Kreg KMA4700-E Straight Edge Guide XL-8 Ft

  • Crosscut and rip cut material up to 8 feet (244cm).
  • Aluminum guide rail leads cuts precisely along a straight line.
  • Cutline indicators help position cuts perfectly.
Check Stock

Kreg KMA4100 Crosscut Station

  • Crosscut up to 12" wide (305mm) and make a variety of miter cuts from 0° to 45°.
  • MDF base and backboard act as sacrificial surface for splinter-free cutting.
  • A kerf line you cut into the MDF base shows exactly where your saw will cut.
Check Stock

Kreg Straight Edge Guide-4 Ft

  • Crosscut and rip cut up to 4 feet (122cm) in sheet goods.
  • Aluminum guide rail leads cuts precisely along a straight line.
  • Cutline indicators help position cuts perfectly.
  • Built-in clamping with GripMaxx secures rail to material.
  • Works with left- and right-blade circular saws, as well as some jigsaws and trim routers.
Check Stock

Kobalt 3 in 1 folding saw

  • ideal capacity for moulding and framing cuts.
  • Light weight due to compact die-cast aluminum construction-easy to move from storage to jobsite.
  • Vertically mounted laser guide projects accurate pre-cutting line for precise alignment.
  • Positive miter and bevel stops for accurate placement of most used angles.
  • Dual slide rail system with linear bearings allows for smooth and accurate operation.
Check Stock

TonGass DIY Crosscut Sled Kit for Table Saw - 2*UHMW Runner Bars 2* Aluminum Tracks 1* Knob & Bolt Set 8* Flat Heat Screws

  • Safety is our priority - This DIY table saw crosscut sled hardware kit will make crosscutting safer and more convenient. Avoid risking your limb when....
  • 13 PIECES CROSSCUT SLED HARDWARE - includes 2 pieces of 19” x 3/4” x 3/8” UHMW runner bars, 2 pieces of 12 inches aluminum mini tracks, 1 set....
  • PRE-CUT AND COMPLETE SET FOR YOUR CONVENIENCE - All the components of this kit are cut and designed specifically for the building of a crosscut sled.....
  • Please take note: The UHMW runners included in this kit will only fit standard 3/4-inch and 3/8-inch track slots and will not fit the Ryobi table saw....
  • FREE HOW TO BUILD A CROSSCUT SLED GUIDE BOOKLET - Follow to a tee or use as a guide, our easy-to-understand guide is perfect for all skill levels.....
Check Stock

Kobalt 7-1/4-in Sliding Compound Miter Saw

  • ideal capacity for moulding and framing cuts.
  • Light weight due to compact die-cast aluminum construction-easy to move from storage to jobsite.
  • Vertically mounted laser guide projects accurate pre-cutting line for precise alignment.
  • Positive miter and bevel stops for accurate placement of most used angles.
  • Dual slide rail system with linear bearings allows for smooth and accurate operation.
Check Stock

Velodi 2 PCS 6302-2RS Replacement Ball Bearing for DeWalt DW708 DW716 DW717 DW718 DWS780 Miter Saw# N127530

  • Compatible with: DeWALT: DW706 Type 1 12 Dual Bevel Miter Saw, DW708 Type 1 Crosscut Miter Saw, DW708 Type 3 Crosscut Miter Saw, DW708 Type 4 Crosscut....
  • Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings..
  • Double Seal Effectively Saves Grease and Prevent Impurities From Entering..
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock

BOSCH GCM18V-12SDN PROFACTOR 18V Surgeon 12 In. Dual-Bevel Slide Miter Saw (Bare Tool)

  • SURGEON PROFACTOR PERFORMANCE: For a truly mobile jobsite solution, this saw provides light weight and pro capacity.
  • LARGE CUTTING CAPACITY: Features a cut capacity of 3.5 In. depth and a 14 In. width/crosscut.
  • SHADOW LED CUTLINE: Provides an accurate guide to quickly line up precise cuts without the need for a tool to adjust.
  • DUAL-BEVEL DESIGN: Allows for large compound cuts to either side of the workpiece.
  • BEVEL DETENTS: Features an easy-to-read scale with detents at common angles.
Check Stock

