Categories

Best Current Transducer

Current Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A

  • Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
  • The measured current of this current transmitter is AC 0-10A/20A/50A.
  • The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
  • With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
  • through‑core structure design, isolation withstand voltage up to 2000VAC.
  • hysteresis less than 1%, can be used under strong magnetic field conditions..
  • The shell is made of self-extinguishing material ABS.
  • it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..
Check Stock

MASTECH AC Current 0.1A-400A Clamp Meter Transducer True RMS MS3302

  • Professional AC Current Transducer Clamp Meter.
  • Working voltage: 600V CAT.II per IEC 1010 - 1.
  • With a packed bag, design for easy carrying.
Check Stock

Hantek DSO2D10 2 CH Oscilloscope with Built-in DDS Generator, 100MHz 1GSa/s

  • ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 400Hz Bandwidth, 1mV/10mA, 650A..
  • ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
  • ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms..
  • ⚡【Application】1.Power circuit measurement and malfunction analysis.
  • 2.Motor drive of frequency converter (or other electronics) measurement.
  • 3.Power electronics equipments measurement..
  • ⚡【What you will get】1*AC/DC Current clamp CC-650,1*English Manual..
Check Stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

Hantek 6254BE Digital oscilloscope 250MHz Bandwidth Automotive Oscilloscopes Car-Detector 4 Channels 1Gsa/s USB PC Osciloscopio

  • ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 20kHz Bandwidth, 1mV/10mA, 65A.
  • ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
  • ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms.
  • ⚡【Application】1.Power circuit measurement and malfunction analysis.
  • 2.Motor drive of frequency converter (or other electronics) measurement.
  • 3.Power electronics equipments measurement..
  • ⚡【What you will get】1*AC/DC Current clamp CC-65,1*English Manual..
Check Stock

PEACEFAIR PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter

  • SMALL AND LIGHT: This current transformer Built-in input coil.
  • SNAP JOINT STRUCTURE:The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied..
  • MINI SIZE:This is a mini split base current transformer.
  • it's the smallest one compared to the similar products (output 100MA)..
Check Stock

PreSonus Eris E5 XT 5.25' Near Field Studio Monitor with EBM Waveguide (Single)

  • 5-inch woven composite low-frequency transducer offers deep lows..
  • 1-inch ultra-low-mass, silk-dome, high-frequency transducer boasts smooth highs..
  • Now comes included with Studio One Prime and Studio Magic plug-in suite, over $1000 USD worth of music production software..
  • State-of-the-art front-ported enclosure creates tight bass frequencies..
  • Innovative 100°(H) x 60°(V) EBM waveguide makes way for a wide sweet spot and solid imaging..
  • Acoustic tuning controls allow you to tailor the sound to your space (Level, HPF, LF Trim, HF Trim, Acoustic Space).
  • 80 Watt, Class AB bi-amplification drives up to 102 dB of sound.
  • Balanced XLR, TRS, and unbalanced RCA inputs ensure connectivity to almost any audio source..
  • Protection against RF interference, extreme output current, over-temperature, transient, external mains, subsonic and more..
Check Stock

LUCKY Fish Finder Transducer Mount Arm Kayak Bracket Transducer Mounting Arm Flexible for Boat Canoe Kayak Fishing

  • ◆ Designed for Kayak & SUP Fishing : The transducer mount arm is an easy way to mount fish finder transducers as well as other kayak accessories. It is the best way to protect your transducer from scratching or cracking when your boat is going through bottom complex terrain of waters. The transducer mount arm helps to adjust the sank depth of wired transducer compared to mounting the transducer to the boat hull..
  • ◆ 360° Flexible Arm : The extended length of the transducer mounting arm is 21inch. Since the arm is bendable, you could adjust the angle of the transducer mounting arm to your most favorable position. Although it is a flexible arm, it couldn’t be either easily bended by the slight force. It is a solid and hard metal stick covered by the rubber..
  • ◆ Easy Install & Remove : The design of transducer mount base cup is adaptable for various kayaks and small boats. You could fix it by its unique suction cup on any smooth surface. So you can switch the transducer mount arm to different kayaks as you like. Meanwhile, you could also fix the transducer mount arm by three screws if there are screw holes in your kayak. You could also use double sided s....
Check Stock

MALLORY SC110 TRANSDUCER, PIEZO, 2.9KHZ, 80DBA, 120V

  • Price For: Each Transducer Function: Alarm Tones: Continuous Supply Voltage Min: 30V Supply Voltage Max: 120V Operating Current Max: 19mA Sound Level SPL: 80dBA Resonant Frequency: 2.9kHz Color: Black RoHS Compliant: No.
Check Stock

MALLORY SC628ANR TRANSDUCER, PIEZO, 2.9KHZ, 95DBA, 28V , 12 Count

  • Price For: Each Transducer Function: Alarm Tones: Continuous Supply Voltage Min: 6V Supply Voltage Max: 28V Operating Current Max: 30mA Sound Level SPL: 95dBA Resonant Frequency: 2.9kHz External Height: 32.6mm RoHS Compliant: Yes.
Check Stock

85dBA Piezo Transducer (Speaker)

  • Price For: Each Transducer Function: Alarm Tones: Fast Pulse Supply Voltage Min: 6V Supply Voltage Max: 28V Operating Current Max: 16mA Sound Level SPL: 80dBA Resonant Frequency: 2.9kHz External Height: 32.6mm RoHS Compliant: No.
Check Stock

MALLORY SC628P TRANSDUCER, PIEZO, 2.9KHZ, 80DBA, 28VDC

  • Price For: Each Transducer Function: Alarm Tones: Continuous Supply Voltage Min: 6V Supply Voltage Max: 28V Operating Current Max: 18mA Sound Level SPL: 75dBA Resonant Frequency: 1.9kHz External Height: 32.6mm RoHS Compliant: No.
Check Stock

Faria 13751 Chesapeake Black Depth Sounder with In-Hull Transducer

  • Please confirm part will fit before ordering.
  • Current drain:90 mA max. with supplied transducer.
Check Stock