Categories

Best Current Circuit Break

EPLZON 150A Circuit Breaker Resettable Circuit Breaker 150 amp Self Recovery Circuit Breaker Manual Reset Button for Car Audio and Amps Protection

  • Features: Large current thermal trip circuit breaker with manual reset switch, suitable for auxiliary DC electrical system, when the current reaches a predetermined value, the fuse can be restored to automatically disconnect and protect the circuit.
  • Circuit protection function: When the current reaches a predetermined value, the recoverable fuse will automatically disconnect to protect the circuit. Prevent excessive current and protect electrical appliances. Overcurrent protection, overvoltage protection, residual current protection, overcharge protection..
  • Simple installation: No need to replace the built-in fuse, and it can also be used as an on/off button battery switch. The circuit breaker has simple installation steps and can be installed on any flat panel, or on the wall or in the car..
  • Material and wiring: The shell and parts are made of highly flame-retardant and anti-vibration plastics, with a long service life. It accepts 0/2/4/8 specification power cords with adapters for direct connection with all 12, 24 volt systems.
  • Application: Provide protection for overload or shor....
Check Stock

KKnoon Circuit Breaker Finder - Multifunction Network Cable Tester for CAT5/CAT6,Ethernet Cable Tester with Multimeter,Poe Circuit Tester,Test Fault Distance Location and Length Measurement

  • ...smission distance.16-20VP-P super strong signal to cable tracer.You can set the frequency, and three modes can be switched freely..
  • 【Multimeter】The breaker finder with all in one multimeter with DC AC Voltmeter and Ohm Volt Amp Tester.
  • Circuit tester measures voltage , Current.K-type probe to measure temperature 20-1000℃,AC Voltage, Current testing range 4-400V,1.0A-10A.NCV power display and diode testing..
  • 【Poe testing & Hub Blink】The K618 network cable tester can identify pins that are providing power and detect how much voltage, Locate network port by the flashing port light (blink every 1 second) on Hub and Switch. Available to 500M Hub/ switch. The measurement area includes circuit tracer, short circuit test, break-point identification and etc..
  • 【What Includes】Cable length maesure available 2-core metal wires: CAT5/CAT6 network cable, telephone cable, coaxial video cable.Our cable testers containtransmissor, receiver, alligator clip, RJ45 Cable, USB transformer cable, 9Vbattery, 3.7 Li-battery, Multimeter accessories, 3 ID..
Check Stock

ALLOSUN Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC 6~42 Volts, Black (EM415PRO)

  • Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc. Quickly and easily target broken wires, current leaks and so on.
  • Diagnose and judge the break point from Slight Change of the continuous audio signal from receiver. Transmitter and receiver LEDs show open or short circuit conditions.
  • Operates on DC voltages from 6 to 42 Volts under any circumstances.
  • 7" flexible Probe allows reaching wires in congested places.
  • Adjustable sensitivity for all tracing needed. Internally protected against power surges and overloads.
  • Delicate bag included, easy for carring and storage. Powered by 2 pieces 9V 6F22 Batteries (NOT Provided by Seller).
Check Stock

pigtone Guitar Effect Pedal Power Supply 10 Independent DC Outputs Suitable for 9V 12V 18V 100mA 400mA Short Circuit and Over Current Protection PD-03

  • ♪ It can supply power to multiple guitar pedals at the same time, no current noise, input: DC18V1A, output: 6x 9V 100mA, 2x 9V 400mA, 1x 12V 100mA, 1x 18V 100mA..
  • ♪ Short-circuit/over-current protection: If a short-circuit device is inserted in the socket or the current is overloaded, the power supply will be stopped. Once the device is disconnected from the DC power source, power to the outlet will be restored. It can protect your pedal from damage..
  • ♪ Material: This pedal power supply is made of high-quality aluminum alloy, strong and durable, not easy to break, can be used for a long time, and is easy to carry..
  • ♪ Packing: 1 x PD-03 guitar pedal power supply, 1 x power adapter, 10 x 60 cm cable, 2 x polarity conversion cable, 1 x user manual..
  • ♪ pigtone is a brand and professional manufacturer of guitar pedals and pedal power supplies. We have our own production and R&D factories, engineers and guitarists. If the product you received is not ideal, please contact us for a solution..
Check Stock

