Categories

Best Corrugated Tube Extrusion Line

BSEEN LED Dog Collar, USB Rechargeable, Glowing pet Dog Collar for Night Safety, Fashion Light up Collar for Small Medium Large Dogs (Royal Blue)

  • ONE SIZE FITS ALL: Collar measures 70 cm - But can be cutted to any length using scissors to fit your pet..
  • 3 LIGHT SETTING: Slow flash, quick flash and steady glow (Easy push button)..
  • RECHARGEABLE MINI USB: This item equipment with a rechargeable line..
  • EASY TO CONTROL: The LED flashing tube can be set to flashing or light continuously by means of touch switch..
  • DURABLE & TOUGH: The whole plastic tube part can be rub, extrusion in any shapes which won't affective the light of this collar.DescriptionFeature: This led dog collar is convenient to use. This item can be change for any shape because there is no circuit inside the plastic ring. Light would not be affected by bending or cutting, or dog bite..
  • Adjustable size:The total length of the collar is 27.5". The clear part can be cut from anywhere to adjust the size to your need..
  • Package includes: 1 x LED flashing dog collar 1 x USB cable.
  • Safety dog collar: In low light conditions,this dog collar can help keep your dog safe. AND It's easy to SEE your dog if the dog runs away..
Check Stock

Immuson Fanfold 4 x 6 Direct Thermal Shipping Labels with Perforations 500 Labels Permanent Adhesive White Mailing Labels for Thermal Printer

  • Label size: 4" x 6" . 500 labels per stack , 1 stack = 500 Labels..
  • Blank mailing label with perforated line for easily peeling off. Ultra-strong adhesive to corrugated boxes and envelopes..
  • Using Fanfold Labels instead of rolls reduces the time it takes to load new labels into your printer. No paper tube, more eco-friendly. 4. 500 labels....
  • 500 labels per stack, it will save more space than 2000 or more labels. You don’t need a big table to set printer and labels..
  • Compatible with Zebra, Intermec, Datamax, Printronix and other direct thermal printers. USPS, UPS, FedEx, DHL Amazon, eBay & PAYPAL Approved..
Check Stock

Plumb Shop Brasscraft CSSL54-24P Stainless Steel Gas Dryer Connector, 24-Inch

  • Flexible stainless steel corrugated tubing with stainless fittings.
  • A.G.A. Approved for indoor or outdoor use according to ANSI Z21.24 and Z21.45. 1/2" Male I.P.S. X 1/2" Female I.P.S. Fittings.
  • Corrugated flexible Stainless Steel gas dryer connector.
  • Polymer coated, 1/2-Inch inside diameter, 5/8-Inch outside diameter, tube with fittings.
Check Stock

Stihl 0000 930 4300 CF3 Pro Trimmer Line

  • The CF3 Pro Trimmer Line is formed using 3-component, tri-extrusion technology..
  • The CF3 Pro Trimmer Line is compatible with all STIHL nylon line trimmer heads, making the CF3 Pro at home on any landscape trailer or in any garage..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance..
Check Stock

EXCELFU Flexible Dryer Gas Hose Dryer Gas Appliance Line Connector with Fittings Compatible with 1/2' OD 1/2' MIP x 1/2' FIP Hose Connection, Stainless Steel(6 Feet)

  • Hose Fittings are compatible with 1/2" MIP and 1/2" FIP, it can create a secure metal connection for heavy-duty use.
  • Designed for gas dryer: This 72" Flexible Stainless Steel Gas Appliance Line is not universal, it is mainly designed for gas dryers and not for ovens or ranges.
  • Product Parameters: Inner dimensions of this line are 3/8", Outside dimensions of this line are 1/2".
  • Corrugated design: This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
  • Easy to install: No tools need to install the piping. It come with male and female iron pipes for easy connections. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

THOMAS & BETTS HSC2-20 HEATSHRINK ENDCAP#4-4/0(pkg 2)

