Best Current Isolation Amplifier
SVS PB-1000 Pro Ported 12-Inch Subwoofer Bundle with SVS SoundPath Subwoofer Isolation System (4-Pack) - Black Ash
- This bundle includes (1) SVS PB-1000 Pro Ported 12-Inch Subwoofer and (1) SVS SoundPath Subwoofer Isolation System (4-Pack)..
- 325 Watts RMS and 820+ Watts Peak Power Sledge STA-325D Amplifier combines massive high current output of discrete MOSFETs with Class D efficiency. Boasting vanishingly low distortion, the unique design unleashes nearly limitless on-demand power while maintaining precise driver control..
- High-Excursion 12-inch SVS Subwoofer Driver features dual ferrite magnet motor assembly with long-throw parabolic surround for extreme excursion that delivers massive output with finesse and accuracy, even at the most intense listening levels..
- 50MHz Analog Devices Audio DSP renders pinpoint accurate frequency response through advanced in-room tuning and powerful controls, while letting the subwoofer take control of a space with room-filling bass..
- Isolation System: Affordable and discreet alternative to platforms and risers. - Works with any brand subwoofer which accepts screw-in feet. - Fewer complaints from house occupants and neighbors in apartments and townhouses. - Cleaner and tighter sounding bass with less floor boom and vibration. - Less buzz/rattle from objects in the room..
Check StockCurrent Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A
- Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
- The measured current of this current transmitter is AC 0-10A/20A/50A.
- The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
- With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
- through‑core structure design, isolation withstand voltage up to 2000VAC.
- hysteresis less than 1%, can be used under strong magnetic field conditions..
- The shell is made of self-extinguishing material ABS.
- it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..
Check StockCurrent Transmitter SZT20-CH-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-200A
- Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output.Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions..
- The measured current AC: 0-10A / 20A / 50A, 0-100A / 150A / 200A can be selected.Output signal DC: 0-5V / 0-10V /4-20mA three forms are available..
- Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement.Through-heart structure design, isolation withstand voltage up to 2000V AC..
- The outer casing is made of self-extinguishing material, safe and durable.It is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
- It is suitable for various applications requiring current and voltage conversion.It has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
Check StockSenva C-2343 : Current Transducer 0-5VDC Output
- Self-powered, no external power supply required..
- Easy to install and use, no need to connect DC into the circuit when measuring..
- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
- Straight- through structure design, isolation withstand voltage up to 2000V..
- Measured current AC 0-10/20/50A, output signal DC 0-10V..
Check StockCR Magnetics CR5211-100 DC Hall Effect Current Transducer with Single Element, DC, 003e=2K Output Load, 24 VDC +/-10%, 0-100 ADC Input Range, +/-10 VDC Output Range
- Output signal DC: 0-5V / 0-10V /4-20mA three forms are available. The outer casing is made of self-extinguishing material, safe and durable..
- The measured current AC: 0-10A / 20A / 50A can be selected. Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions..
- Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output. It is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
- Through-heart structure design, isolation withstand voltage up to 2000V AC. It is suitable for various applications requiring current and voltage conversion..
- Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement. It has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
Check StockMiller 191941 Transducer, Current 200A Module Supply V +/- 15V
- Straight-through structure design, isolation withstand voltage up to 2000V..
- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
- Self-powered, no external power supply required..
- Measured current AC 0-10/20/50A, output signal DC 0-5V..
- Easy to install and use, no need to connect DC into the circuit when measuring..
Check StockRaguso AC Current Transducer, Small Compact Simple Installation AC Current Transmitter Widely Applicable for Home for Industry for Indoor
- High-quality material: The AC current transmitter is made of high-quality ABS material, which is strong and durable..
- High accuracy: professional design of transmitter and receiver modules, mutual inductance current monitoring, high current detection accuracy, safe isolation of input and output..
- Self-powered: The current sensor clip is self-powered, no external power supply is required, and it is easy to use..
- Withstand voltage: The current sensor relay adopts a straight-through structure design, and the isolation withstand voltage is up to 2000V..
- Application: AC current sensor is suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system, etc..
Check StockINA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max
- 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
- 【Professional Use】Current transducer used for energy meter in special.
- AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
- 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
- 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
- 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check StockWilliams Sound Pocketalker 2.0 Personal Amplifier Base Bundle - Includes - Cleaning Kit with 6AVE Electronics Micro-Fiber Cloth
- AMPLIFIED SOUNDS: The Pocketalker PKT 2.0 is a versatile assistive listening device designed to improve communications in difficult listening....
