foam stickers. Parents no longer need to worry if toddlers will hurt them with the scissors or will glue their fingers together..
  • 5.【Sense of Accomplishment Enhancing & Stress-Reducing】: When children get a pack done by themselves, they will feel full of sense of accomplishment. It’s a fun activity to keep them busy when staying at home. Even adults can have fun with this because seeing the blank spaces being covered one by one, you will feel really comfortable and peace in mind..
Check Stock

1789 2nd Second Amendment Homeland Security Womens Pink Embroidered Patch

  • ...lastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on t....
Check Stock

Chicago City Flag Patch - 3x2 inch. Embroidered Iron on Patch

  • ...lastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on t....
Check Stock

Game Over Marriage Patch Medium - 3x3.75 inch. Embroidered Iron on Patch

  • ...lastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on t....
Check Stock

Machine Gun Bunny Rabbit Patch - 3.1x3.75 inch. Embroidered Iron on Patch

  • ...lastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on t....
Check Stock

iBeautying Press on Nails - Metallic Mirror Purple Pink False Nails | Punk Metal Chrome Finish Short Reusable Fake Nails in 10 Sizes - 24 Nail Kit with Jelly Glue Pad

  • Package contains: 24 pieces glossy fake glue on nails,1pc double-sided nail file,24 pad /sheet double-side nail stickers, 1pc cuticle stick for removing false nails.
  • Press-On Nail Kit：purple-pink are suitable for matching daily outfits and show out confident, metallic punk plated design is a versatile look to easily take you from day to night!.
  • Package Contents: about 24 PCS press on nails & a nail file & cuticle stick & jelly glue stickers. NOTE: if you want long-lasting, please use pro. nail glue instead of adhesive tabs. Nail glue stickers better for temporary task..
  • Various nail sizes: at least 10 different sizes ensure a totally custom fit. It's very easy to DIY home nail art. These lustrous salon UV finish nails kit are perfect suitable for party, prom, dating and wedding ect. Perfect gift for your friend, wife, women and girls..
  • Apply easy: takes 5 minutes to make your finger beauty. Just choose the correct size and apply(stay longer if you clean your nails before use). Soak hands in warm water for 10~15 minutes, gently lifting nails from the side. Remove excess glue with a nail buffer, and store for reuse..
Check Stock

Respect is Earned Loyalty is Returned Patch - 4x1.5 inch - Embroidered Iron on Patch

  • ...lastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on t....
Check Stock