AUSTOR 0.8mm Lead Free Solder Wire with Rosin Core

  • Melting point range: 215°C - 220°C (419°F – 428°F), recommended point: 217°C(422.6°F).
Check Stock

Image Dynamics IDMAX12 D2 V4 12" Dual 2-Ohm Coil Subwoofer 1000 Watts RMS

  • 12" Dual 4 ohm ID MAX V.4 Series Subwoofer | Pressed paper composite cone woofer | Parabolic EPDM rubber surround | Over 2" long linear excursion | RaDiaToR cooling system for heat dissipation | Radiant Diametric Torsional Reinforcement | High compliance suspension design | Flat spider with NOMEX cloth woven tinsel leads | High-temperature flat wire, flat wound voice coil | Inverted dust cap with logo | Powder coated alloy proprietary basket.
  • Power Handling: RMS: 1200 watts | Recommended Power Range: 300-1200 watts | 3-1/2" peak-to-peak surround excursion.
  • Nominal Impedance (IMP): Dual 4 Ω | DC Resistance (Re): 3.0 Ω | Resonance Frequency (Fs): 27.77 Hz | Equivalent Volume (Vas): 72.16 L | Electrical Q Factor (Qes): 0.73 | Mechanical Q Factor (Qms): 2.98 | Total Q Factor (Qts): 0.58.
  • Frequency response: 20-250 Hz | Peak Excursion (Xmax): 39 mm | Force Factor (BL): 16.68 Tm | Piston Area (Sd): 545.0 cm2 | Sensitivity: 85.20 dB 1w/1m.
  • Sealed Enclosure Suggestion: 1 cu.ft. | Ported Enclosure Suggestion: 1.75 cu.ft. | Displacement: 0.14 cu.ft. | Mounting Depth: 8.15 in | Outside Diameter: 12.40 in | Cutout: 11.02 in.
Check Stock

Haier WD-5100-23 Wool Pad (Lint Filter) 2 piece, Exhause Filter + Air Intake Lint Filter

  • Haier Genuie Spare Parts: Thin and Strong, good ventilation and fast drying, preventing the growth of bacteria.
  • Part number: WD-5100-23 Wool Pad (Lint Filter).
  • for Haier dryer HLP140E 2.6 cu. ft. / HLP141E 2.6 cu. ft. ect..
  • Package Includes: 1 x Exhaust Lint Filter.
  • Long-lasting, extending the lifespan of your appliance.
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

Guaranteed for Life, NEMA 14-50 Commercial / Industrial Grade U.L. Approved 50 AMP 240V Receptacle

  • NEMA 14-50 High Grade, Commercial / Industrial Grade, OUTLET, FLUSH MOUNT, STRAIGHT BLADE, 250 VOLT, AU/CU APPROVED, Full Sized Copper Alloy Contact Points. Heavy Duty..
  • Dielectric Voltage withstand: 2000VAC/1min, Constructed with Premium High-Impact Resistant Thermoplastic Materials (PA6),.
  • Blades are Heavy-Gauge, Double-wipe Copper Alloy, and Rational Structure Design, ensures Superior Strength and Durability.
  • Standard Rating from UL498, CSA C22.2, #42.
Check Stock

TEMCo TH0410 Rotary Cable Stripper Kit for THHN / XHHW 6 Gauge to 750 MCM (Compatible with any drill)

