Categories

Best Corrugated Gas Connector Tube

LASCO 10-1259 Flexible Coated Stainless Steel Gas Range Supply Line 72-Inch 5/8 Inch ID with 3/4 Inch Pipe Thread Fittings

  • Premium quality gas hose and fantastic value!.
  • Made with durable material to withstand time.
  • Works as both Natural Gas hose or Propane line.
  • Great for different types of gas powered projects.
  • Most commonly used as Gas Range Connector.
Check Stock

EXCELFU Safety-Shield Gas Appliance Line Flexible Dryer Gas Hose Connector Kit - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated

  • Adapter Included 2 Pcs 5/8 In.OD Flare x 1/2 In. MIP (Tapped 3/8 In. FIP) and 2 Pcs 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
  • This gas appliance connector kit are designed for Ranges, Stoves, Furnaces or Boilers.
  • 304 Stainless steel flexible tubing with plated steel end fittings capacity 106,000 BTU.
  • 48 inch long stainless steel corrugated gas range and dryer connector kit are perfect for indoor or outdoor use.
  • This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
Check Stock

Grehitk Flexible Gas Line Connector for Dryer(3/4 24inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel

  • SIZE- Length 24 inch flexible yellow coated 304 stainless steel gas connector hose, flexible gas hose supply gas line connector adapter:2 pack 3/4 Inch FIP, 2 pack 3/4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape..
  • HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • It has good air tightness, durability, rust and corrosion resistance..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
  • EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped..
Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • ...Y LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
Check Stock

BrassCraft PSC1083 K5 Safety Plus Gas Installation Kit for Range Furnace and Boiler

  • 5/8 In. OD x 48 in. length corrugated stainless-steel gas connector with ProCoat coating to withstand prolonged exposure to harsh household chemicals.
  • Safety+PLUS Excess Flow Valve protects against gas fires and explosions - 3/4 In. MIP (with 1/2In. FIP tap) connection to gas supply or gas ball valve.
  • Includes multiple steel fittings to fit most gas appliance inlets: 1/2In. MIP (with 3/8In. FIP Tap) fitting & 3/4In. MIP (with 1/2In. FIP Tap) fitting.
  • Fits all current and most older five to six burner ranges, furnaces and boilers.
  • Temperature rating: 32 Degree to 150 Degree F. Pressure rating: 1/2 psi certified.
Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

  • ...e is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
  • 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas leakage.Really convenient and 100% safety..
  • 【Installation】-High temperature resistance,Low pressure resistance,Explosion-proof and compressive material, it can be installed exposed to indoor light , or it can also be embedded in concrete, or behind the wall in dry wall systems as needed. also Suitable for burial installation,Underground Installation easier to handle Bends around corners,eliminating need for additional joints and fittings..
Check Stock

BrassCraft CSSL45R-72 P Safety PLUS Gas Appliance Connector with 3/8 OD EFV and 1/2 MIP x 1/2 FIP x 72

  • 1/4 In. ID (3/8 In. OD) x 72 In. corrugated stainless steel connector with corrosion resistant coating.
  • Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions - 1/2 In. MIP connection to gas supply or gas ball valve.
  • Approved for indoor and outdoor use. 100% Leak Tested.
  • Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures.
  • CSA certified. Designed, machined & assembled in the USA.
Check Stock

Medline Industries DYNJAA6040 Corrugated Anesthesia Circuits, Adult, 60\ (Pack of 20)

  • Dual-limb circuits provide a high level of filtration protection.
  • All circuits contain a gas sampling elbow.
Check Stock

Hipa C1U-K42 Carburetor + Tune Up Kit Air Filter for Echo PB2100 Handheld Leaf Blower

  • Carburetor Replaces # Echo 12520020560 12520020561 12520020562 12520020563 12520020564 12520020565.
  • Carburetor Replaces Zama # C1U-K42 C1U-K42A C1U-K42B.
  • Compatible with ECHO PB-2100 handheld leaf blower.
  • Compatible with Echo PB-2155 Leaf Debris Blower, ES-2100 Shredder.
  • Package include: 1 carburetor, 2 gaskets, 2 primer bulb, 1 air filter, 1 spark plug, fuel lines & grommet assembly, 1 fuel filter, 1 vent, 1 corrugated fuel tube, 1 tube connector.
Check Stock

Medline Industries DYNJAA0104 Corrugated Anesthesia Circuits with Gas Sampling Line with mask, Adult, Size 5 (Pack of 20)

  • All circuits contain a gas sampling elbow.
  • Corrugated 40" (102 cm) tube features parallel Wye.
  • 3L latex-free breathing bag and M/M GS line.
Check Stock

HIPA C1U-K78 Carburetor + Tune-Up Kit for ECHO Blower PB200 PB201 ES210 ES211 Shredder

  • Replaces # C1U-K78 A021000940 A021000941 A021000942 A021000943.
  • Fit ECHO ES-210 PS200 ES210 ES211 PB200 PB201 PB-200 PB-201 blower.
  • Fit Shindaiwa EB212 (P02411001001-P02411999999) Power Blower，SV212 (P02611001001-P02611999999) Shredder Vac Blower.
  • New High Quality Replacement Carburetor and Tune-up Kit.
  • Package include: 1 carburetor, 2 gaskets, 2 primer bulb, 1 air filter, 1 spark plug, fuel lines & grommet assembly, 1 fuel filter, 1 vent, 1 corrugated fuel tube, 1 tube connector.
Check Stock

Glass Froster CO2-CO2 Glass Chiller for Cups and Glasses-Instant Chill Your Glasses in Seconds

  • The Glass Chiller improves the efficiency of the bartender and improves the quality of the drink by removing the odors of the goblets (including the Shaker) in seconds.
  • Recommend to work with a CO2 canister with a DIP TUBE to take liquid gas from the bottom to achieve best frosting effect..
  • Cools at least 125 glasses with a 4L CO2 canister based on 6 seconds each glass..
  • You must never release the nut from the gas tube without having closed the gas entry of the pipe and having discharged it pressure..
Check Stock

HIPA Air Filter Fuel Line Tune Up Kit for ECHO Blower PB200 PB201 ES210 ES211 PB2100 PB2455 PB2155 SHC211 SHC212 ES2100 ES2400 SHC1700 SHC210 SHC2100 Hedge Clipper

  • ECHO PB200 PB201 PB2100 PB2155 PB2455 blower.
  • Fits ECHO ES210 ES2100 ES211 ES2400 Shred N Vac.
  • ECHO SHC1700 SHC210 SHC2100 SHC211 SHC212 hedge clipper.
  • Package include: fuel lines & grommet assembly, 1 vent, 1 fuel filter, 1 corrugated fuel tube, 1 tube connector, 2 primer bulb, 1 air filter, 1 spark plug.
Check Stock