Categories

Best Cost efficient Gear

ECOTRIC UL Certified 500W Electric Bike 26 Adult Electric Bicycles 36V 12.5AH Removable Lithium Battery Ebike with Suspension Fork Aluminium Frame Beach Snow Mountain E-Bike for Adults White

  • FEATURE- Now you are looking at a powerful and cost-effective mountain e-bike, 26 inch, with 500W rear motor and 36V/13AH lithium battery. Its shock....
  • 500W BRUSHLESS GEAR MOTOR- Ecotric Bicycles Set Speed Limit According To United States Federal Regulations, Maximum Speed In Power Mode Is....
  • SUEPENSION FORK-Dual suspension fork can absorb vibration efficiently, providing a more comfortable riding experience on rough roads..
  • DISPLAY- 36V LCD Display, 6KM assist model, 5-speed display, W/ φ31.8 display support, one key repair function, plug SM-5Y, 36V dedicated (rated....
  • 4 WORKING MODES- A powerful and cost-effective mountain e-bike. 1. Pedal Assist Mode: The motor will assist you with a moderate amount of power as you....
Check Stock

50PCS Abrasive Buffing Polishing Wheel Set for Rotary Tools,Non-Woven scouring pad Brush Polishing kit,Grit 800 Removal of Rust,Deburring on Metal Surface,with 3mm Mandrel

  • These polisher abrasive buffing wheel are used for Dremel DIY engraving, grinding, polishing.Ideal for Removing Rust/Corrosions from Any Metal Surfaces,fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel..
  • Buffing wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces.Widely used in derusting, grinding, sanding, deburring and stripping residue..
  • Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost,good wear resistance, durable and practical..
  • Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
  • Size:diameter about 1 inch(25mm).Shaft 3mm(approximatoly 1/8").
Check Stock

GDNTMU 2 Stroke 2.3HP Outboard Motor Boat Engine Heavy Duty Fishing Boat Engine Water Cooling CDI System 8500r/min(US Stock)

  • 【MULTI-FUNCTIONAL OF TWO-STROKE MOTOR 】- 2-STROKE motor is fixed on the outside of the beam and is designed to pivot on its mounting seat to control the direction of thrust. Therefore, in addition to providing propulsion, the outboard also provides steering control and a perfect balance of power and efficiency. When the engine is not running, Skeg can also act as a rudder. Note that the motor must be started underwater..
  • 【MARINE LIGHT AND SMALL OUTBOARD ENGINES FOR KAYAKS AND CANOES (MARINE ENGINES) 】- Increasing low horsepower (two-stroke) outboard engines can strengthen boats such as kayaks and canoes. Two-stroke engines are louder, less fuel efficient, and maintainable, but they provide higher performance. If the rower?s arms become too tired and/or need to paddle hard, an electric motor can be helpful..
  • 【ADVANCED AIR COOLING SYSTEM 】- Advanced engine water cooling system can improve engine performance. The air cooling system allows you to fish all day without overheating. Due to water quality issues, air cooling eliminates the time for the pump part, which is very useful for daily use..
  • 【ADDITION FUNCTIONS】 - Features 360 degree steering rotation for reverse without gear shifting.Start-In-Gear protection/clutch feature prohibits prop....
Check Stock

FPPO 50PCS Abrasive Buffing Polishing Wheel Set for Rotary Tools,Removal of Rust Deburring on Metal Surface with 3mm Shank,Mini scouring pad Brush Polishing kit(grit 320 red 50pcs)

  • These polisher abrasive buffing wheel are used for Dremel DIY engraving, grinding, polishing.Ideal for Removing Rust/Corrosions from Any Metal Surfaces,fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel..
  • Buffing wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces.Widely used in derusting, grinding, sanding, deburring and stripping residue..
  • Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost,good wear resistance, durable and practical..
  • Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
  • Buffing wheels diameter:1 inch(25mm).Shanks are 3mm（approximately 1/8" ).Polishing Wheels mounted 3mm Mandrel fits most Rotary Tools, Polishers, Hand Drill etc..
Check Stock

KOUGER De-ntal Flexible Denture Machine 110V 400W Lab Equipment Electric hydraulic press Dentistry Injection System

