Categories

Best Crank Shaft Deutz

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

X AUTOHAUX 1\ to 1 1/8 Inch -1/4\ Engine Shaft Sleeve Adapter Kit with Step Key for Car

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1" to 1 1/ 8 inch -1/4" diameter. It comes with 2.05" step key..
  • [ ] Made from cold rolled stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Bapmic Mechatronics Sealing Sleeve and Double D Gasket Compatible with BMW E60 E65 E66 E70 E71 E90 335i

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4"to 7/8" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Lisle 58430 Shaft Type Seal Puller

  • Removes Cam Shaft and Crank Shaft Seals Without Damage to the Shaft.
  • Engage the adjustable hook behind the seal.
  • Brace the push rod against the engine head and push the handle to remove the seal.
  • Removes the seal without damage to the shaft.
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

JIANKUN Bike Crank Arm Set 170mm 104 BCD with Bottom Bracket Kit and Chainring Bolts for MTB BMX Road Bicycle Compatible with Shimano FSA Gaint Black

  • Material: Alloy 6061 crank, high intensity steel chainring..
  • Bottom Bracket Width: 68-73mm. BCD: 104mm. Crank Arm Length: 170mm, Crank Screw Aliber: 15mm..
  • Hollow one sprocket wheel shaft for mountain bikes, road bikes..
  • Compatible With: Shimano, FSA, Gaint ATX770 ATX770-D XTC 750..
  • Package Include: One fordged crank set, bottom bracket, 4 pcs single chainring bolts, crank screw, crankset bolt allen wrench..
Check Stock

Frabill 1664 Classic Tip-Up Wooden Boxed

  • Traditional hardwood design | 17.5" flag | Ultra-glide shaft for friction-free performance | Large capacity metal spools and dual counterbalance crank nobs to prevent wobbling and false movement.
  • Pre-lubed with Sub-Zero low-temp lubricant | Shaft-in-shaft design allows re-greasing for many seasons of successful ice fishing.
  • Dual trip settings (light or heavy) for versatile options depending on your preference.
Check Stock

Wadoy 3/4 to 1 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator

  • This steel shaft sleeve adapts a crankshaft from 3/4 inch to 1 inch diameter, it comes with step key that offsets from 3/16 inch to 1/4 inch..
  • Alters motors with a different diameter shaft and alters pulleys for a different speed or belt..
  • Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements..
  • Adapts larger wheel bores to smaller axles, works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Made from cold rolled steel, precision machined and tumbled, high durability..
Check Stock

Lisle 58500 Hook for Shaft/Seals , RED

  • Removes cam shaft and crank shaft seals without damage to the shaft.
  • Fits idler pulleys requiring 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and both 3/8" and 1/2" square drive sizes.
  • For more information check the main Lisle tool- 58430.
Check Stock

All Balls 22-1039 Steering Bearing Kit

  • Specs: Crank Shaft Bearing Kit , 2 Seals, 2 Tapered Bearings.
  • Kits contain upper and lower tapered bearing sets (cup & cone) along with specially designed seals tkeep water and dirt out and grease in.
  • Compatible With/Replacement For: Aprilia Caponord 1200 2014-2017, EVT Caponord 2001-2007, RST 1000 Futura 2001-2004, RSV Mille 2000-2003, RSV Tuono 2002-2005, RSV4 APRC R 2009-2015, RSV4 FACTORY 2009-2015, RSV4 RF 2016-2018, RSV4 RR 2016-2017, RSVR 2004-2008, SL 1000 Falco 2000-2003, Tuono 1000 R 2006-2015, Tuono 1100 V4 2016-2018, Tuono 1100 V4 RR 2016-2018, Ducati 1098 2007-2008, 1098 R 2008, 1098 R Bayliss 2009, 1098 S 2007-2008, 1098 S Tricolore 2007-2008, 1198 2009-2010, 1198 R 2010.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Crank Shaft Bearing Kit built to meet OEM specifications.
Check Stock

Mountain Bike Crankset Square Taper 170mm Crank Set 48T Aluminum Alloy CNC Cycling Racing Bike Accessories with Crank for City Folding Bicycle Electric Bike

  • 【Duarable Material】These crank sets are made from high strength material, ensuring they are long-lasting, lightweight and handle the abusive ways of the trail. Featuring irregular teeth and chain pick-up pins for smooth and fast shifts. High strength steel and CNC aluminium to ensure longevity..
  • 【Compatible With】Crank Arm length: 170mm, Chainring（3/32" 48T)，compatible with 9/16" pedals, chain size 1/2"*3/32, total diameter of chain guard is 208mm (8.19in). Applicable for 20-26 inch folding bike. Please measure the size Check Frame chain stay clearance to confirm it fit your bike before you order..
  • 【New Design】Our crankset has high strength, can be used for a long time. Light weight design, adding no heaviness to you bike, make riding more comfortable and relaxing. Double alloy chainring cover, avoid chain rubbing riders pants, prefect for daily commuting..
  • 【Easy to Install】Adjustable crank bolt help you modify your bike quickly, and provides steel screws for free.When installing the crank, be sure to place the left crank on the right crank shaft, and then lock the two locking screws on the....
Check Stock

E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock

Fulton 142410 Dual Speed Winch - 2600 lbs. Capacity, 1 Pack

  • 2, 600 lb. Capacity two-speed winch one fast speed for quick pull-in, a second low speed for increased mechanical advantage 10 inch 'comfort grip' handle.
  • Shift lock design allows changing gears without moving the crank handle from shaft to shaft, just Lift the shift lock and slide the shaft into the desired gear position.
  • Neutral free-wheel position allows quick Line pay out without spinning the handle optional handbrake kit no. 501201 (sold separately) can be installed after the winch is mounted.
  • High-carbon Steel gears for superb strength and long-term durability stamped carbon Steel frame provides rigidity, important for gear alignment, and longer cycle life.
  • Designed for use with 2 inch straps up to 20 feet long.
Check Stock