Categories

Best Corrosion Inhibition

TRIM MicroSol 455 Low-Foam Semisynthetic Microemulsion Coolant 1-Gallon jug MS455/1

  • Low foaming for today's demanding high-pressure, high-volume applications.
  • Also for machining some aluminum alloys and nonferrous metals.
  • Provides superior corrosion inhibition on cast iron and eliminates hot chip" and clinkering problems".
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance.
  • Requires no special disposal or recycling.
Check Stock

TRIM Cutting & Grinding Fluids MS685/1 MicroSol 685 High Lubricity Semisynthetic Metalworking Fluid, 1 gal Jug

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys.
  • Reduces oil mist and residues often associated with high-lubricity alternatives.
  • Contains no nitrites, triazines, phenols, or sulfurized EP additives.
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals.
  • Forms stable microemulsion in hard water environments.
Check Stock

TRIM Cutting & Grinding Fluids MS685/5 MicroSol 685 High Lubricity Semisynthetic Metalworking Fluid, 5 gal Pail

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys.
  • Reduces oil mist and residues often associated with high-lubricity alternatives.
  • Contains no nitrites, triazines, phenols, or sulfurized EP additives.
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals.
  • Forms stable microemulsion in hard water environments.
Check Stock

TRIM Cutting & Grinding Fluids C270/5 High Performance Synthetic Coolant 5 gal Pail

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites.
  • Provides excellent corrosion inhibition on all common ferrous alloys.
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur based EP additives.
  • Extremely low carry off for very low total operation costs.
Check Stock

TRIM Cutting & Grinding Fluids C270BD/1 High Performance Synthetic Coolant, Blue Dye, 1 gal Jug

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels and copper alloys as well as plastics and composites.
  • Provides excellent corrosion inhibition on all common ferrous alloys.
  • Does a great job in form grinding, drilling, tapping and reaming operations without chlorine or sulfur based EP additives.
  • Extremely low carry off for very low total operation costs.
Check Stock

TRIM Cutting & Grinding Fluids C320/5 High Lubricity Synthetic Coolant, 5 gal Pail

  • Excellent extreme pressure (EP) lubricity to do many drilling, tapping, reaming, and form-grinding operations without any chlorine or sulfur-based EP additives.
  • A very versatile product which works well in mixed metal situations including aluminum, steel alloy, cast iron, and copper alloy.
  • Provides good corrosion inhibition on all common ferrous and nonferrous alloys.
  • Keeps grinding wheels clean and sharp for higher "G ratios", better surface integrity, and faster stock removal.
  • Contains no DEA, nitrides, phenolic compounds, "formaldehyde releasers", or chlorine.
Check Stock

Valvoline General Purpose Amber Grease 14.1 OZ Cartridge Case of 10

  • Outstanding performance for virtually all applications: high temp wheel bearings, disk brake wheel bearings, U-joints, couplings, severe service high....
  • Flawless operation in temperatures from - 40F up to 400 F for continuous operation.
  • Unmatched, high adhesion to metal components.
  • stays in place in the most extreme service.
  • state-of-the-art additive pack for excellent corrosion inhibition, the optimal flow rate in grease pumping....
  • One grease for almost everything with the highest performance rating for nearly all applications.
Check Stock

TRIM Cutting & Grinding Fluids C270CGBD/5 High Performance Synthetic Coolant, Blue Dye, 5 gal Pail

  • C270CG bd is compatible with a very wide range of materials including cast iron, steels, and copper alloys, as well as plastics and composites.
  • Provides excellent corrosion inhibition on all common ferrous alloys.
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives.
  • Extremely low carry off for very low total operation costs.
Check Stock

3M AquaPure AP431 Scale Inhibition Replacement Cartridge, Easy Change High Capacity Water Filter for AP430SS

  • Scale and corrosion inhibition helps extend life of water heaters.
  • Unrestricted flow design provides up to 10 gallons (37.9 liters) per minute.
  • Disposable cartridge inhibits scale for up to six months before replacement.
  • Slow-dissolve rate provides consistent dosing and long cartridge life.
  • When used with a system that is installed before the hot water system, the cartridge also helps protect appliances and pipes downstream.
Check Stock

RAVENOL J1D2108-004 ATF Automatic Transmission Fluid - T-IV Fluid 4 Liter

  • Please see Product Description regarding the California Proposition 65 Warning.
  • Very low pour point with a high stable viscosity index for excellent transmission performance in all conditions.
  • Provides high thermal stability even when the transmission is subjected to extreme conditions while also providing anti-friction characteristics thus....
  • Protection against wear, corrosion, and foaming while maintaining a neutral behavior towards sealing materials and a inhibition to non-ferrous metals.
  • Note: See “Product Information/Technical Details/OEM Part Number” section in this product listing for OEM approval details, OEM part numbers, oil....
Check Stock

TRIM Cutting & Grinding Fluids MS585XT/5 MicroSol 585XT Nonchlorinated Semisynthetic Microemulsion Coolant, Extended life , 5 gal Pail

  • Dramatically extends useful life without the need for tank-side biocides or fungicides.
  • Low foaming for todays demanding high-pressure, high-volume applications.
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites.
  • Optimized combination of cooling and lubricity for titanium machining applications.
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems.
Check Stock

AQUACREST AP431 Cartridge, Compatible with Aqua-Pure AP431 Hot Water Scale Inhibitor for AP430SS (Pack of 3)

  • ???? Inhibits scale build-up to help extend the life of water systems and water appliances.
  • ???? It’s recommended you replace the inhibitor every 6 months for effective scale inhibition, which will vary based on water conditions..
  • ???? Offer reasonable price without compromising quality..
  • ???? Replacement for 3M Aqua-Pure AP431, HF8-S, KleenWater KW431..
  • ???? Interchangeable with 3M Aqua-Pure AP430, AP430SS and SF18-S Scale Inhibition System..
Check Stock

TRIAX Marine Gear Oil SAE 90 - Full Synthetic - Compatible with All Stern Drives, Bow Thrusters, and Lower Gear Units in All Boats and Jet Ski from All OEM's (6 Quart Pack)

  • VERY HIGH CORROSION INHIBITED: For both salt and freshwater use.
  • prevents rust and corrosion on transmission components.
  • protects brass, copper, and aluminum alloys.
  • WIDELY COMPATIBLE: Compatible with all lower gear units / sterndrives on all JetSkis, Jet Pumps, and Sports Jets made by Mercury / Mariner, Johnson / Evinrude, Bombardier, Honda, Yamaha, Suzuki, Force / US Marine, Nissan, Tohatsuand Harbormaster.
  • Sterndrives made by Mercruiser-Bravo, OMC / Bombardier, Volvo-Penta, Yanmar, Konrad, and Marine Drive Systems.
  • bow thrusters made by Harbormaster Marine.
  • and transmissions made by ZF Marine Transmission.
  • EXTREME OXIDATION STABILITY: Full synthetic formulation (unlike OEM fluids) provides exceptional thermal stability and oxidation inhibition even in high thermal and mechanical loads.
  • IDEAL FOR STORAGE: long term stability protects.
  • Contains specialized additives to maintain seal pliability helping to maintain water tightness of gear units preventing water intake.
  • Prevents gear slippage, sticking even with sudden high torque acceleration, towing or accidental over-revving (when the prop is outside of the water).
Check Stock