Categories

Best Cr Rubber Sheet

558 Green Red dot Sight +G3X 3Magnifier Holographic Reflex Sights with Switch to Side Quick Detachable QD Mount for Hunting (TAN)

  • ACCURATE - Crisp 2 MOA red dot sight allows for accurate, both-eyes-open shooting. 11 red dot brightness settings provide optimal visibility in any light conditions. Multi-coated, scratch resistant lenses provides enhanced image clarity..
  • UNBEATABLE VALUE - Exceptional battery life – up to 50,000 hours at the lowest brightness setting. Genuine Renata CR2032 Lithium battery included. Factory direct pricing - no distributor markup..
  • FLEXIBLE - Easily flip the 3x Magnifier to go from up-close shooting to long range precision with ease! The magnifier allows you to use your red dot sight like a scope when needed..
  • DEPENDABLE - Red Dot is Fully waterproof with sealed housing (IPX7), and shockproof circuitry resists damage from rough handling. The Magnifier has a durable 6061-T6 housing with a steel mount for a solid hold and positive lock-up. Lifetime Warranty on the whole package!.
  • INSIDE THE BOX - Red dot sight, Riser Mount, 3X Magnifier, Flip-To-Side Mount, CR2032 Battery, Rubber bikini cover, Instruction sheet, Lens cloth, Allen wrench.
Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

Ceality Glass Bed for CR-10S Pro, CR-X, CR-10 V2, Ender-3 Max, 310x320x4mm, Official Version Build Surface

  • No Edge Curling - Official printer glass bed offered by Creality, its microporous coating on the upper surface can adsorb the model to glass bed surface, no worry of print edges curling..
  • Universal Application - This printer glass plate is well suited for most types of filament including: PLA, ABS, PETG, Nylon, TPU, Polycarbonate, wood and more..
  • Excellent Flatness - Improved borosilicate glass plate provides more flat and more smooth build surface than magnetic mat or pei sheet, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed.
  • This glass bed could be fixed with middle sized clips and wash with alcohol or acetone at room temperature..
  • Compatibility - This printer parts is only applicable with Creality printers as following, CR-10S Pro, CR-10S Pro V2, CR-X, CR-X Pro, CR-10 V2, CR-10 V3 and Ender-3 Max, pls confirm if this glass print bed compatible with your printer..
Check Stock

Kywoo Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 305x320mm for Tycoon Max/CR-10 / CR-10S / Lulzbot Taz 6 / Lulzbot Taz 5 / Tevo Tornado / Hictop Prusa i3 DIY

  • 【Adopted USA technology】：Designed beautifully and easily, processed by USA machine to make the PEI sheet unified and canonical during process. Each producing procedure is speculated strictly to make sure PEI sheet is perfect before selling. PEI with the frosted surface is of strong high-temperature stability, flame retardant, heat resistance, high strength, wear-resistance, and good printing stability..
  • 【Powerful adaptability】: Whatever ABS or PLA filaments (along with many other materials) can be used for printing model directly on the PEI surface. Don’t need other additional adhesives, tapes, or slurry. High strength and heat resistance. ·Compatible with PLA, PETG, ABS and other most filaments..
  • 【Recycle usage】:PEI sheet can be used for many times whatever you print which kind of models, if you clean the PEI sheet with some isopropyl alcohol, you can continue to print other type of models. It has a long life span and easily to be cleaned. Soft magnetic sticker: Strong magnetic force.
  • 【Size is suitable】PEI sheet dimension is (305mm x 320mm) with a thickness about 0.04 inches (1mm). This PEI sheet is made specifically for large format printers such as the Tycoon Max/CR-10 / CR-10S / Lulz....
Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • 【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....
Check Stock

DOWELL Micro Wire Cutter Diagonal Flush Cutters 6 Inch Precision Side Cutters Cutting Pliers Wire Snips Heavy Duty

