Categories

Best Countersunk Head Bolt

uxcell M8x80mm 10.9 Carbon Steel Countersunk Head Hex Socket Screw 8pcs

  • Package Content: 8pcs x Countersunk Hex Socket Screws.
  • Product Name: Countersunk Hex Socket Screws.
Check Stock

Anmas 30pcs M6 Length 20mm Furniture Joint Connector Bolt & Cap Nut Kit Use for Cot Bed Crib Bolts Hex Drive Socket Cap Bolts - Hex Socket Screws Head

  • Package Included: 30pcs x M6 Nut & Countersunk Bolt.
  • Used for: bed, table, chair, crib, or workbench, boards, cabinets, cupboards, other furniture.
Check Stock

100 Qty #12 Stainless Steel Countersunk Finish Washers | 304 SS Finishing Cup (BCP576)

  • The countersunk head screw gasket is made of pure copper, which is not easy to rot, moisture, and oxidation..
  • These screw washers are small in size, light in weight and easy to install and use..
  • This screw washer is precisely matched, and the bearing exterior of the bolt is large, and the lock is firmer..
  • These screw washers have standard concentricity, smoothly exterior, concentric..
  • Can be installed on many different types of materials. Wide range of applications..
Check Stock

Extremely Strong Neodymium Cup Magnets - 90 lbs Holding Force - 1.26' Industrial Strength Round Base Rare Earth Magnets - Countersunk Hole for #10 Bolt, 3 Mounting Screws Included

  • GREAT EXTREMELY STRONG NEODYMIUM MAGNETS - For holding or attaching objects to surfaces with magnetic properties. Single round magnet's measures 1.26" (32mm) in DIAMETER and 0.31" (8mm) in HEIGHT. PULL FORCE: 90 LBS (3 Mounting Screws Included).
  • SUPER EASY MOUNTING: COUNTERSUNK HOLE for easy use with #10 SCREW! This allows the screw head to sit below or flush with the magnets surface. The counter sunk hole on the magnet works with flat head screw to affix onto walls or cabinets.
  • NI+CU+NI TRIPLE LAYER PLATED, THE BEST COATING AVAILABLE. Tight tolerance +/-0.002". MAX OPERATING TEMPERATURE: 80°C/176°F MAGNETIZED THROUGH THICKNESS so that the N and S poles are on the opposite flat surfaces.
  • LIMITLESS USES: Base Rare Earth N52 Magnets with Countersunk Hole for #10 Bolt USE FOR A WIDE VARIETY OF PROJECTS. Industrial N52 Strength magnets are great above the workbench to hold tools that you use consistently, so they are within easy reach. Rare earth cup magnets will hold up some of your heavier hand tools quite well and very easily. The applications of this round base magnet include magnetic holding, lifting, antenna Mounting, positioning, meteorite hunting, tool magnetizer, magnetic t.
  • HIGHEST QUALITY WITH A WARRANTY: X-bet MAGNET makes top neodymium magnets....
Check Stock

MIKEDE Strong Magnets with Hole, 100lb + Heavy Duty Neodymium Cup Magnets with Stainless Screw for Wall Mounting, Rare Earth Magnets Round Base Cup Magnets, 1.26'D x 0.2'H, Pack of 6

  • 【Powerful Magnetic Force】- Our round base cup magnets are made of rare earth neodymium metal material, which makes their magnetism very strong. Each magnet is 1.26 inch (32mm) in DIAMETER and 0.24 inch (6mm) in HEIGHT. PULL FORCE: 100 LBS+ (Vertical).
  • 【More Durable than Others】- These countersunk magnets with hole are made of NdFeB material with a nickel-plated coat for maximum durability and protection against corrosion. Steel cups protects magnets from breaking which greatly increase the longevity of the rare earth cup magnets.
  • 【Easy to Install】- These countersunk hole magnetic discs for easy use with 6 screw(Included), which makes you able to use them in two different ways. You can not only use these industrial magnets on metallic items, also on non-metallic items. The neodymium cup magnets with countersunk center hole that is perfect for mounting with a flat head screw or bolt.
  • 【Useful Magnetic Tools】- These strong industrial cup magnets are great above the workbench to hold tools that you use consistently, so they are within easy reach. The heavy duty neodymium cup magnets will hold up some of your heavier hand tools quite well and very easily. Perfect for organizing and hanging in workshop, and decluttering your home, garage, busin....
Check Stock

uxcell 50Pcs Black M3 X 10mm Alloy Steel Hex Socket Flat Head Countersunk Screws Bolts

  • Package Content: 50(+/-2%)pcs x Hex Socket Flat Head Countersunk Screws.
  • Thread Size(d*L): M3x10mm/0.12"x0.39"(D*L).
  • Product Name: Hex Socket Flat Head Countersunk Screws.
Check Stock

TOUHIA 50pcs #8 Finishing Washers Stainless Steel Cup Countersunk Washer

  • Package Content: 50pcs x Finishing Cup Washers.
  • Finish Washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance.
  • Countersunk washer can prevent a nut, bolt or screw from pulling through the material. Commonly used in automotive, pipe, and other electrical applicance.
  • Material: These finish washers are 100% Stainless Steel, corrosion resistant and rust resistant, can be used for a long time.
  • Risk Free Shopping: TOUHIA offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

100#8 Countersunk Finish Washer Black Zinc Plated Brass

  • Material:Made of high quality 304 Stainless Steel,corrosion resistant, sturdy and durable..
  • Shiny washer that allows the screw to recess into the center giving a clean,decorative presentation..
  • Finish washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance..
  • Washers are great to have around for use in wood and wet environments.Washers are usually used where larger outside diameters are required to increase the bearing surface and reduce the surface load..
  • Package included:100pcs #8 Countersunk Washers.The washer is designed for flat head or oval head screws..
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools Premium Metric H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 509S-007M

  • High Speed Steel. Straight Shank. Metric Set(7 Pcs/Set): M3, M4, M5, M6, M8, M10, & M12.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

iexcell 250 Pcs Metric M3 x 6/8/10/12/16 Alloy Steel 10.9 Grade Hex Socket Flat Head Cap Screws Bolts Kit, Black Oxide Finish

  • 10.9 Grade Alloy Steel, Black Oxide Finish.
  • Head Diameter: 5.94mm/0.23",Thread Size(Dia.): 3mm.
  • Total Length(Include Head): 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 16mm/0.47".
  • Screw Head Style: Flat Head (Known as Countersunk Head).
  • Screw Drive Style: Hex Socket ( Known as Internal Hex ), Hex Size 2 mm.
  • Package: Total 250 Pcs Hex Socket Flat Head Cap Screws, 50Pcs Per Size, Come in an Easy-use Separated Girds Plastic Storage BoxDescription Machine Screws, 10.9 Grade Alloy Steel, Black Oxide Finish.
  • Easy to Store :These Screws Come in an Easy-use Separated Girds Storage Box.
  • ---Item------------Thread Length-------Total Length.
  • M3 x 6--------------4mm-------------------6mm.
  • M3 x 8--------------6mm-------------------8mm.
  • M3 x 10-------------8mm------------------10mm.
  • M3 x 12-------------10mm-----------------12mm.
  • M3 x 16-------------14mm-----------------16mm.
Check Stock

cSeao 110pcs Stainless Steel Finishing Cup Countersunk Washers Assortment Kit, 6#/ 8#/ 10#/ 12#

  • Used for RC Airplanes Boats Cars FPV Helicopters.
Check Stock