Stylemafia Max 300A Continuous Duty Solenoid Relay Nickel-Plating for Golf Carts, Winch, Marine in Rush 12VDC

  • Resistance is 14Ω, Capacity is 10.2W, Contacts:Normally Open (NO)/ 12VDC WITH 2 COPPER POINT.
  • Replaces:70-111224,3635820, 1114208, 1114218, 1114223, 1114534, 1114547/ Bracket:Straight.
  • Spst, One circuit: Off - On, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center.
  • Our Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment, And Avoid Rusting, Shining.
  • Max Transient current can be 300A, but Continuous Working Current recommend under 150 Amp/ WARRANTY: Life Long Warranty and Free Return and Full Refund.
  • Note: Normally Make 80A as Working Current, Need Break 5 sec on, 50 min off.
Check Stock

60 Pieces Breakaway Pin Header, 40 Pin 2.54mm Straight Single Row Male Pin Header Connector for Arduino Prototype Shield

  • Break Away Headers: Pcb pin head is a straight single row connector, the size of pin pitch is 2.54mm/0.1 inch and there are totally 40 number of pins on each..
  • Easy to Cut: Our male pin header connectors can be cut to different lengths according to your needs, easy to break off and solder on..
  • Electric Component: The pcb pin strip plays the function of bridge in the circuit, and takes up the task of current or signal transmission. It is one of the indispensable components of PCB board and circuit board..
  • Wide Application: Straight single row male pin header is widely applied in the computer and breadboard, suit for Arduino, Raspberry pi and other electronic projects..
  • What You Get: Comes with 60pcs male header connecter strips, sufficient quantity to meet your different needs..
Check Stock

Max 300A Continuous Duty Solenoid Relay Nickel-Plating For Golf Carts, Winch, Marine In Rush 12VDC

  • Resistance is 14Ω, Capacity is 10.2W, Contacts:Normally Open (NO)/ 12VDC WITH 2 COPPER POINT.
  • Replaces:70-111224,3635820, 1114208, 1114218, 1114223, 1114534, 1114547/ Bracket:Straight.
  • Spst, One circuit: Off - On, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center.
  • Our Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment, And Avoid Rusting, Shining.
  • Max Transient current can be 300A, but Continuous Working Current recommend under 150 Amp/ WARRANTY: Life Long Warranty and Free Return and Full Refund.
  • Note: Normally Make 80A as Working Current, Need Break 5 sec on, 50 min off -/ If u need a long working one, pls note us..
Check Stock

allsun Pro Automotive Short and Open Finder Circuit Tester Wire Tracker Circuit Finder DC 6-42 V Short Circuit Detector Short Detector tool Power Probe Short Finder

  • 【LOCATING OPEN CIRCUIT】Powered by 2pcs*9V Batteries(NOT INCLUDES package). It detects and alerts you immediately where a circuit is open. You can quickly and easily Locate short circuits, open connections, broken wires, current leaks and even trace wires. Transmitter and receiver LEDs show open or short circuit conditions..
  • 【CHECKING SHORT CIRCUIT】You can also find intermittent circuit problems by flexing wires or connectors and listening for a change in the receiver tone, 7 inch Flexible Probe Help Reaching Wires in Congested Places..
  • 【SUITABLE FOR DC 6~42 Volt CIRCUIT POWER】It will work on all kinds of circuits with voltages between 6 and 42 volt DC. (such as those found in automobiles,trucks,tractors,boats,RVs,etc…With its wide working voltage range.)..
  • 【OPERATION VIDEO】Check Out Our VIDEO on the Left Side, Internally Protected Against Power Surges and Overloads. Built-in Buzzer Sound Show Open or Short Circuit Conditions, Comes with a storage bag, easy to carry..
  • 【QUICK AND EASY DIAGNOSTIC】 Judge continuity of the cables or wires, and diagnose the break point. Time saver, making your repairs quicker, makes things easier to find troubles, Tried to find a fault in auto electric circuit..
Check Stock

Circuit Breaker Buss Bar Combing Terminal Block Pure Copper PVC for Schools Hospitals Hotels Home(6 way)