  • ♛ BASIC INTRODUCTION - Den-tal Denture Denture Machine is a 400W/110V den-tal denture laboratory equipment used to make flexible removable partial dentures..
  • ♛ HIGH PERFORMANCE AND HIGH EFFICIENCY - The denture injection system is easy to operate, has a long service life, low maintenance cost, and high success rate. The Den-tal laboratory equipment of the denture injection system is essential for dentists..
  • ♛ SIMPLE OPERATION - simple operation, time-saving and high casting success rate. Ordinary gear boxes can also be injection molded..
  • ♛ PRODUCT COMPOSITION - Den-tal denture injection device consists of heater and hot press. Heater: temperature control, timer and electrical system. Hot press: frame, roller, heater, bracket and flask..
  • ♛ PACKAGE SIZE - 40*34*57cm (15.7x13.3x22.4 inches), gross weight: 30kg (66.1 pounds)..
Check Stock

Shimano Fishing Ocea Jigger 2000Nr Hg Conventional Reels [OCEAJG2000NRHG]

  • HAGANE Body: The HAGANE Body is a metal reel body with high rigidity. The body rigidity and impact resistance virtually eliminates body flexing. The result transforms the angler's actions directly into cranking power. It's efficiency through strength..
  • S-Compact Body: Allows for all-day comfort and improved fishability by making the palming side plate up to 25% smaller than A side plate.
  • MicroModule Gear: The MicroModule system creates a smooth retrieve. The new gear set makes use of smaller teeth and more of them. This means that there are more contact points between the drive gear and pinion gear. The result is a more efficient gear train with less gear feel..
  • X-Protect: By combining our water repellent coating and our specially designed, water channeling, labyrinth construction, X-Protect provides high-level water resistance without sacrificing light gear and rotor rotation..
  • Cross Carbon Drag: This drag material provides a wider range of drag settings, along with the smoothest Shimano drag performance ever..
Check Stock

Rotary Tool Accessories Kit, Abrasive Wheel Buffing Polishing Wheel Set,Drill Bits, Sanding disc, Felt Wheel, Wire Brush and Saw Blade for Cutting, Grinding and Polishing

  • 165 PCS rotary tool accessory kit, suitable for grinding, polishing, cutting, shaping, drilling, deburring,cleaning,etc..
  • A variety of grinding heads meet different polishing needs, rough polishing, medium polishing, and fine polishing..
  • Suitable for DIY creation and detailed work. Can be used for polishing the surface of wood, metal and stone,glass, ceramics..
  • High efficiency, low cost,good wear resistance, durable and practical..
  • Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
Check Stock

Fan Filter Unit Clean Room with HEPA-Filter Cleanliness Class 100 Laminar Flow Hood for Lab Phone Repair

  • ♛--FFU INDUSTRIAL FILTER FAN-- This vertical laminar flow hood applies aluminum blade fan, which rated air volume is 706cfm. The fan has a 3-gear switch, and the average air flow velocity through filter is 0.45-0.60 m/s. Extremely low operating power consumption, effective cost reduction..
  • ♛--HIGH EFFICIENCY FILTER-- This air flow clean bench uses HEPA high efficiency filter, which can filter 99.99% of particles with a diameter greater than or equal to 0.3 micron. The fan absorbs the air from the top of it, and through the pre-filter and HEPA filter. The clean air after filtering will be send out by the whole air supply grille..
  • ♛--110V COPPER MOTOR-- This air flow clean workstation uses 110V copper motor, instead of using a transformer directly on a 220 V machine. Also. Multi-wing centrifugal fan can provide high air volume and high static pressure conditions, it ensures that it can be used in different environments..
  • ♛--ALUMINUM STAND-- The worktable bracket of the laminar flow hood is made of 40*40 high-strength aluminum material, which is firm and not easy to deform. With 40*40 connection angle code, it can be connected firmly and seamlessly..
  • ♛--WIDE APPLICATION-- This class 100 dust free worktable is widely used in factories, laboratories....
Check Stock

Kuvik Titanium Wood Stove - Ultralight and Compact Stove for Backpacking, Camping, and Survival