  • Head: Forged 60# CR-V steel, heat-treated, precision ground angled, high hardness & durable. Bend design is for hard to reach space..
  • Blades: This diagonal cutter has a hardened cutting edge is ultra sharp & long-lasting, providing a smooth, flat and clean cut..
  • Handle: Rubber dipped non-slip comfortable grip provides great leverage , spring-loaded mechanism minimizes hand fatigue..
  • Usage: This micro wire cutter is widely used in cutting soft materials like wire & cables, tie wraps, plastic sheet, edge banding. Also great for....
  • Maintenance: Cutters are covered with grease to prevent getting rusty. Wipe the cutters before using, store in a dry place..
Check Stock

LIVLOV V4 Bike Cadence Sensor, Bluetooth & ANT+ Cycling Cadence Wireless Bicycle Cadence Sensor IP67 Waterproof for Zwift Elite HRV Endomondo Peloton Bike Computers

  • ...x, RideWithGPS, Peloton, etc. If you want to confirm compatibility with your app, please send us a message on Amazon..
  • 【LIGHTWEIGHT and EASY to INSTALL】Size only 38.5mm×38mm×12mm & weight only 10.5g. No magnets, wireless sensor, it can be easily attached to your bike’s crank arm or shoes through the included rubber-elastic rings and double-sided tape..
  • 【BUILD QUALITY】V4 cadence sensor is waterproof, sweatproof and dustproof. Built-in replaceable CR2032 button battery, battery life up to 500 hours / wireless signal strength up to 20 feet. Easy to replace, use the coin to unscrew and replace the battery. Please remember to remove the battery insulation sheet before installation..
  • 【NOTE】Remove the insulating sheet of the pre-installed battery before usage, re-install the battery to switch between the speed and cadence mode. Unlimited cadence sensor battery replacements and one-year warranty. If you have any questions, please contact us..
Check Stock

AT3 Tactical ARO Micro Red Dot Sight - Pistol Mount, Low Mount, Optional Riser Mount - 3 MOA Compact Reflex Sight

  • ACCURATE – Sharp 3 MOA Red Dot + multicoated lens keeps your view clear & on-target, without the deep blue tint found in other micro sights. Tactile “click” adjustments for easy sight-in..
  • ADAPTABLE – Perfect for rifles, shotguns, & pistols. Top-loading battery and picatinny mount included. Compatible with Burris Fastfire / Vortex Venom mounts and handgun slide adapters..
  • LIGHTWEIGHT, BIG VIEW – Compact design + weight of only 1.8oz. Extra-large field of view for quick target acquisition..
  • DEPENDABLE – Waterproof with sealed electronics (IPX67). Lifetime Warranty. Shockproof components to unfailingly maintain zero. Stealthy, scratch resistant matte anodized finish..
  • INSIDE THE BOX – ARO Red Dot Sight, Rubber Lens Cover, CR1632 Battery, Low Picatinny Mount, Instruction sheet, Lens cloth, Allen wrench for Windage Adjustment, Torx Wrench for Mounting Screws, Flathead Screwdriver for Battery Cap.
Check Stock

LED Coasters,12 Pack Llighted Coasters,Glowing Wine Coasters,Blue LED Bottle Lights,Light Emitting Bottle Bottom lamp,Luminous Drink Cup Sticker,for bar,Party,Cocktail Decoration (Blue)

  • Suitable for various scenarios: such as bar, party, wedding, dinner decoration..
  • 　　The product includes: a box of 12 LED coasters, 8 spare CR1220 batteries (for coaster replacement batteries), 2 CR1220 batteries installed on each coaster..
  • 　　How to use: Open the package, unplug the insulating sheet (transparent plastic sheet) under the battery, and press the switch on the back to light up. There is a switch button on the back, press the switch button to switch modes..
  • 　　Mode selection: Monochrome has 3 lighting modes, fast flashing, slow flashing and always-on mode..
  • 　　Product advantages: It has an authorized 3M adhesive layer, which is flat and stable, and can be reused 2-3 times.
  • 4 high-brightness LED lights make the transparent container brighter at once.
  • it can be bright for more than 12 hours..
Check Stock