INCRA Build-It T-Slot Panel Connector 18-inch

  • The Incra Build-It Modular Jig &Fixture System is a highly versatile collection of jig and fixture "building blocks".
  • Simply connect the parts with a screwdriver and the included fasteners to produce in minutes what used to take hours or even days.
  • From tenoning jigs and crosscut sleds for your table saw to coping sleds for your router table.
  • You can build the perfect jig in minutes with INCRA’s new Build-It System.
  • Shooter boards, crosscut boxes, tenoning or tapering jigs and everything in between, the possibilities are endless.
Check Stock

DIY Crosscut Table Saw Sled Kit with Specific Guide Booklet to build your own crosscut sled for More Accurate and Safer in Saw Working, pack of 1

  • (Attention: The UHMW bars are not in 3/4″ by 3/8″ size)DIY your own crosscut sled – You may build your own unique sled to fit your table saw.
  • Make your desired crosscut sled size and meet your unique cutting requirements..
  • Accurate & Safe – Great improve cutting accuracy and make saw operations safer, and steady the work piece while shielding your finger from harm..
  • Quality Kit – UHMW bar is the most often used material in crosscut sled runners and it does not flex under sudden temperature changes and slides more smoothly as there is less friction.
  • The aluminum T track is solid extruded and can be trimmed to match your sled. (ATTENTION: The bars Do Not fit RYOBI table saw track slots).
  • Fun of DIY – Not only can you create your own unique table saw sled but also you can enjoy the processing of DIY, more motivated and confident in the following saw working..
  • Package Included – 2 UHMW bars, 2 T tracks, 1 star knob and bolt, wood secrets of varying lengths, and 1 specific guide booklet (glue and other building materials are not included).
  • Backs its products within 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

DIY Crosscut Table Saw Sled Kit with a Specific Guide Booklet to Build Your Own Tablesaw for More Accurate and Safer Saw Working, Table Saw Accessories, Pack of 1

  • ... table saw sled for your need, but also lies in the sense of accomplishment and creativity it brings, being more motivated and confident in the following saw working when you use it..
  • Vary Size – You may build your own unique sled to fit your table saw.
  • Make your desired crosscut sled size and meet your unique cutting requirements..
  • Table Saw Accessories - 3/4'' x 3/8'' UHMW bar is the often used material in crosscut sled runners which fits most table saw and will not expand under sudden temperature changes as well as slick enough to slide smoothly.
  • The aluminum t track is solid extruded and can be trimmed to match your sled.
  • (ATTENTION: The bars DO NOT fit RYOBI table saw track slots).
  • Package Included – Crosscut table saw sled accessories (2 UHMW bars (3/4'' by 3/8'' ), 2 T tracks, 1 star knob and bolt, wood screws of varying lengths) and 1 specific guide booklet (glue and other building materials are not included).
  • Backs its products within 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4" x 3/8").

  • Kit Contains: Our crosscut sled kits come in Red-3/4"x3/8"x36" 2pcs. white-3/4"x3/8"x19"+1feet T-track primary color, 2pcs. white-3/4"x3/8"x24"2pcs. white-3/4"x3/8"x36"2pcs. white-3/4"x3/8"x48" 2pcs. Make your crosscut sled to the size you want or need for your table saw and cutting requirements..
  • High Quality Material: UHMW Polymer (plastic) is a linear polyethylene material with a molecular weight ranging from 3,000,000 to 6,000,000. Furthermore, because UHMW is ten times heavier than regular high density polyethylene, it is extremely durable for constant repetitive use..
  • Smooth&No Residue: Because UHMW bars produce less friction than wood, they are commonly used as runners for crosscut sleds. Another benefit is that UHMW does not expand or contract like wood during extreme weather changes. Each bar measures about 3/4" x 3/8" and fits most standard table saw slots. UHMW bars are also slick and will not leave any residue, dust, or shavings behind, as do wooden bars..
  • Outstanding Impact Strength: Even at low temperatures, jigs, fix....
Check Stock