Categories

Best Crossover Frequency For Subwoofer

Monoprice 6.5in and Ribbon Tweeter 2-Way Bookshelf Speakers (Pair) Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

(2) JBL JRX215 1000w 15" DJ P/A Speakers+(2) 18" 1400w Subwoofers+Powered Mixer

  • ... Effects/14 XDR2 Mic Pres. : JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil.
  • JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles.
  • 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 250 W / 1000W. Frequency Range (-10 dB) : 41 Hz - 18 kHz. Frequency Response (3 dB) : 59 Hz - 13 kHz. Sensitivity (1w/1m) : 99 dB SPL. Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50.
  • Crossover Frequency : 2.2 kHz Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in). Weight : 27.4 kg (60.....
Check Stock

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

150W Frequency Divider 4~8 Ohm Ajustable Treble/Bass 2-Way Speaker Audio Crossover Filter for Subwoofer HiFi Speaker Home Car Audio Set DIY (2700Hz)

  • Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
  • Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
  • Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
  • Pure Bass Subwoofer Second-order Crossover Frequency Divider.
Check Stock

Powered Subwoofer, BESTISAN Home Audio Bluetooth Subwoofer, Deep Base, Built-in Amplifier Wireless Home Theater Subwoofer for TV, Soundbar, Optical/RCA/Bluetooth (6.5 Inch, Black)

  • CONVENIENT, LED DISPLAY DESIGN- round corner design can prevent bruising and perfectly integrate with your room. led displays in different colors shows mode switching..
  • WIRELESS& WIRED SEAMLESS STREAMING- Included RCA, optical and Bluetooth allow Bestisan powered subwoofer to blend the subwoofer’s low-frequency tones with other speakers, soundbar, smart phone, tv, laptop, tablet, etc..
  • LOW RESONANCE CABINET & BLUETOOTH 5.0-The latest Bluetooth 5.0 chip and compact design effectively reduces resonance interference and unwanted noises, so all you can hear is the cleanest and purest sound..
  • 6.5″ HOME THEATER POWERED SUBWOOFER- The 6.5″powered subwoofer features continuously variable 60-250hz crossover and 40-250 hz frequency response, designed for audio and home theater performance..
  • ADJUSTABLE VOLUME AND LOW-FREQUENCY- Independent volume and low-frequency bandwidth adjustment knob located on the back panel of the subwoofer allows you to adjust the volume and low-frequency bandwidth according to your preference..
Check Stock

200W Pure Bass Subwoofer Crossover Second-Order Crossover Frequency Distributor Divider 2 Way Speaker Audio Crossover Filter

  • Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
  • Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
  • Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
  • 2-Way Crossover Filters Frequency Distributor.
Check Stock

Monoprice Above Fireplace Height Adjustable Swivel TV Pull Down Mantel Wall Mount for LCD LED Plasma Screen Displays 40 Inch to 63 Inch, Maximum weight 70lbs

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Precision Power SPL 4 Channel Car Amplifier – Class A/B Multichannel Amplifier 2000 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply for Car Speakers Sub Amp

  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 15-20KHZ, THD: < .05%, Bass Boost, SNR: 105DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and Input Sensitivity: 200mV-6V.
  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2000 Watt Car Amplifier has a power rating distribution as followed 250x4 @2 Ohms, 180x4 @4 Ohms, 500x2 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Crossovers- The SPL Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of variable 60-1.2kHz 12db high pass crossover, variable 50-400Hz 12db low pass crossover ....
Check Stock

Clarion MCD360 2/3-Way 6-Channel Electronic Crossover w/ 5-Volt RCA Outputs + Subwoofer Equalizer

  • 6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer).
  • Front/Rear/Subwoofer Lever Control - Subwoofer Equalizer and Boost Level Controls.
  • High-Pass Crossover Frequency Multiplier.
  • Remote Subwoofer Level Control (Included) -Gold Plated Terminals.
Check Stock

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

  • ... followed 350x4 @2 Ohms, 175x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
  • Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease as you just have to bring one set into the first amp and then use the line out rca....
Check Stock

Boss Up (feat. Teddythelegacy) [Explicit]

  • ...o strap two OX4.600 amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Fixed High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” in all size speakers including mid ranges and tweeters.
  • Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Specs - Dimensions: 16.22” x 6.89” x 2.22”, Weight: 7.32 lbs., Speaker Impedance: 2 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 90 dB, Frequency Response: 10 Hz to 30 kHz, Fuse Quantity: 2 35 Amp ATO Blade.
Check Stock

Insignia 15' Subwoofer Cable - Black/Purple - Model: NS-HZ5342

  • SLIM HOME THEATER POWERED SUBWOOFER - Standard RCA inputs easily connect to your home theater receivers dedicated Subwoofer Output. Save power with the added Signal Sensing Auto ON/OFF feature, slim 4.75" height fits under or behind most furniture.
  • 250 WATTS PEAK POWER - Integrated high efficiency power amplifier, 35 - 150 Hz at 8ohm with 24dB per Octave Crossover, Auto ON/OFF and 0 - 180 degree Phase control switches, Gain and 40 - 150 Hz Crossover control knobs.
  • 8 INCH DOWN FIRING WOOFER - High efficiency Low Frequency woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet design with vibration absorbing feet, high quality MDF with added internal bracing and black ash finish.
  • SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with dual or single RCA dedicated Subwoofer passive output, home receiver or stereo with raw wire outputs. Use for home theater and surround sound systems.
  • WHAT'S IN THE BOX - Theater Solutions by SUB8S powered subwoofer, 6 foot dual RCA cable, RCA "Y" adapter, stand mounts, wall mount with hardware, instruction manual - Standing sub with feet size is (H x W x D) 4.75" × 25" × 16" - NOT LFE Compatible.
Check Stock

AudioControl DQDX Black 6 Channel Performance Digital Signal Processor

  • Six input and output channels with level controls | Independent Front, Rear, and Subwoofer equalization | Fully adjustable 24dB / Octave Linkwitz-Riley selectable crossover.
  • ACR-3 Dash Control Remote Included | Discrete Input and Output level controls with clipping indicators | 12-volt Remote Turn On Output | Built in Pink Noise for easy Signal Delay and Equalizer tuning and system set-up.
  • Total Harmonic Distortion: 0.01% | Frequency Response: 10Hz-22kHz | Equalizer Frequencies (front/rear): 125Hz, 175Hz, 250Hz, 500Hz, 1kHz, 2kHz, 8kHz | Equalizer Frequencies (sub): 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100HZ, 125Hz.
  • PFM Frequency: 20Hz or 30Hz selectable | Crossover Frequency: 50Hz-500Hz selectable | Signal Delay Max (Left/Right): 10ms | Signal Delay Max (Front/Sub): 35ms.
Check Stock