Bead Roller Round-Over Dies Commplete Set Cr12

  • 1.Material:Cr12, Rockwell Hardness = 40 HRC.
  • 2.Radius Dies Includes 4 piece set: 5/16 inch radius die set 1/2 inch radius die set 1 inch radius die set 1-1/2 inch radius die set.
  • 3.Round-Over Dies can produce smooth, even, large-radius edges in steel and aluminum.
  • 4.The Bead Roller Dies Fits for Most Bead Rollers With 22mm Shafts.
  • 5.For Radius Edges of Sheet Metal,Bead Roller Sheet Metal.
Check Stock

AT3 Tactical ARO Micro Red Dot Sight - Direct Mount, Low Mount, & Optional Riser Mount - 3 MOA Compact Reflex Sight

  • ACCURATE - Sharp 3 MOA Red Dot + multicoated lens keeps your view clear & on-target, without the deep blue tint found in other micro sights. Tactile “click” adjustments for easy sight-in..
  • ADAPTABLE – Perfect for rifles, shotguns,& pistols. Top-loading battery and picatinny mount included. Compatible with Burris Fastfire / Vortex Venom mounts and handgun slide adapters..
  • LIGHTWEIGHT, BIG VIEW – Compact design + weight of only 1.8oz. Extra-large field of view for quick target acquisition..
  • DEPENDABLE - Waterproof with sealed electronics (IPX67). Lifetime Warranty. Shockproof components to unfailingly maintain zero. Stealthy, scratch-resistant matte anodized finish..
  • INSIDE THE BOX - ARO Red Dot Sight, Rubber Lens Cover, Absolute Cowitness Riser Mount, CR1632 Battery, Low Picatinny Mount, Instruction sheet, Lens cloth, Allen wrench for Windage Adjustment, Torx Wrench for Mounting Screws, Flathead Screwdriver for Battery Cap.
Check Stock

DURATECH 8-Piece Pliers Set, Premium Cr-V/Cr-Ni Construction, (12\

  • 【Mechanic Pliers Tool Set】DURATECH 8-Piece Pliers Set for mechanics is great for gripping small parts, bending, shaping, twisting wire, crimping sheet metal, working with fasteners, and more. All pliers with the hardened cutting edge for cutting effortlessly..
  • 【High-Strength Materials】Professional forged Cr-V Steel & Cr-Ni Steel & high quaility steel, heat-treated, provides high strength and durability. Chrome plated for rust resistance, with high hardness and wear resistance..
  • 【3PCS Groove Joint Pliers】The pliers set contains 3 different sizes of Groove Joint Pliers: 12.
Check Stock

Boao 12 Pieces Bed Sheet Clips Straps Sheet Corner Straps Holder Mattress Clips, Adjustable Elastic Bed Sheet Grippers Straps Suspender Fasteners Holder (White)

  • Hassle-Free and Practical Approach: The mattress band was designed as a hassle-free way to keep your bottom fitted sheet from riding up off the corner and hold sheets on the bed. More practical and easier to install than sheet suspenders, sheet clips or sheet straps that go under your mattress..
  • Right Amount of Tension: The elastic rubber bed band for sheets is engineered with patented embossed ribbing that uses a horizontal tension design to secure bedding. The sheets tighteners band are designed to accommodate mattress sizes ranging from Twin/Full to King, and can even work with adjustable beds..
  • Durable and High-Quality: Made of natural rubber material, the bed sheet tightener band can firmly keep top sheets or other bedding from sliding around..
  • A Totally Unique Concept: Unlike sheet strap type products, Rubber Hugger bed band fits around the entire circumference of the mattress, securing the bottom fitted sheet and is conveniently hidden by your comforter..
  • Get Comfortable, Sleep Better: The Rubber Hugger sheets holder fits effortlessly to any mattress and removes all the fuss from loose sheets, helping you get a comfortable sleep..
Check Stock