- BLOCKS UNWANTED NOISES: The Pocketalker system includes EAR 042 dual stereo isolation earphones. These earphones provide noise isolation to allow you....
- LISTEN ALL DAY: This personal amplifier operates on 2 AAA batteries with up to 105 hours of typical usage..
- EASY TO USE: This listening device offers a 3 tonal control setting that allow you to tailor your listening experience with high-quality sound and a....
- INCLUDES: Williams Sound PKT 2.0 Pocketalker Personal Amplifier, EAR 042 In-Ear Stereo Headphones, HED 024 Stereo Headphones, MIC014 - Plug Mount....
Check StockCurrent Transducer, SZT15-CH-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A,Stable Performance
- 【DC Current Output Signal】 - The SZT15-CH-420E AC current transducer provides real-time isolated measurement of AC current in the grid or circuit and converts it to a 0-5V / 0-10V or 4-20mA DC current output signal ..
- 【Withstand Voltage】 - Through-heart structure design, insulation withstand voltage up to 2000V AC. The measured current AC: 0-10A / 20A / 50A can be selected..
- 【Usage】 - Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions. The current transducer is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
- 【High Performance】 - The outer casing is made of self-extinguishing material, it has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
- 【Easy To Installation】 - There is no need to connect the dc series into the circuit during measurement, safe isolation of input and output. It is suitable for various applications requiring current and voltage conversion..
Check StockTertullus 4Pcs Carbon Fiber Speaker Audio Isolation Feet Speaker Spike Pads Turntable Feet Pads Floor Protectors Dampening Pad Amp Feet for Turntable Speaker Subwoofer Etc 40mm×10mm
- ① This Is A Set Of Four Strong, Durable And Light Weight Speaker Isolation Feets. They Are A Perfect Match For Any Spike In Order To Obtain The Best Isolating Effect For Your Audio Components. Also, They Can Protect Your Hardwood Or Laminate Floor From Spike Marks..
- ② High Quality: This Speaker Isolation Feet Is Made Of Carbon Fiber,not Easy To Fade And Oxidation. Its Surface Is Smooth Without Any Burr, Delicate Appearance, And Comfortable Hand Feeling..
- ③ They Can Be Installed To Separate Your Turntable Deck, Cd Player, Amplifier Or Other Audio Components From Vibration. Therefore, The Tones Will Be More Focused And Tighter. And, There Will Be Much Less Noise To Be Transferred To Other Rooms From The Floor..
- ④ Utilize These Anti-vibration Speaker Isolation Feets To Get A Clearer Sound For Your Hifi Equipments Or Reduce External Noise Disturbance On Your Speakers..
- ⑤ Wide Application: The Speaker Spikes Is Suitable For Hifi Speaker, Speaker Frame, Amplifier, Cd Dvd Player, Turntable Recorder, Chassis, Instrument, Etc..
Check StockDayton Audio DSS4-BC Black Chrome Speaker Spike Set 4 Pcs.
- 【APPLICATION】 Our Isolation Plaform Pad Feet Stand Spikes Is Fit For Record Players / Subwoofer / Turntable /Amplifier / Speaker / Recorder And More Other Hifi Enquipment.
- 【MATERIALS】Auluminum Alloy ( With Great Anodized, Sand Blasting Finish)+ Rubber Mat(Prevent Slipping, Better Protect The Audio And Foot Pads) + Springs.
- 【ISOATION PLATFORM DIMENSION】D44x H40mm,4pcs/carton Isolation Feet.
- 【WITHSTAND WEIGHT】Each Isolation Pad Feet Withstand Up to 9kg/ 19.8lbs, 36kg/ 79.3lbs for 4pcs In Total..
- 【EASY TO USE】No Need to assemble, Take Out From The Box To Suspend Your Audio Equipment..
Check StockAC Current Transmitter Walfront AC Current Transducer Overload Protector Input AC 0-200A Output DC 0-10V SZT20-CH-10V No Power Required
- ☛ CURRENT MONITORING -- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
- ☛ MEASURE CURRENT RANGE -- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
- ☛ STRAIGHT-THROUGH DESIGN -- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
- ☛ ABS OUTER CASTING -- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
- ☛ WIDE APPLICATION -- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
Check Stock