  • Applicable Circuit Breaker: The single row bus bar can be connected to C45 type, DZ47 type, IC65N type and other small circuit breaker air switches..
  • PVC Shell: The dustproof shell protects the internal aging, makes the busbar have a longer life, and has the characteristics of insulation, high temperature resistance, and not easy to break..
  • Wear Resistance: The precise production for durable use, will not cause serious wear and tear due to too many installations, and can no longer be re‑installed..
  • High Quality Material: Made of pure copper, with the features of high current carrying capacity, good conductivity, large overcurrent, convenient wiring and not easy to oxidize..
  • Wide Application: The busbar can be widely used in circuit breakers in enterprises, construction sites, schools, hospitals, hotels, homes and other places..
Check Stock

Diode Check

  • 【Easy-to-use multi-function probe tester】The main functions of this power circuit probe tester include voltage and polarity test, continuity test, signal circuit test, current test, circuit breaker protection, relay test, injector test and cleaning, component activation and testing, poor ground testing, tracking and locating shorts, etc. It beeps to indicate the result while testing and is the most versatile and practical dedicated circuit repair test tool its users have ever had..
  • 【Best Electrical Tester】This electrical tester can supply power to electrical components, with reverse connection protection circuit, it is an advanced test tool for positive and negative line judgment. It shortens the diagnostic time of all 6 to 40 volt vehicle electrical systems, and is suitable for DC 6-40v cars, motorcycles, trucks, buses, construction vehicles, ships, tractors, mining vehicles and other vehicles that use DC circuits..
  • 【Quick Self Test & Relay Test & Circuit Breaker Protection】GODIAG GT101 circuit tester has quick self test function, which can ensure the tester is in good condition before use. The GT101 Probe Tester Kit can quickly detect whether t....
Check Stock

50 Amp Circuit Breaker with Manual Reset,12V-48V DC Waterproof Circuit Breaker for Car Marine RV Trolling Motors Boat ATV Manual Power,with Wire Lugs Copper Washer Screw

  • Circuit Break Protection:50 Amp Circuit breaker can protect your trolling motor from electrical damage, prevents excessive current, and stops power surges from damaging Amps. Manual Reset circuit breaker for choose and Compatible with all 12-48 V Systems..
  • Safety: 50 Amp Circuit breaker pass professional electrical performance test and aging test, the switch button has passed full inspection, the switch button is smooth, there is no stuck state, please rest assured to buy..
  • What in Package: 50 Amp breaker waterproof, accessories including wire lugs 2pcs and copper washer 4pcs, improve the conductivity..
  • Installation: Manual reset circuit creaker,no need to replace the inline fuse，can also be used as an on/off button switch for the battery. surface mount, mount on panel or firewall. water-resistant housing, protective stud insulator included splash & dustproof..
  • Application: The circuit breaker switch mainly used for car audio and amps protection and in trucks, boats, RV, marine, buses, etc.
  • also used in battery charges and DC sound system..
Check Stock

AXLIZER Double Pole Double Throw Electrical Switch, Knife Switch, Electricity Experimental Equipment, Teaching Instrument Used to Disconnect Two Simultaneous Electrical Connections

  • ... install the base to the worktable or panel.
  • the excellent switch blade of double pole double throw is available for hobby, because it has exposed non insulating contact. Although it does teach them how electricity works, they must be taught not to use actual electrical equipment at home..
  • These are low voltage, low current switches for low voltage DC power supply. 2.5 V, 3 A, 6 V max.
  • double pole double throw electrical switch for making and breaking two simultaneous electrical connections.
  • It is very suitable for home school to make and break the single electrical connection circuit experiment.
  • it is suitable for physics laboratory and school electronic experiment to teach the basic principle of electric power and simple circuit working principle, which are very suitable for demonstration and projects. Easy to use and suitable for children's learning tools, practice in the education model will certainly benefit any student..
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ¡¾High Performance¡¿The current clamp can take accurate current readings .The current clamps are the ideal tools to extend the current ranges of Oscilloscope tools.Support Auto zero at power on, relative zero correction function.It has Band wide up to 200KHz,support low battery indication .Adopt of amorphous alloy core, with high performance, low loss ..
  • ¡¾BNC connector¡¿The current clamp Multimeter features a BNC connector and can be plugged directly use. After connected well, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No ele....
Check Stock