Categories

Best Crankshaft Holding Tool

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12 - Month Warranty.
Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock

Cam Phaser Locking Tool and Crankshaft Positioning Tool Crankshaft Wrench Holder Fit for Ford 1993 4.2L/4.6L 2-valve,4.6L 4-valve 5.4L/6.8L V8 Similar to Rotunda 303-448,T93P-6303-A,6024&525219

  • FITMENT(Crankshaft Positioning Tool):1993 and newer 4.2L/4.6L 2-valve engines,4.6L 4-valve and 5.4L and 6.8L V-8 engines..
  • FITMENT(Cam Phaser Locking Tool):Expedition 5.4L 3V 2005-2011.
  • F-250/350/450/550 5.4L 3V 2005-2009.Mark LT 5.4L 3V 2006-2008.
  • Mountaineer 4.6L 3V 2006-2010.Mustang 4.6L 3V 2005-2010.
  • Navigator 5.4L 3V 2005-2012.Similar to Rotunda 303-448,6024,525219..
  • MATERIAL And DESIGN(Cam Phaser Locking Tool):Hardened chrome molybdenum steel,resistance on rust,deformation and crack.Designed with a triangle shape with four holes to perfectly fits for your cam phaser.It is a quite available accessory to make you do the phaser job with ease..
  • USAGE(Crankshaft Positioning Tool):This tool slides easily over the crankshaft and seamlessly locks into place with the Wood ruff key.You only need to rotate the crankshaft with tool attached to crank so that the slot in the handle locks into the engine cover alignment dowel pin,ensuring the engine is at the correct TDC point avoiding extreme damage and costly repairs..
  • CORRECT INSTALLATION POSITION(Crankshaft Positioning Tool):Easily installs over the crankshaft and engine front cover alignment dowel to position the crankshaft at top-dead-center..
Check Stock

Sunluway for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with Crank Bolts

  • GREAT FITMENT: Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7.
  • HIGH QUALITY: Made of high quality-42CrMo Steel, heavy duty and durable, surface coated with black paint to ensure resistance to corrosion and rust,....
  • NICE DESIGN: Designed to hold the crankshaft pulley while loosening or tightening the centre screw. Needn't to remove radiator or other components to....
  • USE SIMPLLY: To tighten crankshaft pulley by 2 screws (M8 x 1.25) Extend operation needs 1/2" Drive Wrench. Prevent the harmonic damper pulley from....
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Damper Pulley Holding Tool, simply return it for a full refund in 30 days,....
Check Stock

2009-2018 Subaru WRX STi Nitride Treated Hardened Crankshaft EJ257 2.5L 12200AA430 OEM GENUINE

  • 【Compatible】The crankshaft rear main seal & wear sleeve installer & remover tool kit compatible with Cummins ISX QSX ISX15 ISX12 diesel engines. Replaces OEM 3164780 3162994. Replace multiple seals including 4965569..
  • 【Features】Designed for easy removal and correct installation of the crankshaft rear seal and wear ring/sleeve on diesel engines..
  • 【Advantage】This crankshaft rear main seal & wear sleeve installer & remover tool kit helps reduce the risk of damage to the crankshaft seal surface during disassembly. In addition, the rear seal and wear ring will be automatically installed to the appropriate depth using this special tool 3164780 to prevent damage to the rear seal and leakage..
  • 【Quality】The crankshaft rear main seal & wear sleeve installer & remover tool kit is manufactured by an ISO-certified manufacturer, made of high-quality materials, and meets or exceeds OEM requirements. 100% factory tested, and durable..
  • 【Warranty】2 years warranty for the The upper gimbal steering arm shaft kit! When you have any questions about our products, please feel free to contact us, we will provide the best service..
Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
  • Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
  • Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..
Check Stock

Engine Crankshaft Turning Socket Tool, Aluminum, 1/2" Drive, Compatible with Chevy BBC Big Block 366 396 402 427 454