  • ...Boil Water, Cook Food, or Just Make a Nice Fire for Heat and Enjoyment. It Can Do It All!.
  • Adjustable Ash Catcher: Get Exactly the Heat Levels You Need Thanks to the 2 Adjustable Heights (2.8”/3.8”). Use Intense Heat for Grilling or Lighter Heat for Warming Up Previously Cooked Food. This User-friendly Design is Efficient and Easy to Use!.
  • Compact, Portable & Lightweight: It Can Be a Pain Lugging Around One of Those Heavy Gas Stoves, but This Solo Camping Wood Stove is Super Portable and Weighs Just 1.9lbs! Assembles in Seconds, No Tools Required. It Can Fit into Your Gear Bag, the Back of Your Car, and Many Other Places! It’s the Perfect Way to Enjoy the Outdoors when You’re Camping, Fishing, or Mountaineering!.
  • Stable & Durable: Like Any High Quality Gear, the Ohuhu Stainless Steel Backpacking Mini Stove is Made to Last Through All Sorts of Adventures. Built with Top-notch Stainless Steel, It Can Support Pots and Pans, Hot Temperatures of the Fire, and the Journey There and Back Without an Issue. It Also Comes with a Detachable Stainless Steel Plate Which Helps Contain the Firewood While It’s Burning..
  • Use Wood, Gas and More: What’s Great About This Stove is Its Wide Compatibility with All Sorts of Fuel Types. Not Only Can You Use a Traditi....
Check Stock

Boston Gear G486Y-G Bevel Gear, 4:1 Ratio, 0.313\ Bore, 32 Pitch, 64 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • ★[OPTIMAL PERFORMANCE]: EXAUTOPONE premium Stainless Steel Bevel Gear Set made of premium stainless steel material improves gear mesh, and with delicate workmanship, which is durable and hard, and long service life..
  • ★[GREAT APPLICATION]:EXAUTOPONE premium Stainless Steel Bevel Gear Set provides over drive for the front axle, helping to pull car climb easily. And it can guarantee to meet the original equipment..
  • ★[FITMENT]:Compatible with AR44 axles, including a 8T bevel gear and a 30T bevel gear..
  • ★[HIGH QUALITY]:EXAUTOPONE premium Stainless Steel Bevel Gear Set is 100% brand new aftermarket unit built to meet OEM specifications. easy to install and remove, ideal replacement for the old or broken one. Factory price with higher cost-effective..
  • ★[PACKAGE & WARRANTY]:Package Includes 1 Pcs X 30T/8T Stainless Steel Bevel Gear Set . Any question just contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

Kokuyo FitCurve Mechanical Pencil - 0.5 mm - Blue Body

  • Refillable lead reservoir offers long-lasting, cost-efficient use.
  • See-through barrel allows quick monitoring of lead supply.
  • Perfect for everyday use at home, the Office and at School.
  • Refillable Lead Reservoir Offers Long-lasting, Cost-efficient Use.
  • See-through Barrel Allows Quick Monitoring Of Lead Supply.
  • Perfect For Everyday Use At Home, The Office And At School.
  • Mechanical Pencil Is Perfect For Everyday Use At Home, Office And School.
Check Stock

LUBEWORKS Oil Transfer Pump Air Operated Pneumatic 40lpm / 10.6gpm Heavy Duty 5:1 High Fluid Pressure 870Psi for SAE240 Oils/Fluids (NOT for Gasoline or Diesel)

  • The 5:1 is perfect for fluid oil transfer in high volume and longer distance applications, such as truck shop service fleet facilities and in-plant applications.
  • Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.
  • Few moving parts in the air motor assembly means less downtime and low repair cost.
  • Large air porting design provides efficient use of compressed air supply for continuous pump operation without icing.
  • Typical fluids handled include motor oil, synthetic oil hydraulic, suitable for use oil to sae130 oil, gear oil, and automatic transmission fluid. Also Suitable for oil to SAE240 usage..
Check Stock

Electric Chainsaw Inner Gear, Plastic Electric Chainsaw Drive Sproket Replacement for 107713-01 and 717-04749 Electric Chainsaw

  • HIGH QUALITY--- Our electric chain saw internal gear is made of high quality ABS material, which is sturdy and durable. Size: (Dia.)*(H) 8.9*3.5cm / 3.5*1.4 inch(Approx.). Please confirm whether the size is appropriate before buying.
  • PERFECT REPLACEMENT TOOL--- The internal gear is a practical accessory for lawn mowers, hedge trimmers and chain saws, which can save on the cost of repurchasing the machine..
  • POWER SAW MODEL--- This internal gear is suitable for 107713-01 and 717-04749 electric chain saw. 55 tooth internal gear, 6-tooth metal chain drive. (Please Pay Attention to This Information).
  • EASY INSTALLATION--- Our internal gears are easy to install, and even if you are a layman, it is easy to install successfully..
  • ENVIRONMENTALLY FRIENDLY MATERIALS--- All the surface treatment of this internal gear is non-toxic, safe and environmentally friendly, so you can use it with confidence..
Check Stock