Best Crossover For Car Audio 2

Orion Ztreet 4 Channel Car Amplifier – Class A/B Stereo Power Amplifier 2500 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

• ...plifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
• Quality - This Class A/B 4 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
• Power – This Class A/B 2500 Watts Car Amplifier has a power rating distribution as followed 280x4 RMS @2 Ohms, 50x4 RMS @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
• Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
• Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 4 channel car amplifier provides you with options of high pass crossover of 50Hz....

Precision Power SPL 4 Channel Car Amplifier – Class A/B Multichannel Amplifier 2000 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply for Car Speakers Sub Amp

• Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 15-20KHZ, THD: < .05%, Bass Boost, SNR: 105DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and Input Sensitivity: 200mV-6V.
• Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
• Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
• Power – This Class A/B 2000 Watt Car Amplifier has a power rating distribution as followed 250x4 @2 Ohms, 180x4 @4 Ohms, 500x2 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
• Crossovers- The SPL Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of variable 60-1.2kHz 12db high pass crossover, variable 50-400Hz 12db low pass crossover ....

Blaupunkt AMP1500M High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote

• High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote Car Audio Mono-channel Amplifier / Amplifier Class: AB.
• Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz -....
• Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V.
• Crossover Frequency: 40Hz - 250Hz / Crossover Slope (dB/oct): 12dB/oct.

Precision Power E.7 1/2 DIN 7-Band Parametric Equalizer with LED Display

• QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
• 1 Ohm Stable - This SPL Audio Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively..
• Features – The monoblock bass boost amplifier has features like - Frequency Response: 15~150HZ, Bass Boost, SNR: >105DB, Remote Bass Knob, 2-way protection, Input Sensitivity: 200mV to 6V and THD:.
• Power – This Class D 3000 Watt Amplifier has a power rating distribution as followed 1500 X 1 @ 1 OHM, 1000 X 1 @ 2 OHMS, 700 X 1 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
• Crossovers- The SPL Monoblock Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The monoblock car amplifier provides you with options of variable 50-400hz 12db low pass crossover, variable 17-50hz 12db subsonic crossover, ....

Douk Audio 2Pcs 400W Speaker Frequency Divider 2 Way 2 Unit Hi-Fi Soundshelf Crossover Filters Woofer and Tweeter

200W Pure Bass Subwoofer Crossover Second-Order Crossover Frequency Distributor Divider 2 Way Speaker Audio Crossover Filter

• Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
• Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
• Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
• 2-Way Crossover Filters Frequency Distributor.

Rockville CAR-EQ-Oke Car Audio 7 Band Equalizer w Bluetooth + Mic Input Karaoke

• Features: Rockville CAR-EQ-OKE 1/2 Din 7 Band Car Audio Equalizer EQ w/ Microphone Input, Echo and Bluetooth, Bluetooth audio streaming from any smartphone or other Bluetooth-enabled device.
• 7 adjustable bands of equalization (50Hz, 125Hz, 315Hz, 750Hz, 2. 2KHz, 6KHz and 12KHz), Each band is adjustable from -12dB to +12dB, Built in crossover, Subwoofer level controls.
• Includes mounting brackets and screws for easy installation, Amazing quality with low distortion (Built with top quality components), Frequency response: 20Hz TO 20KHz +/- 1dB, S/N Ratio: 95 dB, Crossover Roll-Off: 12dB per octave.
• Input impedance: 10K, Input sensitivity: 200mv per channel >7V, THD: 0. 01%, Input: 12V, Output: 12V, Power requirement: 11-16V DC, Unit dimensions in inches: 7. 08 x 5. 51 1. 26.
• 7. 315 Hz control (+ or = 12 dB), 8. 750 Hz control (+ or = 12 dB), 9. 2. 2 KHz control (+ or = 12 dB), 10. 6 KHz control (+ or = 12 dB), 11. 12 KHz control (+ or = 12 dB), 12. Microphone volume control, 13. Microphone echo control.

Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's Bundle with Hifonics ZG-2400.1D ZEUS Gamma 2400 Watt Mono Amplifier Car Audio Class D Amp

• ... minimal distortion. RCA Inputs: Nickel plated high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant..
• High Level Inputs: Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power. Operation Mode: Mono only. Crossover Type: Onboard electronic crossover. Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Class/Topology: Class D, High efficiency with big power in a small footprint..
• Output Device Technology: "PWM MOSFET Power Supply, Stable power through the PC board with minimal heat generation. Heat Sink: Aluminum, Old School Hifonics Heat sink for Superior Heat Dissipation. Power Supply: Simpatico Coil Design,The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices. Output Connections: RCA Outputs, Daisy chain multiple amplifier to eliminate additional signal cables from the source unit..
• Connection Type: Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile. LED System Protection Circuitry Diagnostics: Mo....

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

• ... followed 350x4 @2 Ohms, 175x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
• Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
• Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
• Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
• RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease as you just have to bring one set into the first amp and then use the line out rca....

Pair Memphis Audio PRX570C 5x7' Component+PRX57 5x7' Car Audio Coaxial Speakers

• Package Includes: (1) Memphis Audio PRX570C 5x7" or 6x8" 100 Watt Component Car Speakers w/Crossovers. (1) Pair of Memphis Audio PRX57 5x7" or 6x8" 80w Car Speakers w/Pivot Tweeters 5x7/5"x7". Features: Memphis Audio PRX570C 5x7" or 6x8" 100 Watt Component Car Speakers w/Crossovers.
• Polypropylene cone. Butyl rubber surround. Separate poly dome tweeter. Separate crossover. Perfect for OEM factory applications. Stealthy black-on-black M-Cone design. Specifications: Size (in): 5X7". RMS Power (w): 50. Peak Power: 100. Sensitivity (dB): 89. Mounting Depth (in): 2.125.
• Magnet Size (oz): 10. Warranty: 1. Grill included: N. Features: (2) Memphis Audio PRX57 5x7" or 6x8" 80w Car Speakers w/Pivot Tweeters 5x7/5"x7". Polyurethane surround. PEI dome tweeter. Multi-direction pivot tweeter system. Stealthy black-on-black M-Cone design. Specifications: Size (in): 5X7".
• RMS Power (w): 40. Peak Power: 80. Sensitivity (dB): 88. Mounting Depth (in): 2.25. Magnet Size (oz): 10. Warranty: 1. Grill included: N.

DS18 TWPZ Piezo Super 80 Watts Micro Dome Tweeter - Set of 2

• Perfect sound available together with your woofers, these tweeters have a built-in Crossover, Micro dome inside, no magnetic field, and work with all car audio systems.
• Sensitivity: 101 decibels, frequency response: 3.5 - 20Khz, Crossover frequency: 5, 000 hertz.
• High-powered tweeter delivers 80 watts of power.
• Accessories included: 2 angle mounts, 2 surface mounts, 2 regular angle mounts, 6 mounting screws, 2-self-adhesive disk.

CT Sounds Meso 25mm 100 Watt Flush-Mount Premium Silk-Dome Tweeters, Pair

• Speaker type: tweeters for car audio, Impedance per speaker: 4 Ohm, Power per tweeter: 25W RMS | 50W MAX, Power per tweeter set: 50W RMS | 100W MAX.
• 25 mm silk-dome tweeters that feature a CCAW voice coil and neo magnet which allow the car tweeters to recreate vocals and other high frequencies like never heard before.
• Custom engineered 1 inch tweeters that feature a voice coil suspended in ferrofluid which provide an accurate reproduction of your favorite tracks.
• The tweeters for car audio are housed in a brushed aluminum flush mount bracket to keep your ride looking sharp.
• Included: (2) 25 mm silk-dome tweeters, (2) ABS crossover boxes, (2) tweeter connecting wires.

Taramp's Five-Way Electronic Car Audio Crossover System,Black,CRX5

• Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
• Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
• Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
• Pure Bass Subwoofer Second-order Crossover Frequency Divider.