  • Cable Stripper will strip THHN / XHHW cable from 6 gauge to 750 MCM with varying insulation thickness..
  • Wire stripper can be used with any drill or cordless drill..
  • Includes bushings for 6awg CU/AL, 4awg CU/AL, 3awg CU, 2awg CU/AL, 1awg CU, 1/0 CU / 2/0 AL, 2/0 CU / 3/0 AL, 3/0 CU, 3/0 CU / 4/0 AL, 4/0 CU, 4/0-250MCM CU / 250MCM AL, 250MCM CU / 300MCM AL, 250-300MCM CU / 300MCM AL, 300MCM CU / 350MCM AL, 350MCM CU / 400MCM AL, 350-400MCM CU / 400MCM AL, 350-400MCM CU, 500MCM AL, 500MCM CU, 500MCM CU / 600MCM AL, 500-600MCM CU / 600MCM AL, 600MCM CU, 600MCM CU / 700MCM AL, 600-700MCM CU / 750MCM AL, 700MCM CU, 750MCM CU / 900MCM AL.
  • Each die has adjustable depth for changing insulation thickness.
  • Stripper can be adjusted to strip lengths up to 4” depending upon application..
Check Stock

Kotobukiya 'Love, Chunibyo and Other Delusions Cu-Poche Rikka Takanashi Figure

  • Display Rikka with or without her eye patch and use other interchangeable face parts to create several expressions.
  • Rikka comes with accessories and parts to allow for the creation of different poses, such as alternate hands, umbrella props, or even weapons.
  • Rikka features multiple points of articulation and magnets in her feet for extra stability on the included base.
  • Display alone or alongside other Cu-Poche figures from Kotobukiya!.
Check Stock

Partol Carburetor Carb 2 Barrel Compatible with Ford Mustang F150 F250 F350 Comet Engine 289 Cu, 302 Cu, 351 Cu Wagoneer 360 Cu - Automatic Choke

  • Compatible with Ford Mustang 1968~1973 Engine 289 Cu, 302 Cu, 351 Cu / Ford F150 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu / Ford F250 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu / Ford F350 1964~1979 Engine 289 Cu, 302 Cu, 351 Cu / Ford Comet 1964~1982 Engine 289 Cu, 302 Cu, 351 Cu / Wagoneer 1964~1978 Engine 360 Cu.
  • Improve throttle response for better engine performance. Mounting gasket & seal included.
  • Add More Horse Power While Maintaining Near Stock Fuel Mileage Directly Replace the Old / Broken One.
  • Improve throttle response for better engine performance, add 5~10% horsepower and maintain near stock fuel mileage.
  • Part Number: 2100,A800. Package: 1x car carburetor..
Check Stock

GELUOXI Carburetor Two 2 Barrel Carburetor Carb 2100 2150 Compatible with Fo rd F100 F250 F350 Mus-tang Mer-cury 289 302 351 Cu Engine,Compatible with J-e-e-p Engine with Electric Choke

  • carburater Part Number: 2100A800 / 2100-A800. Package include: 1*Carburetor. 1*Mounting gasket. 1*Seal. All our accessories are professionally tested at the factory. Please make sure the project is suitable for your model before purchasing..
  • Compatible with: Fo-rd Mu-stang Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1968-1973.
  • Fo-rd F100 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978, Fo-rd F250 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978.
  • Je-ep Wa-goneer SJ Engine 360 cu in (5.9 L) V8 1964-1978..
  • Compatible with: 1964-1978 Je-ep Wa-goneer 360 Cu 5.9L.
  • 1968-1973 Fo-rd Mus-tang 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1978 Fo-rd 100 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1978 Fo-rd F250 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1979 Fo-rd F350 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1982 Mer-cury Comet 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L..
  • Compatible with: Fo-rd F100/F250/F350 with 289 302 may also know as 2-Barrel Carburetor, F250 Carburetor, F350 Carburetor, F100 Carburetor, 289 Carburetor, 302 Carburetor, 351 Carburetor, 351 Carburetor 2 barrel, 2100 carburetor, 2150 carburetor, 2100 Carb, 2bbl carburetor, 302 carb,carburetor 2 barrel f100, 2100 A800 carburetor..
Check Stock

2 Barrel Carburetor Carb 2100 A800 2150 for Ford 289 302 351 Cu Jeep Engine F150 F250 F350 with Electric Choke Mounting Gasket - 302 Carburetor / 351 Carburetor 2-Barrel / 2150 Carb