  • [PARAMETER] Length: 4.95 Meter/ 16.2 Feet.
  • [MATERIAL] This corrugated tube is made of plastic, it protects your cables running from UV, abrasion and oil, etc...
  • [FLEXIBLE] Corrugated pipe design, flexible enough for your bending demands..
  • [TYPE] The wire wrap is closed, so the cables would not slide out. If the split wire loom tubing is needed, please open the hose with a scissor..
  • [APPLICATION] Widely used for the wire or hose protector in various of occasions, such as the electrical insulation, the lighting equipment, as well as, for gardening, office, home, etc..
Check Stock

0000-930-2340 Trimmer Line .095" (280') Orange 1 Lb Roll

  • An extremely robust, long-lasting trimmer line designed for some of the toughest trimming applications..
  • This rugged line is formed using 3-component, tri-extrusion technology..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance.
Check Stock

BIQU H2 Extruder, V2.0 New Upgraded Dual Gear Extruder, Smooth Not Easy to Block 3D Printer Direct Extruder 1.75mm Filament for BIQU B1, Ender & CR Series Printers, CR-10S Pro

  • ...Gear: using bimetallic tube (copper alloy + GRADE5 titanium alloy), high temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion..
  • ✔️All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better..
  • ✔️Extremely Smooth & Reducing Clogging: The smoothness of the throat and the inner wall of the nozzle reaches Ra0.4, which can effectively prevent clogging. H2 V2.0 adopts high-quality titanium-copper alloy hose, which has better heat dissipation and high temperature resistance, and the printing temperature can be as high as 400°C. It is the best quality hose material on the market. The hose is easy to disassemble, making it easier to use. convenient..
  • ✔️Lightweight & Compact & Powerful: BIQU H2 extruder weighs only 219 grams....
Check Stock

Creality 3D Printer CR-10S Pro V2 with BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm 11.8x11.8x15.7 inch with Capricorn PTFE 95% Pre-Assembled Printer

  • BL TOUCH AUTO LEVELING: Matrix automatic bed leveling, quality BLTouch automatic leveling device. CR 10S Pro V2 can automatically measure the height....
  • 500W MEANWELL POWER SUPPLY: The CR-10S Pro V2 3d printer comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power....
  • UPGRADED SILENT MAINBOARD:Creality 3D printer Cr 10s Pro v2 comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power....
  • HIGH-QUALITY EXTRUSION MECHANISM: Upgraded gear extrusion structure has double high-density gears and big extrusion force for smooth feeding. Z-axis....
  • CAPRICORN BOWDEN TUBING: Imported Capricorn PTFE tube with high temperature resistant makes the feeding smoother and ensure great printing texture in....
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

uxcell Polyethylene Spiral Wrapping Band Cable Wire Manager 10mm Dia 7M Long

  • [MATERIAL] This corrugated tube is made of plastic, it protects your cables running from UV, abrasion and oil, etc...
  • [FLEXIBLE] Corrugated pipe design, flexible enough for your bending demands..
  • [TYPE] The wire wrap is closed, so the cables would not slide out. If the split wire loom tubing is needed, please open the hose with a scissor..
  • [APPLICATION] Widely used for the wire or hose protector in various of occasions, such as the electrical insulation, the lighting equipment, as well as, for gardening, office, home, etc..
Check Stock

Libraton Tubing Cutter 3/16\ to 1-1/8\

  • SPECIFICATIONS: Libraton Mini Tubing Cutter is designed to cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 3/16" to 1-1/8" ( 4-28mm ) Outer Diameter OD..
  • GREAT FOR SMALL SPACE: This tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • HIGH PERFORMANCE CUTTING BLADE: Blade of our pipe cutter is made of most durable and high quality Alloy Steel for quick and clean cut..
  • STURDY: The copper tube cutter body is made of light weight and durable heavy duty alloy steel, 2 flare groove rollers for precision cuts operation, strong corrugated knob for comfortable stable operation..
  • EASY TO OPERATE & AFTER-SALE SERVICE GUARANTEE: Rotate the knob to grip tube, revolve copper tubing cutter around the tube, tighten grip smoothly after each full circle until full cut. Please let us know if you have any problem with this copper tube cutter. Our service team promise to reply to any of your messages within 24h..
Check Stock