New Replacement After Market V-Belt 1343756 1343782 Delta Drill Press 11-990 K 32.5
- LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
- MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
- WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
- SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
- DNLK drill chuck will fit Delta Model 11-990 Type 1.
Check StockRUB1ZR0 Boresighter Kit Precision Alignment Bore Sighter with 16 Pieces Adjustable Arbors
- Our bore sighter kit is suitable for air guns and shotgun with a short range（less than 100 yards). It contains a multi-caliber collimator and different arbors..
- This kit includes 15 arbors for .177, .22, 6mm, .25, 6.5mm, .27, 7mm, .30, .32, .338, .35, .375, .44, .45, .50. It also contains a screwable arbor from 12 to 20..
- The boresighter kit makes sighting much easier by aligning the scope's reticle with the barrel. Help you pre-zero easily without wasting ammo or range time..
- The boresighter and different arbors are nicely packaged in a blow-molded case. The box is marked with a scale and can be easily put back after use..
- No longer need to purchase a separate bore sight to match the use of different products. This kit is a good beginner kit if you don't know where to start..
Check StockLenox Tools 1779810 3.25-Inch Pilot Drill Bit for Hole Saw Arbors
- Drill bit is compatible with 2L, 5L and 6L SNAP-BACK arbors.
- Fits 2L, 3L, 5L, 6L and 7L solid-hex arbors.
Check Stock
Wood Lathe Drill Chuck Fits - Jet 1440Vs Wood Lathe - 3/4 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA
- LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
- MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
- WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
- SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
- DNLK drill chuck will fit Jet 1440Vs Wood Lathe.
Check StockMetal Lathe Drill Chuck Fits - Grizzly G8688 Metal Lathe - 1/2 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA
- LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
- MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
- WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
- SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
- DNLK drill chuck will fit Grizzly G8688 Metal Lathe.
Check StockLenox 1864904 Pilot Drill Bit for Hole Saw Arbors (Pack of 25), 3 1/4"
- The split-point pilot drill penetrates quickly, self-centers, and won't "walk" across the work surface.
- Use with 1L and 4L Solid Hex Arbors and 2L Hollow Hex Arbors..
Check StockIVY Classic 28112 Hole Saw Arbor Adaptor, Adapts 1/2-Inch - 20 thread to 5/8-Inch - 18, 1/Card
- Adapts 1/2"-20 threaded arbors to fit 5/8" - 18 threaded hole saws.
- Adapts 28100, 28103, 28104, 28105 and 28108 arbors to fit 1-1/4" through 6" hole saws.
- Hex flange for easy installation and removal.
Check Stock
LENGO Bore Sight Kit Precision Firearm Bore Sighter Rifle Boresighter with 16 Pieces Adjustable Arbors for Hunting or Shooting Scope
- [Widely Use]: This bore sight kit includes 16 arbors and comes with caliber: .177, . 22, 6mm, . 25, 6.5mm, . 27, 7mm, . 30, . 32, . 338, . 35, . 375, . 44, . 45, . 50 and 20mm. Choose a suitable arbor, though the spring clip is hard the first time..
- [Simple Operation]: Boresight kit is easy to set up. When you are using the arbors to have a loose fit, you can wrap a cloth or something around them to make a snug fit. This also helps protect the inside of the barrel..
- [Save Your Time and Ammo]: Boresighter kit will help you to boresight scope for speedy pre-zeroing and will get your scope as close to sight in as possible without shooting..
- [Professional Equipment]: The rifle bore sighter kit is 36-42mm above the barrel, the height is matching of your optics, so it will make sure you get the accuracy..
- [Convenient package]: The Hunting Boresighters and 16 arbors are conveniently packaged in a case. You can readily choose what you require and put it back after use..
- [Note]:This bore sight kit is not suitable for all gun, please see the use range, as professional equipment, please follow the manufacturer’s instructions before use..
Check Stock
HQRP On-Off Toggle Switch compatible with Delta 489105-00 11-900 11-950 11-980 11-985 11-990 14-040 17-900 DP400 DP300L 17-950L Drill Press, 34-670 36-600 36-977 36-978 36-980 36-981 TS200LS Table Saw
- LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
- MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
- WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
- SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
- DNLK drill chuck will fit Delta Model 11-990 Type 2.
Check StockALAZA Funny Sloth Hanging On The Tree and Sitting Among Flowers Garden Flag Welcome Home House Flags Double Sided Yard Banner Outdoor Decor 12 x 18 Inch, 1 Piece
- GREAT GARDEN DECOR - This cute little garden flag is the best house decoration you will ever find. It immediately catches the attentions of all your friends, neighbors, guests or anyone who walks by.
- HIGH QUALITY - Outdoor art flags and banners are made of machine washable 100% polyester, fade resistant to keep them flying for many seasons.
- SPECIFICATIONS - Two size optional: 12x18 inch (Garden Size) 28x40inch(House Size). One package includes one flag. Flag pole is NOT included.
- FUNCTION - Artistic flags hang beautifully from a sewn-in sleeve and it¡¯s easy to switch out our seasonal flag designs using the standard line of flag poles, stands, arbors, and hangers.
- DIY CUSTOM - Fashion Characteristic Print.Please contact us if you would like to design it by yourself.
Check StockNewship Bore Sight Kit Portable Adjustable Boresighter Complete Tools Hunting or Shooting High Precision Multiple Caliber with Arbors for Handgun and Rifle
- 【Well Designed】: Well designed and made optic that allows point of aim to be set very closely. It will get your scope on target without wasting....
- 【Clear Grid】: The MOA grid is very clear, super simple to set up and get a rough sight in to prepare for a live fire range sight in, and works....
- 【15 Arbor Set】: This kit includes 15 arbors for .177, .22, 6mm, .25, 6.5mm, .27, 7mm, .30, .32, .338, .35, .375, .44, .45, .50. This kit comes....
- 【Sturdy Arbor】: Each arbor is sturdy, which is machined stainless steel with a brass tension bar to give better stability in the barrel..
- 【 Tight Fit】: Arbors will provide a tight fit so it will make sure you get the accuracy of "on the paper", and is a bit more accurate for setting....
Check StockSKIL SPT4004 7\ Segmented Diamond Saw Blade
- Ideal for cutting concrete, brick and blocks.
- Heavy duty metal construction for maximum cutting ability.
Check StockSKIL SPT4003 7\ Turbo Diamond Saw Blade
- Ideal for cutting concrete, brick and blocks.
- Heavy duty metal construction for maximum cutting ability.
Check Stock
