Categories

Best Current Terminal

Opto 22 SNAP-PAC-RCK16 - SNAP PAC 16-Module Mounting Rack

  • DIN Rail mount 30Amp 300V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • A / B position maximum current 30Amp(each position). A1~A12 total maximum current 30Amp(total positions). B1~B12 total maximum current 30Amp(total positions). A1~A12 / B1~B12 position maximum current 20Amp(each position). Maximum voltage 300V..
Check Stock

Terminal Strips, FIXITOK 6 Sets 4/5/6 Positions Terminal Block Strips Waterproof 600V 15A Screw Terminal Strips with 400V 15A Pre-Insulated Terminal Barrier Strip Jumper

  • PRACTICAL TERMINAL STRIPS - Our double row screw terminal strips can help you to connect bare wires to avoid clutter, while jumpers allow signals or power to be distributed neatly, making wiring connection simpler and more efficient. With Fixitok’s screw terminal blocks, you can quickly disconnect a wiring branch without removing the entire system..
  • SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide red and black jumpers to help customers distinguish positive and negative wire when installation..
  • HIGH QUALITY MATERIAL - The 4/5/6 positions terminal block strips are made from polycarbonate with flame retardance and nickel-plated copper with excellent electrical conductivity and anti-oxidation performance, to keep working stably and extend lifespan..
  • EASY INSTALLATION - Installation is a breeze. There are two screw holes at each sides of the terminal blocks, you just need to fix them with screws and connect cables. We provide 3 kinds of terminal blocks (4/5/6 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. For 8/10/12 positions, please search for B08D3J19FT on Ama....
Check Stock

Blue Sea Systems 5035 / Blue Sea 5035 ST Blade Fuse Block w/Cover - 6 Circuit Independent w/o Negative Bus

  • DIN Rail Mount 20 Position Screw Terminal Block Distribution Module with 10 Channel Fuses..
  • Terminal postion 01 to 01, 02 to 02 ......, 10 to 10 direct connected, rated current 30Amp for per channel..
  • Terminal postion F1 to F1', F2 to F2' ......, F10 to F10' connect via fuses, rated current 10Amp for per channel. Replaceable fuses with easy to operate fuse holders, fuse holders for D5mm x L20mm tube fuse, factory-installed fuses Slow Blow 10Amp..
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 25A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 25A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 15A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 15A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

Frienda 6 Pieces 2-4 Gauge 175A Battery Quick Connector 12-36V Battery Quick Disconnect Wire Harness Plug Kit Battery Quick Connector Disconnect Plug for Motor Winch Trailer (Red)

  • Universal:Widely used in connect/disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups,trailers, or for any purpose requiring a high-current. Rated currents (amperes): 175 A.Rated Voltage: 600 V.Suitable for 1-2 Gauge..
  • Safe: Both ends are suitable for connection to the power or load side because of its identical connectors.The ends are made to connect only one way, making it impossible to connect the wrong polarities to one another, preventing accidental reverse polarity when hooking up a charger..
  • Suitable for low or medium current use. With 4 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to guarantee stable voltage and current..
  • Durable:Combined shell made from sturdy PC fire-retardant materials, allowing for over 10,000 connect/disconnect actions. With fitted rubber boot covers, protect against dust, moisture and corrosi..
  • Installation: Easy to use and install. Insert the wires into the terminal pins, then solder or crimp them. Insert the terminal pins into the connector housing and lock them in place. (Package include：2 Dust Cover,2x Connectors ,4x Terminal pins.).
Check Stock

UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot

  • Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
  • Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
  • Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
  • Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..
Check Stock

CZH-LABS DIN Rail Mount 2 Ports Passive RJ45 PoE Power Injection Board Power Over Ethernet Injector Module.

