Categories

Best Crowfoot Wrenches

WORKPRO 3/8\ Drive Crowfoot Wrench Set, 10-piece Flare Nut Wrench Set, Metric 10-19mm, Steel Wrench With Storage Rail, Easily Access Hard-To-Reach Areas

  • High-Quality Crowfoot Wrench Set: Made of Chrome Alloy, these wrenches are more solid, durable, and corrosion-resistant..
  • 10 Pcs Common Metric Size: Metric sizes for 3/8" drive flare nut wrenches include 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm. Each wrench is engraved with dimensions for easy identification..
  • Convenient Storage: The secure storage rail contains 10 spring buckles, and each crowfoot wrench is buckled on the spring buckle. This design is very suitable for storage and taking..
  • Usage: WORKPRO crowfoot flare nut wrench set speeds up installation and removal. It fits perfectly on 3/8” drive ratchet, extension rod, or torque wrench. With easier access to fasteners in narrow spaces, 10 sizes meet more of your needs and make your job easier..
  • Wide Application: The set is very suitable for working on oil-circuit machinery. It is also suitable for lawn equipment, car automotive & truck work in tight engine/radiator areas & controls arms or for underneath sink/toilet work..
Check Stock

Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs

  • Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines..
  • Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance..
  • Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire..
  • Warranty: We offer 30 days and 365 days free replacement warranty..
Check Stock

Martin BC8K 8 Piece , 12 Piont , Flare Nut Crowfoot Wrenches , 5/8\ 1 1/16\

  • 8 piece 12 point flare nut crowfoot wrenches 5/8" 1 1/16" clip rail.
  • Flare nut crowfoot ideal for Restricted areas.
  • Martin Tool is a Division of market SPROCKET made in the USA.
  • Package dimensions: 9.5" L x 3.44" W x 1.19" H.
Check Stock

NEIKO 03325A ½” Drive Jumbo Crowfoot Wrench Set | 14 Piece | SAE | 1-1/16” to 2” | Cr-Mo Steel

  • [PRO QUALITY]: This professional grade set includes 14 high quality 1/2 inch jumbo crowfoot flare nut wrenches ranging in size from 1-1/16” to 2” for all your home and automotive jobs..
  • [DURABLE]: This wrench set is made of durable, industrial grade, heat-treated, drop forged chrome molybdenum alloy steel that won’t easily break nor rust to promote long-lasting service life..
  • [VERSATILE]: These open-end sockets are ideal for diesel and automotive maintenance in any car or truck garage and can be used with any 1/2" drive ratchet, extension or torque wrench to reach tight, narrow spaces or deep recesses where 6- and 12-point sockets just won’t fit..
  • [INCLUDES]: 14 jumbo sizes for 1/2" drive crowfoot wrenches ranging in size including 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1- 1/2", 1-5/8", 1-11/16", 1-3/4", 1-13/16", 1-7/8", and 2”..
  • [CONVENIENCE]: Includes a hard plastic blow-molded case for convenient storage and organization along with clearly marked identification on each wrench..
Check Stock

TEKTON 1/2 Inch Drive Jumbo Crowfoot Wrench Set, 14-Piece (1-1/16-2 in.) | 2585

  • Includes 14-pc. 1/2 in. drive crowfoot wrenches: 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, 2 in..
  • Reaches fasteners in tight spaces that other wrenches cannot.
  • Use with any 1/2 in. drive ratchet, extension, or torque wrench.
  • Made from forged and hardened alloy steel.
Check Stock

VCT 10 Pc 3/8' Drive Fully Polished Metric Flare Nut Crowfoot Wrench Set

  • 3/8 in. Drive Crowfoot Flare Nut Wrench Set includes 10 pieces of all sizes between 10mm and 22mm--the most common sizes used for automotive repair. Each wrench is made with drop forged alloy steel and designed with an open side and a 15-degree offset at each end. This set comes mounted on a storage rail for convenient transport and storage..
  • Includes 10 Crowfoot Flare Nut Wrenches from 10, 11, 13, 14, 15, 16, 17, 18, 19, 22mm.
  • Open side at each end allows for easy access over lines and tubing while still providing 5 sides for a maximum on fasteners.
  • 15-degree offset provides clearance for your fingers and other obstructions near the fastener.
  • Drop forged alloy steel material provides strength and comfort.
Check Stock

ARES 33005 – 1/4-Inch Drive Spring Loaded Auto Adjusting Crowfoot Wrench – Adjustable Wrench with 5 to 11mm (3/16-Inch to 7/16-Inch) Coverage – Male and Female Square Drives for Increased Versatility

  • DESIGN: This auto adjusting crowfoot wrench is the perfect solution to your search for the right tool in the middle of the job. With spring loaded adjustable jaws that quickly adjust to fit the exact size needed and ratchet with each turn, this tool has enough coverage to replace wrenches ranging from 5 to 11mm (3/16-inch to 7/16-inch). Now you can tackle dozens of different jobs with this single tool..
  • QUALITY: Our crowfoot wrench’s adapter body and jaws are finished with manganese phosphate and chrome plated finishes, providing your tool with increased durability and protection against wear, tear, rust, and corrosion. Thanks to the wrench jaws’ serrated toothed design and heavy duty chrome vanadium steel construction, you can approach any job with confidence knowing your wrench will not slip or stick in use..
  • APPLICATIONS: Thanks to its male and female square drive ends, you can use this wrench flexibly with a wider variety of ratchets and extensions for added leverage and control. Whether you’re working on tie rod removal, plumbing jobs, or loosening and tightening hex nuts and bolts, this auto-adjusting crowfoot wrench has you covered on a wide variety of applications..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tool....
Check Stock

