Best Creates Clean Bevels
WEN Band Saw with Stand, 10-Inch, 3.5-Amp, Two-Speed (BA3962),Black
- 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide.
- Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size.
- Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees.
- Operates at two speeds of either 1520 or 2620 FPM.
- Includes a 2-year warranty, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI).
Check StockWEN 14-Inch Two-Speed Band Saw with Stand and Worklight, Cast Aluminum Table
- 9.5-amp motor creates cuts up to 8.85 inches deep and 13-3/8 inches wide.
- Uses 100-3/4-inch blades anywhere from 1/8 to 1 inch wide.
- Spacious 21-1/2 x 15-3/4-inch work table bevels up to 45 degrees.
- Operates at two speeds of either 1480 or 3280 FPM.
- Includes a blade tension gauge, a circle cutting guide, a flexible work light, a 3-in-1 dust port, a fence, a 1/2-inch blade, and a miter gauge.
Check StockSet of 4, 6 and 8 inch Bevel Pro PVC Pipe Beveling Tool for All-Purpose Schedule 40/80 Pipes, Eliminates Hand Filing for Easy and Safer Bevels, ADP161 Adapter Required for use with Drills/Hole Hogs
- SAVES YOU TIME AND MONEY: By creating more consistent bevels in just 10 seconds, the Bevel Pro PVC Pipe Beveling Tool will improve safety, increase production and reduce trench time..
- NO MORE HAND FILING: Bevel Pro fits snugly over pipe ends to ensure precise bevels every time. It's designed to create bevels that form a smooth join to eliminate displaced or torn gaskets..
- QUICKER, SAFER OPTION: No more time-consuming hand filing or using powerful and dangerous tools in incorrect ways to get the bevels you need. Simply use Bevel Pro and in 10 seconds, the job is done..
- MADE IN THE USA: Bevel Pro PVC pipe beveling tools are made in the USA with durable and high-quality U.S. steel. These pipe bevelers can be easily sharpened multiple times to increase tool life..
- VERSATILE: Sized to match common pipe diameters, simply insert your Bevel Pro into a 1/2" or larger drill/grinder. A handy arbor adapter for gas-powered drills and hole hogs is available separately..
Check StockChef'sChoice Hone EdgeSelect Professional Electric Knife Sharpener for 20-Degree Edges Diamond Abrasives Precision Guides for, Straight and Serrated Knives Made in USA, 3-Stage, White
- SHARPENER with precision angle control guides that eliminate guesswork and ensure hair-splitting sharpness time after time.
- STAGE 1 and stage 2 form the first and second bevels of a durable, arch-shaped edge. Stage 3, a revolutionary flexible stropping disk creates an ultra sharp polished third bevel.
- DIAMONDS 100 percent diamond abrasives in stages 1 and 2.
- UNIQUE stropping and polishing in stage 3 for hairsplitting sharpness.
- WORKS for gourmet chef's knives, butcher knives, sporting knives, serrated knives, and pocket knives.
Check StockShopSeries RK7315 16\ Scroll Saw with Variable Speed Control
- Powerful, lightweight 1.2-amp scroll saw ideal for a variety of woodworking projects.
- Die-cast aluminum table bevels from 0 to 45 degrees.
- Includes two durable 5" tungsten carbide blades with a throat depth of 16" and a cutting depth of 2-1/2".
- Variable speed control and a 4/5" stroke ensure clean accurate cuts.
- 2 year limited warranty protects against defects in materials and workmanship.
Check StockJigSaw, 6.7Amp Power Jig Saws with LED Light,10 Blades, 800-3000 SPM Jig Saw, 6 Variable Speed, 0°-45° Bevel Cutting, 4 Orbital Sets, 3M AC Cord
- ...extra replaceable blades save you time and money..
- 【LED Light Guide & Dust Collection】Power Jig Saws features an integrated LED light for guiding your cutting line and enhancing visibility in the cutting area. Use with guide ruler to make cutting more accurate. Using the front dust blower or rear dust extraction creates a clean sight of cutting..
- 【4 Orbital Settings & 45°Bevel Precise Cutting】4 Position orbital, High gears deliver better efficiency, low gears deliver smoother cutting surface. Adjustable aluminum footplates make bevels up to 45° both to right and left for more versatile uses like a tangent, beveling, or curved cuts. Max cutting depth is 110mm/4.3inch for wood, 10mm/0.4inch for metal..
- 【Package List & Sincerely Service】ATTENTION: Place the base plate tightly to the material when cutting. The package comes with 10 x Replaceable Blades, 1x Scale Ruler, 1 x Rip Fence, 1 x Dust Exhaust Pipe, 1 x Allen wrench. If you have any questions, please contact us and we are here to solve your issues and provide quality service.^_^.
Check StockUtopz Clear Beveled Glass Jewelry Keepsake Box, Home Decor Vintage Glass Jewelry Display Organizer, Decorative Accent, 8.3'x 4.7'x 2.75'
- RAINBOW OF COLORS: The glass bevel's slanted edges refract light into a rainbow of colors!.
