Categories

Best Cr Steel Plate

Abu Garcia Revo Beast X Low Profile Baitcast Fishing Reel

  • 7 stainless steel HPCR bearings + 1 roller bearing.
Check Stock

Abu Garcia Revo SX RKT Low Profile Baitcast Fishing Reel

  • 9 stainless steel ball bearings + 1 roller bearing.
  • D2 gear design provides a more efficient gear System while improving durability.
Check Stock

Abu Garcia Revo Beast X Low Profile Baitcast Fishing Reel

  • 7 stainless steel HPCR bearings plus 1 roller bearing.
Check Stock

Abu Garcia Revo Beast Rocket Low Profile Baitcast Fishing Reel

  • 7 stainless steel HPCR bearings + 1 roller bearing provides increased corrosion protection.
  • X2-cräftic alloy frame and side plate for increased corrosion resistance.
  • Power stack carbon matrix drag System provides extreme drag pressures combined with unparalleled smoothness.
  • Dragger brass gear for extended gear life.
Check Stock

Abu Garcia Revo Beast Rocket Low Profile Baitcast Fishing Reel

  • 7 stainless steel HPCR bearings + 1 roller bearing provides increased corrosion protection.
  • X2-cräftic alloy frame and side plate for increased corrosion resistance.
  • Power stack carbon matrix drag System provides extreme drag pressures combined with unparalleled smoothness.
  • Dragger brass gear for extended gear life.
Check Stock

Swampfox Kingslayer Pistol Cut RMR Foot Print 1x22 Micro Reflex Dot Sights 3 MOA (Red Dot)

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon..
  • The included optic plate for glock also fits Taurus GX4, G3C & G3 with steel rear sights.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable.
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

Abu Garcia Revo Toro Beast Low Profile Baitcast Fishing Reel,Black,60-HS

  • 5 stainless steel HPCR bearings + 1 roller bearing provides increased corrosion protection.
  • X2-cräftic alloy frame and side plate for increased corrosion resistance.
  • Power stack carbon matrix drag System provides extreme drag pressures combined with unparalleled smoothness.
  • Dragger heavy duty provides increased Fighting power and extended gear life.
  • Duraclutch design provides improved engagement and durability.
Check Stock

Ade Advanced Optics RD3-006 Green Dot Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate

  • Comes with a ADE RD3-006 Green dot, a Picatinny plate and a pistol optic plate to REPLACe the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo).
  • We are listening! Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree..
  • The pistol plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C plate on amazon under different listing..
  • This GREEN dot comes with a picatinny mounting plate pre-assembled (might be packaged separately in the retail package, depends on the ADE model). Please use the allen wrench provided to take out the 2 hex screws(M3x6mm) on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates.
  • 4 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01"H x 1.9"L x 1.1W.
Check Stock

Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate

  • ...rus G3 with Original Rear sight(see photo).
  • We are listening! Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree..
  • This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search "ADE G3C/GLOCK PLATE" on amazon. Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor..
  • 5 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01"H x 1.9"L x 1.1W.
  • Shock proof，Fog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens..
Check Stock

Befenybay 3D Printer Direct Extruder Support Kit Easy Print Flexible Filament for Creality Ender-3, Ender 3 Pro,CR-10,CR-10S

  • 【Material】Plate is made of aluminum alloy sheet material,dual gear extruder is made of aluminum alloy.
  • 【Advantage】A direct drive extruder improves extrusion and retraction.
  • 【Widely Used】Used for Ender 3/Ender 3S/Ender 3 Pro/Ender 3 V2/CR-10/CR-10S 3d printer.
  • 【Filament】More material options,easy to print TPU flexible filament.
  • 【Package Include】1kit direct extruder support plate with 3pcs pulleys, 1pcs length 60cm motor extension cable,2pcs Teflon tubes,1kit metal dual gear extruder,1pcs 40mm height stepper motor.
Check Stock

Kingslayer

  • ...ctory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

Boao 50 Pieces License Plate Screws License Plate Frame Screws License Plate Fasteners for Fastening License Plates, Frames and Covers

  • Four Strong Black Nylon Machine Screws For attaching the REAR license plate. The Screws are Long enough for thick frames..
  • Will Fit if Your Car has threaded M6 License Plate Screw Holes About 3/4" deep..
  • Fits Toyota RAV4, Camry, 4Runner, Corolla, Prius, Highlander, Sienna, Land Cruiser, Avalon, Matrix, MR2, Spyder, FJ Cruiser, Tacoma, Venza, Yaris, Sequoia And More..
  • Fits Lexus SC, RC, LC, HS, CT, GS, ES, NX, UX, LX, GX, RX, IS, And More..
  • Fits Honda Civic (1992-2011), CR-V (2001-2011), Accord (1999-2012), Odyssey (2005-2017), Insight (2001-2012), CR-Z (2010-2016), Fit (2001-2013), Element (2003-2011), Crosstour (2009-2012), And More..
Check Stock

Elite BMX Bicycle 18', 20' & 26' Model Freestyle Bike - 3 Piece Crank (Oil Slick, 20')

  • Please select the correct bike size. 18″ Bike is suitable for 5-7 years-old (3ft 4″ – 4ft 4″). The 20″ is suitable for 11+ year old (4ft to 5ft 10″). The 26″ ( 4ft 2″ to 5ft 10″ /16+ in age).
  • 18″ Specs: FRAME: Hi-tensile steel (” Toptube). FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 4 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9TBRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. TIRES: 18×2.4″.
  • 20″ Specs: FRAME: Hi-tensile steel (20.5″ Toptube). FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 4 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9T. BRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. WEIGHT: 26.2 lbs. TIRES: 20×2.4″.
  • 26″ Outlaw Specs: FRAME: Hi-Ten / Cr-Mo. FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 2 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9T. ....
Check Stock