  • Compatible with: Jeep Wagoneer 1964-1978 with 360 Cu Engine, for Ford Comet 1964-1982 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L), for Ford F350 1964-1979 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L).
  • Carburetor Fit for Ford Mustang Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1968-1973,for Ford F100 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978,for Ford F250 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978.
  • Part Number: 2100 A800, 2100-A800, 2100A800.
Check Stock

2 Barrel Carburetor Carb 2100 A800 2150 for Ford 289 302 351 Cu Jeep Engine F150 F250 F350 with Electric Choke Mounting Gasket - 302 Carburetor, 351 Carburetor 2-Barrel, 2150 Carb by Yolik

  • 2-Barrel Carburetor for Ford F100/F250/F350 with 289 302 351 Cu Engine,for Jeep Wagoneer 1964-1978 with 360 Cu Engine.
  • 2100 Carburetor Fit for Ford Mustang Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1968-1973,for Ford F100 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978,for Ford F250 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978..
  • 2150 Carburetor Fit for Ford F350 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1979,for Ford Comet Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1982,for Jeep Wagoneer SJ Engine 360 cu in (5.9 L) V8 1964-1978.
  • Part Number: 2100 A800. Package Contents: 1 Carburetor with mounting gasket and seal..
  • Must be Run with a Fuel Filter before inlet 1.08 Venturi .049 Jets. Add More Horse Power While Maintaining Near Stock Fuel Mileage Directly Replace the Old/Broken One.
Check Stock

Taixin Taixinhyd Air Hydraulic Pump 10,000 PSI 10 Ton Porta Power Hydraulic Air Foot Pump Control Lift with Air Line Lubricator

  • Taxinxinhyd Air Hydraulic Pump: AIR PRESSURE IS 108-120 PSI, Max. Hydraulic Pressure is 10000PSI, Usable Oil Capacity is 42cu.in(690cu.cm), Air Inlet Size: 1/4 NPT Femal, Oil Port Size: 1/4 NPT.
  • Swivel Coupling Simplifies Hydraulic Connection And Pump Operation, Operates In All Directions For Increased Versatility In Use And Mounting.
  • Air Line Lubricator: Taixinhyd Air Hydraulic Pump has Air Line Lubricator with Quick Connect Coupler, EXTEND this AIR HYDRAULIC FOOT PUMP service lifetime and performance..
  • Durable Rugged Construction Parts Built For Long Life And Easy Operation, Fits All Standard And Long Ram Hydraulic..
  • Replaces Air Or Hydraulic Pump On Most Porta Powers.
Check Stock

MOSTPLUS 2100-A800 Carburetor 2 Barrel Carb Compatible for Ford F100 F250 F350 MUSTANG Engine 289 302 351 JEEP Engine 360

  • Fitment★MOSTPLUS Carburetor Compatible for Jeep Wagoneer 1964~1978 Engine 360 Cu.
  • Compatible for Ford Mustang 1968~1973 Engine 289 Cu, 302 Cu, 351 Cu.
  • Compatible for Ford F100 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu.
  • Compatible for Ford F250 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu.
  • Compatible for Ford F350 1964~1979 Engine 289 Cu, 302 Cu, 351 Cu.
  • Compatible for Ford Comet 1964~1982 Engine 289 Cu, 302 Cu, 351 Cu..
  • Exact OEM Numbers★ 2100 A800 ,the accessories are as shown in our pictures. exact match to the OEM,same performance to original.
  • Easy replacement★Installation is easy, took several minutes can be used it.
  • Premium Quality★MOSTPLUS Carburetors is use for special enrichment device instead of a choke to starting.it is make the bore of the carburetor unobstructed for greatest air flow.Easy warm-ups and starting by adjusting the lever.
  • Warm tips★Please clean up the oil channels and air filters as well as use the clean fuel before installing the carburetors whether if the oil channels of carburetors will be blocked.
Check Stock