Categories

Best Current Equipment

Eboxer Miniature Current Switch, 0.2 to 30A Flameproof Adjustable AC Current Sensing Switch, with Users Manual, Self Powered Sensing Switch for Automated Industrial Equipment(Normally Closed)

  • HIGH QUALITY SENSING SWITCH: Control various automation industrial equipment, flashlights, buzzers, relays, microcontrollers, or other electrical load devices..
  • HIGH PERFORMANCE: Compared with traditional device, thermal protectors and other devices, it has the advantages of high accuracy, stable performance and long service life..
  • SAFETY AND SIMPLE: The current sense switch is for safety, simple, and convenient monitoring or detection of current in the electrical equipment..
  • ADVANCED TECHNOLOGY: Using the principle of electromagnetic mutual inductance of current, the advanced output detection, monitoring and protection alarm products developed by the non power supply technology are adopted..
  • WIDE SUITABLE: An ideal choice for automated industrial equipment and power monitoring, widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street lamp monitoring, coal mine and other automation industries that need current monitoring..
Check Stock

Diymore USB Charger Doctor Current Voltage Charging Detector Battery Voltmeter Ammeter Multimeter USB Tester Mobile Power Panel Monitor Gauge DC LED Display

  • The tester uses a new generation of power four semi~ double loop integral converter IC , with a precision bandgap reference , range accuracy , high....
  • High temperature can be used for measuring USB powered or power consumption of the interface , mobile phone charger , U disk and other products..
  • Can easily measure the operating current of the output voltage of the USB port and equipment..
  • Smallsize , no power , and other ancillary equipment, plug and play also detect USB charger output voltage and current are standard suitable for....
  • USB powered devices can be used to measure air , voltage loads , USB terminal equipment working voltage and current ..
Check Stock

Miniature Current Switch,Current Sensing Switch,with Rails,Normally Open Amp Sensor Monitoring Relay AC 0-30A Detectable（M3050）

  • ...: M3050 AC with rails current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-30A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
  • ABS material: High-power MOS tube non-contact....
Check Stock

JANSANE SCT-013-000 100A Non-invasive AC Current Sensor Split-Core Clamp Current Transformer

  • This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation..
  • This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
  • Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for....
  • Two Form of Output: current output or voltage output (burden resistor needed to add).
  • Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection.
Check Stock

Current Sensing Switch/Relay,AC Current Sensing Switch 0-200A Normally Open Current Sensor Monitoring Relay,Linkage PLC Signal,Overload Controller M3080）

  • ...lti-Purpose: M3080 AC current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-200A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-200A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
  • ABS material: High-power MOS tube non-conta....
Check Stock

Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V

  • ... by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply must be able to supply 2A. The reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
  • Computer debugging USB--TTL. This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply must be able to supply 2A. The reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers..
  • Make sure your SIM card is not locked. The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default). Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8. GPRS mobile station class B.....
Check Stock

New Genuine PS for HP Z420 Workstation 600W Power Supply 632911-001 623193-001

  • 24V Power Supply: Input AC 110V/220V, Output 24V, Rated power 24A 600W, PSU(SMPS) AC to DC convert , output current depends on the requirements of the power consuming equipment, Power multiple devices with different Currents/ Watts.
  • Intelligent Cooling: 24V 600W Power Supply converter with aluminum alloy shell, built-in cooling fan, metal shell with multiple holes for more efficient cooling, more stable work, high efficiency.
  • USED WIDELY：DC 24V Power converter Used for Brushless type motor drive, Amplifier,Radios,LED drive, CCTV Camera System, Car Stereos, water Pump and more 24V Device. NOTE:Not suitable for charging Battery,Speed Control Motors..
  • Safe stable: long service life, power supply with over/under voltage, overheating protection,Compact:21.5×11.5×5cm/8.5×4.5×2 inch, weight 0.75 kg，SAFETY: Use must derating: max load cannot exceed 80%.
  • Note: SMPS peak power is 25A 600W, avoid overload, For resistive equipment, Recommended for equipment under 20A 480W. For motor equipment, the starting current will be much higher than the rated power and the peak power of the SMPS needs to exceed 2 times the motor power..
Check Stock

