Forney 72732 Wire Cup Brush, Fine Crimped with 1/4-Inch Hex Shank, 3-Inch-by-.008-Inch
- Crimped Wire cup brush, fine, 1/4Hex shank,.
- Designed for easy access into narrow holes and confined areas.
- Crimped style for light to medium duty applications.
- Removes rust, scale and paint in hard to reach areas.
- Works with any power drill or pneumatic air drill.
Check StockMEASUREMAN 2-1/2 dial 1/4 NPT Lower Glycerin Filled Stainless Steel case Brass Inside 30inHg/-100kpa-0
- For measuring the vacuum of gas, air, suitable for vacuum pump, vacuum tank or other vacuum system.
- 304 stainless steel case and crimped ring, polycarbonate window, brass inside and connection,.
Check StockTwidec/Wire Crimping Pliers 2.8/4.8/6.3 mm Spade 26-16AMG Crimping Tools Manual Crimp Fold Tool for Open Barrel Terminals SN-48B
- ...ing the roulette to ensure uniform crimping each time.Heavy Duty Full-Cycle ratcheting terminal crimper with labor saving system help to a easier operation.The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp..
- Emergency release device:Make sure that the terminal is crimped into place so that the crimped terminal and wire are securely and securely combined. The crimping operation can be terminated and the terminal can be exited in the event of a misoperation.Pressure adjustment knob:When crimping terminals of different sizes, if the wires cannot be pressed, loosen the screws, adjust the knob, + to increase the pressure, - to reduce the pressure..
- The handle is made of soft rubber and designed in ergonomic lever structure, which can increase friction and help you use less effort when crimping.
Check Stock
Makita 1 Piece - 4 Inch Crimped Wire Wheel Brush For Grinders - Light-Duty Conditioning For Metal - 4' x 5/8-Inch | 11 UNC
- ✅ 1 MAKITA Premium Light-Duty Crimped Wire Wheel Brush for Metal Conditioning | 4" x 5/8-Inch - 11 UNC Standard Thread - 0.012" Thick Wire | Engineered for use on Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
- ✅ CONDITION UP TO 3X Longer than lower quality or low priced brushes due to Makita’s carefully selected Premium Carbon Steel bound and balanced expertly & proprietarily together for unsurpassed crimped integrity for LONGER LIFE, SAFETY, SMOOTHNESS and EASE of use than other wire wheels in its class.
- ✅ EASILY & SMOOTHLY Remove Light corrosion, rust & paint with superior flexibility and wire fatigue-resistance on RESTRICTED surface areas with minimal metal scratch risk | Makita’s Crimped Wire Wheel Brush is gentle on metal and made from top quality .012" tempered carbon steel wire that reveal a soft, pliable and paint-ready surface.
- ✅ AVOID INJURY & Premature Wear with lower priced brushes by relying on Makita’s carefully balanced Wire diameter, density, length and bonded wire integrity for superior reliability, long life, safety, smoothness and ease of use than competitor wires that fly apart and prematurely tear, resulting in injury and project delays | For best results, apply g....
Check StockMakita 2 Piece - 4 Inch Crimped & Twist Wire Wheel Brush Set for 4.5 Grinders - Complete Conditioning for Metal - 4 x 5/8-Inch | 11 UNC
- ✅ 2 Piece MAKITA Premium Threaded Crimped & Twist Wire Wheel Brushes for End-to-End Metal Conditioning | 1 KNOTTED BRUSH + 1 CRIMPED BRUSH | 4" x....
- ✅ CONDITION UP TO 4X Longer than lower quality or low priced brushes due to Makita’s carefully selected Premium Carbon Steel, bound & balanced....
- ✅ EASILY AND SMOOTHLY remove light to heavy corrosion, rust, paint, spatter and scale removal while also clean weld edges, debur metal and....
- ✅ AVOID INJURY & Premature Wear with lower priced brushes by relying on Makita’s carefully balanced Wire diameter, density, length and bonded....
- ✅ Complete End-to-End Metal Conditioning in restricted surface areas, the Light-Duty CRIMPED Wheel brush removes light corrosion, rust and paint....
Check StockFast Recovery Diode Module Full Crimped Structure MBRP400200CT 200A 25V -55~150℃ Rectifier Diode Module
- FULL CRIMPED STRUCTURE: The diode module has full crimped structure with excellent temperature characteristics and power cycling capability.
- AIR-COOLED AND WATER COOLING: The full crimped recovery diode block below 200A are forced air-cooled, modules above 300A are selected for air-cooled and water cooling.
- STABLE PERFORMANCE: High quality of the diode recovery module can provide stable performance. Simple installation, easy to use and maintain.