  • Simple Power up 2 Passive 10/100Mbps PoE devices by one power source Application use for Access Points, IP cameras, IP phones, etc..
  • Power Input terminal block for all PoE power supply, each port serial a recoverable fuse(fuse value 1.1Amp / 72V). Power Expansion Output terminal....
  • Switch On/Off to save electricity while not use, LED indication for switch On/Off status..
  • Specifications: Terminal Block Power Input: 12VDC - 60VDC, maximum current 10Amp.
  • Termianl Block Expansion Output: maximum current 10Amp.
  • High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check Stock

Positive 36-inch 3/8” Positive Terminal Battery Replacement Cable, Heavy-Duty 2 AWG 100% Copper, 100mm Accessory Lead, 10mm Copper Lug End and 19mm Top Post Terminal, by Tech Team

  • When it comes to battery cables the LOWER the AWG number the HIGHER the current carrying capacity. Tech Team’s #2 AWG cables carry far more current than other #4 AWG, #5 AWG, or #6 AWG cables. This means less heat buildup and less voltage / amperage drop which prolongs the life of starters, inverters, motors, and other connected electrically powered devices..
  • Tech Team’s Positive Terminal Cable feature a 10mm – 3/8” diameter tinned double crimped 100% copper lug terminal end with a protective heat shrink polyolefin sleeves to prevent moisture incursion and eliminate corrosion and a military grade 19mm lead top post terminal with a 100mm accessory lead..
  • Tech Team’s battery cables are the best you will find anyplace and are the best possible option for Marine, Boat, Solar, Inverter, Motorcycle, Automobile, Tractor, Bulldozer, Excavator, Riding Mower, Golf Carts, and many other applications..
  • Includes one (1) red 36 inch #2 AWG 100% copper stranded wire top post positive terminal battery cable, a 100mm accessory lead, and a 100% copper 3/8” diameter tinned lug terminal end with heat a shrink protective sleeve..
Check Stock

WARN 22680 Quick Connect Winch Power Cable Connector Plugs, 1 Pair

  • {INSULATED FLAME-RETARDANT SHELL}: The shell of the battery quick connect/disconnect is made of high-quality PC flame-retardant material, with a fire rating of UL94 v-0, safe, wear-resistant, and compression-resistant, ensuring stability in use in complex and harsh environments.
  • {SILVER COPPER PLATED TERMINAL}: The thicker copper-plated silver of the battery quick connect disconnect set greatly enhances the electrical conductivity, which helps prevent ignition when large current passes, and ensures stable current transmission.
  • the copper terminal of battery quick disconnect kit is convenient for cold pressing, welding, and faster and firmer wiring.
  • {SPECIFICATIONS AND PACKAGING of the BATTERY QUICK CONNECTOR SET } Voltage: 12-36 volts DC.
  • the package contains 6 groups of 6 to 10 battery quick connectors, including 6 connectors, 12 terminal pins, 6 caps, the quantity is enough to meet your different Demand or replacement.
  • {EASY TO INSTALL}: You can quickly install the plugs of these battery quick disconnect connectors, insert the wires into the terminal pins, and then perform welding or crimping. The ends of the connectors are the same, so both ends are suitable for connecting to the power or load side.
Check Stock

Battery Cable Quick Connector 175A AWG 1/0 Towing Winch Quick Connect Systems for Winch Auto Car Trailer Driver Electrical Devices

  • Widely used in connect/disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups,trailers, or for any purpose requiring a high-current..
  • Material: PC fire-retardant materials+stainless steel.Rated currents (amperes): 175 A.Rated Voltage: 600 V.Suitable for 1-2 Gauge..
  • Connector Handle Makes disconnecting of connectors quick, easy and safe..
  • The heavy duty components are suitable for low or medium current use. With 4 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to guarantee stable voltage and current..
  • Package include：1 Battery Winch Trailer Quick Connector Handle,2 Dust Cover,2x Connectors ,4x Terminal pins..
Check Stock

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Current Sensor Module】Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
  • 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check Stock

micrl 2/0 AWG 350A Battery Quick Connect/Disconnect, Jumper Cable Plug Connector Kit for Recovery Winch, Towing Systems(Gray)

  • Suitable for: Gauge battery quick connectors provide a simple way to connect or disconnect winches trailers or for any other requiring high current, quick disconnect connectors..
  • Durable: The battery quick connect plug is made of sturdy PC fireproof material, equipped with a rubber boot cover to prevent dust, durable and reliable, not easy to break, and long service life..
  • Easy installation: Just insert the wire into the terminal pin, then solder or press, the connector ends are the same, so either end is suitable for connecting the power supply or the load side.
  • Stability function: There are 30 terminal pins made of red copper in the package, which are covered with silver and have strong conductivity, which can reduce resistance and ensure voltage and current stability.
  • You will receive: 15 sets of 12-36v battery quick connectors are included in the package, including 15 connectors, 30 terminal blocks and 15 covers..
Check Stock