Orion Motor Tech Crowfoot Wrench Set for 8 to 24 mm Flare Nuts, Crowfoot Flare Nut Tool Kit, 15 Piece Large & Small Metric Wrench Set for 3/8\ and 1/2\ Drives Ratchets Extenders for Nut Removal

  • 15 PIECE WRENCH SET: This metric crowfoot wrench set includes 15 flare nut wrenches to specifically reach and manipulate flare nuts on hard-to-reach areas of larger-sized cars, trucks, dozers, tractors.
  • VERSATILE APPLICATION: These multipurpose adjustable wrenches easily remove flare nuts of 15 sizes from 8 mm (5/16 in.) to 24 mm (15/16 in.), working with your torque wrenches to satisfy various vehicle servicing needs.
  • RUGGED CONSTRUCTION: These mechanic repair tools are made from heavy duty structural Cr-Mo steel for reliable strength and durability.
  • the flare nut wrenches are further coated to resist wear, tear, and corrosion under even punishing use.
  • EASY OPERATION: Our flare nut wrenches work well with your 3/8" or 1/2" ratchets, extenders, torque wrenches, or flare nut wrenches to service your machinery quickly and easily.
  • the included blow-molded case provides organized storage for easy transport.
  • 1 YEAR WARRANTY: Orion Motor Tech backs this flare nut tool kit with a strong 1 year warranty and our usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your vehicles for years to come!.
Check Stock

Powerbuilt 10 Piece 3/8 Inch Drive SAE and Metric Crowfoot Wrench Set, Turn 3/8 inch Ratchet to Open Ended Ratcheting Wrench 6480380

  • DURABLE WITH A LONG LIFE: Constructed from premium Chrome Vanadium steel.
  • chrome plated mirror finish for durability.
  • WORK FASTER AND EASIER: Crowfoot wrench set turns any 3/8 inch ratchet into an open ended ratcheting wrench.
  • no need to remove and reseat the wrench between turns.
  • WIDE COVERAGE: Wrench set includes both SAE and Metric wrenches in the most common sizes.
  • 7/16 inch, ½ inch, 9/16 inch, 5/8 inch, 3/4 inch, 10mm, 13mm, 15mm, 16mm, 18mm.
  • PRECISION CONSTRUCTION: Meets or exceeds ANSI standards.
  • Convert any 3/8-Inch drive ratchet or bar into an open end wrench.
  • SAE wrenches include 7/16, 1/2, 9/16, 5/8, 3/4-Inch.
  • Metric wrenches include 10mm, 13mm, 15mm, 16mm, 18mm.
  • Meets or exceeds ANSI standards. Lifetime warranty.
Check Stock

17pc GRIP Metric Jumbo Crow Foot Wrenches Set Crowfoot 20-46mm Open End MM 90152

  • 17pc GRIP Metric Jumbo Crow Foot Wrenches Set Crowfoot 20-46mm Open End MM 90152.
Check Stock

GEARWRENCH 10 Pc. 3/8' Drive Crowfoot Wrench Set, Metric - 81909

  • Crowfoot wrenches provide greater access to hard-to-reach fasteners and fittings.
  • Open end wrench works on fasteners when there are height restrictions.
  • Bright, full polish chrome finish wipes easily clean and resists rust and corrosion.
Check Stock

Apeixoto Oxygen Sensor Removers 5PCS Oxygen Sensor Sockets with Packing Case Oxygen Sensor Socket Set Removal Tool

  • Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum switches and fuel injections. These tools can be used most vehicles..
  • Package: The package includes 5pcs sockets and wrenches included in the red case.The whole tool set comes in a solid red case which will protect the tools well during shipping and let you keep the tools well after usage..
  • Specifications: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: The Apeixoto oxygen sensor removers and oil Pressure Sending Units are constructed with heat-treated chrome vanadium steel. It is totally rust and corrostion resistant. The surface has a black powder and it looks much more shinny..
  • Warranty: 100% satisfaction. If you come across any issue or need any assists during usage, we are here to help..
Check Stock

VEVOR Inner Tie Rod Tool Kit, 13 Pcs Tie Rod Removal Tool, 13 Pcs Crowfoot Adapters Inner Tie Rod Tool Set, 1/2 Inch Drive Tube Tie Rods Tool, Heavy-Duty Steel Inner Tie Rod Removal Tool for Vehicle

  • ...ned for secure and effectual removal of the inner rod. The inner rod can be easily removed and installed without removing the rack and pinion. Applicable to most domestic and imported vehicles, including cars, pickups, and off-road vehicles..Fit Type: Universal Fit.
  • 12 Pcs Crowfoot Adapters: This tie rod kit Includes 12 sizes of crowfoot-style adapters: 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/ 16", 1-1/2" and 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, 42 mm. To get all your work done quickly and efficiently..
  • Ultra Durable Rod: Our tie rod drawing tools and adapters are all-steel forged and used for a long time. The flexible sliding collar on the sleeve's top can tightly fix the crowd feet adapters. It is compatible with 1/2" drive wrenches and helps you get the parts that ordinary wrenches cannot install.
  • its knurled handle allows you to firm control at any time..
  • Hassle-Free Operation: The entire operation is effortless. Step 1: Slide the adapter on the plane of the lever. Step 2: Rotate the collar to fix the fishtail joint in place. Step 3: Use a 1/2 inch ratchet or impact wrench to th....
Check Stock