- AC 2500V: The recovery diode module is easy to use, the chip is electrically insulated from the backplane, 2500V AC voltage.
- SPECIFICATION: Forward Average Current IF (AV): 200A.
- One-cycle Forward Non-repetitive Surge Voltage IFSM: 25V.
Check StockAIRIC 12-10 AWG Ring Terminal 1/4 inch Gold Plated Crimp Ring Terminals with Soft Boots Gold Wire Connectors Kit 12-Pack
- SIZE: 12-10 gauge wire connectors 1/4" ring hole, 12 PCS (6 positives, 6 negative).
- GOLD Plated Finish: Heavy-duty and gold plating surface for maximum conductivity.
- PREMIUM Ring Terminals: Gold ring terminals are well made with brazed seam craft, which keeps its durability, security, and beauty.
- COLORED Soft Boot: Insulated wire ring terminals come with red and black soft boot, which will protect the crimped wire end and identify the polarity easily.
- WIDE Usage: As it's perform well in anti-shock and corrosion resistance, these crimp ring connectors widely used in car, battery, audio system, etc. It will easily connect your battery to your system's amplifier with these high-quality ring terminals..
Check StockPreformed Tubular Coin Wrappers, Quarters, 10, 1000 Wrappers/Box
- Preformed tubular paper coin wrappers. One end crimped for easy filling..
Check StockMEASUREMAN 2-1/2\ dial, 1/4\NPT Lower, Glycerin Filled, Stainless Steel case, Brass Inside, 30inHg/-100kpa-0-30psi/200kpa
- For measuring the compound of gas, air, suitable for measuring of both pressure and vacuum at the same equipment or system.
- 304 stainless steel case and crimped ring, polycarbonate window, brass inside and connection,.
Check StockAIRIC 12-10 Gauge Ring Terminal 5/16 inch Gold Plated Crimp Ring Terminals with Soft Boots Gold Wire Connectors Kit 12-Pack
- SIZE: 12-10 gauge wire connectors 5/16" ring hole, 12 PCS (6 positives, 6 negative).
- GOLD Plated Finish: Heavy-duty and gold plating surface for maximum conductivity.
- PREMIUM Ring Terminals: Gold ring terminals are well made with brazed seam craft, which keeps its durability, security, and beauty.
- COLORED Soft Boot: Insulated wire ring terminals come with red and black soft boot, which will protect the crimped wire end and identify the polarity easily.
- WIDE Usage: As it's perform well in anti-shock and corrosion resistance, these crimp ring connectors widely used in car, battery, audio system, etc. It will easily connect your battery to your system's amplifier with these high-quality ring terminals..
Check StockFrankford Arsenal Platinum Series Hand Deprimer Tool for Standard Primer Removal for Reloading – 909283
- INNOVATIVE: The patented Universal Collet System deprimes brass from .20 cal up to .338 Lapua.
- EASE OF USE: Features an easily removable spent primer catch tube and an assisted-ejection case holder for easy removal of deprimed cases. The handle is spring loaded to return the collet deprimer to the start position automatically.
- VERSATILITY: Works on pistol brass, rifle brass and military crimped primers.
- CONVENIENT: Deprime a significant amount of brass, from anywhere, and without hand fatigue.
- DURABLE: Constructed with a full-length, ergonomic grip.
Check StockWeiler 17978 3" Stem-Mounted Crimped Wire Radial Wheel.008" Stainless Steel Fill, 1/4" Stem, Made in the USA (Pack of 10)
- CONTROLLED BRUSHING ACTION: Feature side plates for a shorter trim length and more controlled brushing action in a stem-mounted crimped wire wheel.
- CONSISTENT PERFORMANCE: Provides a flexible brushing action and consistent performance for demanding light-duty cleaning and deburring applications on steel.
- APPLICATION: Crimped wire wheels with a permanently-attached 1/4 in stem or shank are primarily intended for use on high speed die grinders.
- SOLID RING CONSTRUCTION: Featuring Weiler's solid ring construction, these radial wheels are available in heat-treated steel, type 302 stainless steel and brass wire.
- SPECIFICATIONS: 3 Inches Stem-Mounted Crimped Wire Radial Wheel, .008 Inches Stainless Steel Fill, 1/4 Inches Stem, 13/16 inches Trim Length, 1/2 inches Face Width, Max RPM 20,000 , Made in the USA.
Check StockCentury Drill and Tool 76221 Coarse Drill Cup Wire Brush, 2-3/4-Inch
- Wire brushes are used to remove rust paint and weld spatter on all types of metal parts or surfaces.
- Deburr and clean the inside and outside of pipes valves and other fittings.
Check Stock