  • FITMENT - This BBC Crankshaft Socket Fits Chevy Cars with The Big Block Chevy Engines as below: 366 (6.0 L) 1960-1990,396 (6.5 L) 1965-1972, 402 (6.6 L) 1970-1972,427 (7.0 L) 1962-1963,454 (7.4 L) 1970-1976.
  • BENEFITS - Crankshaft Turning Sockets are a necessity for engine building. This socket slips onto the crank and will make turning your crank a snap,besides non- damaging aluminum tool will rotate the crankshaft in the correct way.
  • FEATURES - 1/2 Breaker Bar or Drive Ratchet for Rotating the Engine, fits 1. 610 ID crankshaft port with 3/16" keyway.
  • QUALITY - Corrosion-Resistant & Machined From 6061 Billet Aluminum.
  • INCLUDES - (1)BBC Crankshaft Socket Tool.
Check Stock

ACDelco Gold 710506 Crankshaft Front Oil Seal

  • Removal and installation tool for front crankshaft seal and wear sleeve on Cummins Signature, ISX & QSX，ISX12 and ISX15 engine.
  • Crankshaft rear seal remover and installer replace for OEM# 4918991 tool.
  • Fit for the newest Cummins seal and sleeve perfectly.
  • Remove and install front crankshaft seal easily and without damage.
  • Made of high quality steel and black finish.
Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

  • 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
  • Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
  • 【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
  • Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
  • Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

  • PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
  • A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
  • FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
  • Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
  • EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
  • After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
  • Continue tightening system into place with hand wrench (not included) and remove installer assembly.
  • CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
  • Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....
Check Stock

For Power stroke 6.7L Front and Rear Crankshaft Seal Installer Remover Master Set Fit for 2011-2021 Ford Super Duty Diesel F-250 F350 F-450 F-550 F-650 F-750 Alt to 303-1509 303-1514 303-1513 303-1510

  • Function -- This is a master tool set that can remove and install all the front and rear crankshaft seals. This professional tool set will absolutely save your time and energy to do the work. They are same or exceed the OEM function and quality..
  • Fitment -- Fits for 2011-2021 Ford Super Duty F-250 F-350 F-450 F550 equipped for Power Stroke Diesel 6.7L and 2016-2021 Ford Super Duty F-650 F-750 equipped for Power Stroke Diesel 6.7L..
  • Include -- 1 * 303-1509 & 303-1509-01 6.7L Front Crankshaft Seal Installer Tool Alt ST-137B. 1 * 303-1510 6.7L Front Crankshaft Seal Remover Alt ST-152. 1 * 303-1514 6.7L Rear Crankshaft Seal Installer Alt ST-138. 1 * 303-1513 6.7L Rear Crankshaft Seal Remover Alt ST-148..
  • Material -- Made of premium heavy-duty hard steel with black coated for rust and corrosion resistance, hardened construction for high strength and impact resistance, this tool is top quality and durability that can serve for a much longer time..
  • Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty..
Check Stock

Crankshaft Rear Main Seal and Wear Ring Installer Tool Replacement for Engine 4.5L 6.0L 6.4L Diesel Alt 303-770

  • Replacement for 4.5L Diesel - Low Cab Forward (2006-2009).
  • 6.0L Diesel - F650/750 Super Duty (2005-2007).
  • 6.4L Diesel - F250/350/450/550 Super Duty (2004-2010 & VT365 International).Installation instructions are not included.
  • OEM Replacement part # 303-770. ZTSE4515C ZTSE4515. Universal, used to install the Crankshaft Rear Seal Wear Ring for 4.5L, 6.0L, 6.4L Powerstroke and work in an easier way to save your time and money.
  • Material: All components made of high quality carbon steel, impact resiatant, excellent solid and durable.
  • Universal fits for installation of Crankshaft Rear Seal Wear Ring for 4.5L,6.0L,6.4L Powerstroke .This tool is needed to prevent your seal from leaking.Designed to eliminate lip flare on the wear sleeve and install the crankshaft rear seal wear ring on 4.5L, 6.0L & 6.4L powerstroke engine properly.
  • This rear main seal installer tool can help you install the crankshaft wear ring, rear seal and rear seal carrier effortlessly. The wear ring is automatically installed to the proper depth.
Check Stock