6A

  • Rated Current 6A/10A/20A/30A/40A/50A/100A(Optional).
  • Compact size, easy to install with stud connection.
  • Widely used in all kinds of 3-phase 3-wire industrial automation equipment, such as 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners etc..
  • If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

WiFi ExplosionProof Circuit Breaker Remote Controlled Circuit Breaker CorrosionResistant OxidationResistant 4P AC400V for Home

  • Large rated current load large equipment, safe and practical to use..
  • Standard Tightening Force Large terminal, the tightening force is greater than the standard, safe and convenient.
  • High Quality : Flame retardant PC material, insulated housing, safe and has long service life..
  • PRACTICAL: Remote intelligent control of home, student dormitory, business, municipal engineering, renting house, etc..
  • SAFE AND RELIABLE: Circuit Breaker has large rated current load large equipment, safe and practical to use..
Check Stock

Heyiarbeit 50 Ohm 50W Ceramic Wirewound Potentiometer Linear Variable Rheostat Resistor with Knob for Light Dimmers Motor Speed Control 1pcs

  • [Parameters] - Model: Variable sliding potentiometer with knob.
  • Overall Size: 64 x 67mm/ 2.52" x 2.64" (DxH).
  • [Material] - The ceramic wirewound potentiometer is consisted of ceramic core and a resistive wire wrapped to form a toroid coil with a wiper axle.
  • [Features] - The potentiometer carbon brush touches the resistance wire, and the resistance value is easy to adjust.
  • the rocker type manual operation, natural cooling, the alloy shaft, smooth and durable, and moisture resistance, high power, strong overload capacity, high temperature resistance.
  • [Function] - The rheostat is used for the regulation of voltage and current in power equipment and the middle circuit, and controls the resistance of the circuit without interrupting the current.
  • [Application] - Ceramic wirewound potentiometer can be widely used as a motor speed regulator, suitable for pumps, fans and blowers or other applications that require high voltage and current.
  • Suitable for adjusting the working voltage and current of power equipment and circuits with AC voltage not exceeding 380V and DC voltage not exceeding 220V.
Check Stock

Fuck Jeff Bezos / Line 6 Amp (Live)

  • Rated Current 6A/10A/20A/30A/40A/50A/100A(Optional).
  • Compact size, easy to install with stud connection.
  • Widely used in all kinds of 3-phase 3-wire industrial automation equipment, such as 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners etc..
  • If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

9V Battery,USB Rechargeable 9Volt Lithium Batteries 1000mAh,Long Lasting LI-ion Batteries, No Memory Effect-with Micro Charging Cable,for Smoke A larms,Electric Guitar,for Any Need Devices9V Battery

  • 【No current noise】ASONA 9V battery is optimized for audio music products, and there will be no current noise. Perfectly simulate the discharge principle of alkaline battery and won't hurt your equipment. The unique micro power standby technology is adopted, and the standby time will not be broken for up to 5 years..
  • 【Long Lasting Power】1000mah large capacity 9V lithium ion battery provides more lasting power supply for wireless microphone, wireless video game controller,Wireless doorbell electronic toys, smoke / fire alarm, metal detector, remote control detector, electric guitar, professional audio, LED lighting equipment, walkie talkie, multimeter, family safety equipment, medical equipment, etc..
  • 【Recharged 1200 Cycles】USB 9V Rechargeable batteries have longer service life than other disposable batteries, environmental and saving more money. Batterey will reach top performance after 3-5 times fully charger cycle..
  • 【Multiple Protection, Safety Assurance】These 9V lithium batteries have temperature protection, over-discharge protection, over-charge protection, over-current protection, over-voltage protection, and short-circuit protection function. NOTE: PLEASE CHARGE FULLY BEFORE USE, AS WE ONLY CHARGE THE BATTERY TO 20% FOR SAFETY DELIV....
Check Stock

bayite DC 5-120V 400A Mini Digital Current Voltage Amp Meter Gauge with Hall Effect Sensor Transformer

  • Electrically isolated from high voltage power source which eliminates risk to delicate monitoring equipment and also minimizes safety concerns.
  • Diameter of the hole through sensor is 3/4 inch(19 mm).
  • Loop through sensor multiple times to strengthen signal. For example, if your current signal is only 0.2 Amps, you could loop the wire through the....
Check Stock