Best Csa certified Conduit Elbows
Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 1/2-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1/2\ Dia
- Use with Sealproof straight or right angle connectors.
- can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
- Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
- outdoor, sunlight resistant, direct burial..
- Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
- Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
- UL Listed Underwriter's Laboratories File No. E-129973.
- UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check StockSealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 3/4-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 3/4\ Dia
- Made in USA. Use with Sealproof straight or right angle connectors.
- can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
- Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
- outdoor, sunlight resistant, direct burial..
- Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
- Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
- UL Listed Underwriter's Laboratories File No. E-129973.
- UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check StockRoll of Natural Gas Pipe Marker,135 Labels in a roll, With liner, Self adhesive stickers you peel and stick, 8\ perforated, 2\ x 8\ wide, Good for gas inspection
- Electrical joint compound for proper connection between metal parts.
- Oxide-inhibiting compound for preventing galvanic corrosion and enhancing connection in electrical joints.
- For aluminum to aluminum, aluminum to copper, and aluminum to conduit applications.
- Remains workable when stored in dry environment under 100 degrees F.
- UL listed to 600 V, CSA certified, and RoHS compliant.
Check StockEastman 48378 Stainless Steel Braided Washing Machine Hoses with 90 Degree Elbow 3/4 inch FHT 6 Ft 2 Pack 6 Pair
- ✅BURST PROOF- Constructed of a heavy-duty PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 braided....
- ✅UNIVERSAL- Each braided washing machine hose measures 6 feet in length. Equipped with brass nuts that are nickel-plated with stainless steel....
- ✅COMPLETE- The washing machine hoses are equipped with 3/4 inch Female Hose Thread (FHT) x 3/4 inch Female Hose Thread (FHT) connections..
- ✅SAFETY and QUALITY- Features a working temperature of 15-degrees Fahrenheit to 158-degrees Fahrenheit. For residential use only. CSA certified and....
- ✅INSTALLATION- Equipped with 90-degree elbows for strain relief and easy installation in tight places..
Check StockHalex, 1 in. Electrical Metallic Tube (EMT) 2-Hole Strap , 61610B, 50 per pack
- Secures EMT conduit to wood, masonry or other similar surfaces where load bearing is required.
- Corrosion resistant for indoor or outdoor use.
Check StockLamson E943E-CAR Carlon Male Adapter
- Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
- Performance: Flammability classification 94V-2.
- Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
- Application: Suitable for indoor/outdoor usage.
Check StockSigma Electric ProConnex TC-501 EMT Set Screw Connector 1/2-Inch, 50-Pack
- Terminates 1/2-in EMT conduit to a 1/2-in knockout in an outlet box or enclosure.
- Concrete-tight when taped and for dry location applications.
Check StockGreen THHN Wire | 10 AWG - 50 Feet | Solid Copper Grounding Wire, Proudly Made in America | Ground Protection Satellite Dish Off-Air TV Signal - UV Jacketed Antenna Electrical Shock
- ...s high heat and moisture resistant - 10 AWG THHN PVC jacket - Indoor and Outdoor rated (600 V and 90 C/194 F).
- EQUIPMENT ADAPTABILITY: Approved for major CATV and satellite providers including Comcast (Xfinity) DirecTV, Dish Network, Charter, Spectrum, Cox Cable TV & Verizon FIOS.
- QUALITY ASSURANCE: UL Listed and CSA certified - and Proudly manufactured in the the United States | Includes a US manufacturers warrantyDescriptionb>Introducing the Indoor / Outdoor UV jacketed Copper THHN Wire by The CIMPLE CO.
- This high quality and heavy duty electrical wire can be used in conjunction with other grounding supplies to protect against lighting strikes and power surges. The center conductor is made of high grade Solid Copper (SC). The use of solid-copper allows for very low voltage drop along the center conductor over long runs, and offer great grounding properties. Multi-Purpose building wire is a great wire, that has many uses - including cable trays, conduit, servcie, feeders, and branches. Works in Industrial, Commercial, and Residential applications..
- COMMON NAMES: Building Wire THHN / THWN Conductor for: NM-B, UF-B, SER, SEU, and MC Ground or Grounding Wire Annealed / Soft Copper Solid Copper Wire.
- FEATURES: UL listed : Commercial / Industrial / R....
Check StockFuzbaxy10pcs1/2\ NPT Nonmetallic Liquid Tight Straight Connector,180 Degree Electrical Conduit Connector Fitting
- Terminates 1/2-in EMT conduit to a 1/2-in knockout in an outlet box or enclosure.
- Concrete-tight when taped and for dry location applications.
Check Stock1 Inch 90 Degree Nonmetallic Liquid Tight Electrical Conduit Conector Fitting, 4 Pack, UL Listed
- Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
- Performance: Flammability classification 94V-2.
- Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
- Application: Suitable for indoor/outdoor usage.
Check StockHigh-k Gate Dielectrics for CMOS Technology
- Boots for hazardous materials handling. Exceeds CSA standards for Di-Electric footwear. Steel toe, steel shank and steel midsole for complete protection..
- NFPA 1991, 2016 edition compliant ASTM F2413-18, CAN/CSA Z195-12.
- Specially formulated PVC allow protects you from some of the worst chemicals around while exceeding CSA standards for Di-Electric footwear.
- Steel toe, steel midsole and steel shank Ultra grip Sipe outsole provides superior, slip resistance and protection.
- Certified by S. E. I. to meet the requirements of NFPA 1991 Standard on Vapor-protective ensembles for Hazardous materials emergencies, Flash Fire certified.
Check StockLittle Giant WCR-9SS 115 Volt, 4/10 HP, 4800 GPH Sewage / Effluent / Wastewater Collection and Removal System, Steel Cover, Green / Blue, 509082
- SEWAGE/EFFLUENT SYSTEM: contains 20"x30" basin, steel lid, sewage pump with float switch, PVC discharge piping and elbows, check valve, gromets, adaptors, and PVC elbows (assembly required).
- LITTLE GIANT 9SC-CIA-RF SEWAGE PUMP INCLUDED: 115-Volt, 60 Hz, 4/10 HP continuous duty permanent split capacitor (PSC) motor.
- AUTOMATIC OPERATION: equipped with a piggyback mechanical float switch.
- actives when liquid reaches between 9 and 14 inches.
- shuts off when liquid falls to between 2 and 6 inches.
Check Stock5.11 Men's ATAC 2.0 8\ Arid Tactical Military Boots, Style 12417, Coyote, 4 Regular
- Boots for hazardous materials handling. Exceeds CSA standards for Di-Electric footwear. Steel toe, steel shank and steel midsole for complete protection..
- NFPA 1991, 2016 edition compliant ASTM F2413-18, CAN/CSA Z195-10.
- Specially formulated PVC allow protects you from some of the worst chemicals arounds while exceeding CSA standards for Di-Electric footwear.
- Steel toe, steel midsole and steel shank Ultragrip Sipe outsole provides superior, slip resistance and protection.
- Certified by S. E. I. to meet the requirements of NFPA 1991 Standard on Vapor-protective ensembles for Hazardous materials emergencies, Flash Fire certified.
Check Stock