- FOR STAINED GLASS PROJECTS: Use glass bevels in your stained glass window, doors, suncatchers and other craft projects.
- BOX Of 30: 1 Inch Square Clear Glass Bevels.
Check StockSpyderco Manix 2 Lightweight Signature Folding Knife with 3.37 CTS BD1 Steel Blade and Translucent Blue FRCP Handle - PlainEdge - C101PBL2
- Ready for Anything - The Manix 2 is an extremely capable full-sized folder that is known for it's strength and performance. Its broad blade provides....
- Light and Durable - This Manix 2 handle is fabricated with Fiberglass Reinforced Co-Polymer. FRCP creates a tough, chemical and heat resistant handle....
- Dependable - If you are looking for control and precision, look no more. This knife features our PlainEdge grind which is known for creating a smooth....
- Low Friction - This knife features a blade ground with flat bevels that extend from the spine all the way to the cutting edge. This grind reduces drag....
- High-Strength Lock - The Ball Bearing Lock features a patented compressive lock that wedges a ball bearing between a fixed anvil and the blade tang.....
Check StockTSPROF Whole-Milled Fillet Clamps (2pcs)
- TSPROF Whole-milled fillet clamps are designed for clamping knives with a spine thickness up to 3.5 mm, suitable for K03 and Kadet Expert sharpening systems. The shape of the outer surface is radially convex, it allows you to set the minimum sharpening angles. The minimum sharpening angle is 7.2 degrees. The clamps are made of a single piece of aluminum, allowing you to adjust the clamp to any shape of the blade and ensure the symmetry of the installation..
- Thanks to the two gripping points, the deflection of the blade is impossible. It is possible to move the clamps independently, along the entire length of the frame. There is no need for calibration. With these clamps, it becomes possible to sharpen knives with "Scandinavian bevels" along the line of bevels..
Check StockSpyderco Ladybug 3 Salt Lightweight Folding Knife with 1.93
- LADYBUG 3 - Spyderco Ladybugs come in a diverse collection of handle and blade materials. Our Ladybugs have a common denominator: they're small, innocuous, cut like the devil, carry well on a keychain and become a tool for everyday life..
- FRN HANDLE - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles..
- HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or only a portion of its width..
- PLAINEDGE - A sharpened knife blade with no serrations or teeth sometimes referred to as a smooth blade..
- SPECIFICATIONS - Closed Length (Inches): 2.48, Overall Length (Inches): 4.41, Blade Length (Inches):1.93, Blade Steel: H-1, Grind: Hollow.
Check StockSpyderco Atlantic Salt Lightweight Folding Knife with 3.68
- SALT SERIES - The Salt Series tackles rust through the groundbreaking use of nitrogen-based blade steels like H-1 and LC200N. The result is a diverse selection of knives that are incredibly resistant to corrosion..
- FRN HANDLE - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles..
- HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or only a portion of its width..
- SPYDEREDGE BLADE - Spyderco's two-step serration patterns consisting of one large and two small serrations. The pattern increases the cutting edge's surface area by up to 24%..
- SPECIFICATIONS - Closed Length (Inches): 4.59, Overall Length (Inches): 8.27, Blade Length (Inches):3.68, Blade Steel: H-1, Grind: Hollow.
Check StockDEWALT Jig Saw, Top Handle, 5.5-Amp, Corded (DW317K)
- Keyless, lever-action blade clamp for quick and easy blade changes of the jigsaw tool.
- 5.5 amp motor of the jig saw deliver powerful cuts in the hardest materials.
- Variable speed delivers 0 - 3,100 strokes per minute for optimal cutting speed.
- 4-position orbital action provides control of cut quality and speed.
- All-metal gear case provides superior durability on a professional site.
- Shoe bevels 0 degree to 45 degree for beveled cuts.
- Keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft.
- 5.5 Amp motor deliver powerful cuts in the hardest materials.
- variable speed delivers 0 - 3,100 strokes per minute for optimal cutting speed.
- 4-position orbital action allows for faster, more aggressive cuts in a variety of materials.
Check StockOneway Wolverine Grinding Jig with Quad Setup Jig for Sharpening Workshop Tools • Woodturning Gouges • Chisels • Scrapers • Skews and Wood Carving Tools
- The Oneway Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Owning the Wolverine Grinding Jig will ultimately save you time, frustration and money..
- The included Quad Setup Jig helps you correctly set the proper grinding angles for Roughing Gouges at 45 deg, Parting Tools at 30-60 deg, Skews at 21.5-43 deg and Bowl Scrapers at 8 deg. Its called the “Quad Setting Jig” since one jig sets the correct angles for all 4 of the other HSS woodturning lathe tools. The Quad Setting Jig is designed to be used with 8” bench grinders..
- Carpenter chisels up to 1-1/4" wide can be sharpened using the Wolverine's Vee-Arm. The arm is adjusted to set the bevel, and the chisel can be ground with small sideways motions and light cutting pressure. Three or four strokes on a strop will generate a razor sharp edge. The Wolverine Grinding Jig comes wi....
Check Stock