Categories

Best Crosscut Saws

Gyokucho Ryoba Double Edge Razor Saw Long 240mm Model 650 Blade with New TPE Grip

  • Rip TPI: 7, uses the same blade as the model 650.
  • Made in Japan with durable long lasting Japanese steel. The blade is impulse hardened for extreme sharpness and long life, then coated for corrosion....
  • Japanese style pull saws are easier to use, and cut very straight and precise lines as compared to push saws.
  • Adjustable pivot point. There is a joint located in between the blade and blade’s tang that permits the blade and handle to be angled to facilitate....
  • Brand new TPE grip provides a solid no slip surface in all conditions.
Check Stock

Weaver Curved Saw Scabbard 27 With Snap Hook, Black

  • JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
  • UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
  • RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
  • RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
Check Stock

Kreg Straight Edge Guide-4 Ft

  • Crosscut and rip cut up to 4 feet (122cm) in sheet goods.
  • Aluminum guide rail leads cuts precisely along a straight line.
  • Cutline indicators help position cuts perfectly.
  • Built-in clamping with GripMaxx secures rail to material.
  • Works with left- and right-blade circular saws, as well as some jigsaws and trim routers.
Check Stock

Woodworking Project Paper Plan to Build 8' Arched Lawn Bridge

  • Build your own crosscut station with lumber rack with this paper plan.
  • Woodcraft is America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

Table Saw Small Parts Crosscut Sled - Table Saw Sled Kit Includes Blade Guard Miter Track Stop – 900 Angle Small Moldings Crosscut Saw - Table Saw Sled Features Zero-Clearance Support

  • Crosscut Sled For Table Saw: This miniature cross cut sled lets you use your table saw to cut small parts to length. Our sled includes a miter track....
  • Great for cutting: Our crosscut sled is great for cutting dowels, tenon stock, and small moldings at a precise 90° angle, with little to no tear-out..
  • Zero-Clearance Support: This sled system features zero-clearance support, which reduces the chance of small pieces getting stuck between the blade and....
  • Extremely Durable: Our aluminum table saw sled is ideal for constant repetitive use. This zero clearance table saw insert does not absorb moisture and....
  • Fits Most Table Saws: A small plastic ramp on one side of the kerf carries the drop-off piece away from the blade. The rear-mounted blade guard is....
Check Stock

Gyokucho Razorsaw Ryoba Saw 240mm No 610 with Replaceable Blade

  • Gyokucho Razorsaws feature blades filled with remarkably sharp teeth of incredible durability.
  • however, the teeth cannot be sharpened, so all saws....
  • Adjustable pivot point. There is a joint located in between the blade and blade’s tang that permits the blade and handle to be angled to facilitate....
  • All blades are coated with the latest in anti-corrosion technology products. Even a little corrosion can reduce performance by increasing friction and....
  • Rattan wrapped handle. Besides being the traditional style grip, rattan grips actually ensure a good grip in all conditions, including sweaty hands,....
Check Stock

KAKURI Azebiki Japanese Saw for Woodworking 3-1/2" Made in JAPAN, Japanese Curved Hand Pull Saw for Hole, Mid Panel, Groove Cutting, Ryoba Double Edge Blade for Rip & Crosscut

  • ...DE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
  • RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
  • RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
Check Stock

\Freud 12\\\ x 80T Thin Kerf Fine Finish Crosscut Blade (LU88R012)\

  • Industrial Thin Kerf Fine Finish Crosscut Saw Blade.
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw Right Side Dubby Sled

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles....
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the....
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate....
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp....
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the....
Check Stock

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

  • If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process..
  • Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!.
  • UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavi....
Check Stock

SawStop TSA-SA48 Sliding Crosscut Table Attachment

  • This sliding table is built for versatility. Micro-adjust for detail cuts, and crosscut full sheets with the 55" travel and 48" crosscut capacity..
  • The fence is at least 15% larger than typical crosscut sliders, spanning 43" and extending past 58"..
  • Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time..
Check Stock

TonGass DIY Crosscut Sled Kit for Table Saw - 2*UHMW Runner Bars 2* Aluminum Tracks 1* Knob & Bolt Set 8* Flat Heat Screws

  • Safety is our priority - This DIY table saw crosscut sled hardware kit will make crosscutting safer and more convenient. Avoid risking your limb when....
  • 13 PIECES CROSSCUT SLED HARDWARE - includes 2 pieces of 19” x 3/4” x 3/8” UHMW runner bars, 2 pieces of 12 inches aluminum mini tracks, 1 set....
  • PRE-CUT AND COMPLETE SET FOR YOUR CONVENIENCE - All the components of this kit are cut and designed specifically for the building of a crosscut sled.....
  • Please take note: The UHMW runners included in this kit will only fit standard 3/4-inch and 3/8-inch track slots and will not fit the Ryobi table saw....
  • FREE HOW TO BUILD A CROSSCUT SLED GUIDE BOOKLET - Follow to a tee or use as a guide, our easy-to-understand guide is perfect for all skill levels.....
Check Stock

Rockler 24 Aluminum Miter Bar - Aluminum Bar for Smooth-Sliding Action on Table Saws Router Tables Workbenches & More – For any Standard 3/4 x 3/8 Miter Slot – Accessories for Table Saw

  • 24" Aluminum Miter Bar: The Rockler miter track bar allows you to set up your jigs for smooth-sliding action on table saws, router tables, bandsaws,....
  • Adjustment Screws: This solid aluminum miter bar has nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4" x....
  • Great For? Our miter slider bar is great for shop-made crosscut jigs, cutoff tables, taper jigs, and more. Available individually in 18", 24", and 36"....
  • Easy Assemble: Our miter bar slider makes it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues. This....
  • Extremely Durable: Our miter bars for the table saw are made of high-quality aluminum alloy that will be strong and reliable for several years..
Check Stock