Categories

Best Custom Metal Shim Stock

StewMac Acoustic Guitar Neck Shims Maple - Set of 10

  • Fitting an acoustic guitar neck into a dovetail joint is precise work - many times you need to shim a loose side of a dovetail when fitting the neck.
  • This wafer thin shim stock is well made for a clean fit, and is just large enough to create a taper or wedge.
  • Maple shim stock is a problem solver in a busy repair shop, and we found this size has a million uses around the shop—from shimming a saddle, to....
  • Each shim is a 2" x 5" rectangle, approximately 0.022" (0.55mm) thick.
Check Stock

8 Pieces Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.001 0.002 0.004 0.006 0.008 ,0.012 0.016 0.02 Thickness Brass Metal Shim Stock

  • ✔----- Our brass shim stock assortment include 8 thicknesses, which can meet your different needs in daily life. You deserve it..
  • ✔----- Brass sheet is made of quality brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • ✔----- Brass shim stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
  • ✔----- Brass shim widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • ✔----- Shim stock assortment size: 6" Length x 3" Width, 0.001", 0.002", 0.004", 0.006", 0.008",0.012", 0.016", 0.02" Thickness, you will use them one day..
Check Stock

Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness.Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 4 Width 0.001 0.002 0.003 0.005 and 0.01 Thickness Metal Sheets Plates 5 Pieces

  • With 5 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 4" Width, 0.001", 0.002", 0.003", 0.005" and 0.01" Thickness.Nicely polished up.
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.002 0.004 0.006 0.008 ,0.012 and 0.016 Thickness Brass Shim Stock 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 3" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" Thickness. Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

12 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness Metal Shims Brass Sheet

  • ✔ ---- With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ ---- Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" thickness, 2 pieces for each thickness..
  • ✔ ---- Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • ✔ ---- Metal shims brass sheet widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • ✔ ---- If you are a lover of DIY crafts, you should prepare this brass strip, because it is indeed widely used and multifunctional, you will definitely use it..
Check Stock

316 Stainless Steel Shim Stock 0.001 Thickness x 6 Width x 12 Length Stainless Steel Sheet Shim 2 Pieces

  • ✿ 316 stainless steel shim stock is made of superior soft temper material, has a better corrosion resistance performance than 304 stainless steel..
  • ✿ Better material means better quality, our 316 stainless steel shim has good machinability, rust resistance,high temperature resistance..
  • ✿ Stainless Ssteel shim stock widely used in precision machinery, electronic equipment, mold manufacturing, processing equipment, mechanical parts, stamping parts, hardware manufacturing, ect.
  • ✿ Size：0.001" thick x 6" width x 12" length， 2 pack, very easy to cut and form, you will never be disappointed..
  • ✿ Reliable Service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

12 Pcs Metal Shim Stock 316 Stainless Steel Sheet Shim Flat Sheets of Metal for Kitchen DIY Craft Making Marine Application 0.001 0.0015 0.002 0.003 0.004 0.005 Inch Thick 6 x 12 Inch

  • 316 Stainless Steel: this 316 stainless steel shim stock is made of 316 stainless steel material, which has corrosion resistance, rust resistance, high temperature resistance performance.
  • Wide Applications: this stainless steel sheet shim is bendable that can be machined or cut into various parts, such as metal shims, washers, spacers and more, and you can DIY crafts as well.
  • Proper Sizes: this stainless steel sheet metal is approx. 30.48 x 15.24 cm/ 12 x 6 inches (length and width), with various thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses.
  • Sufficient Quantity: please be careful not to cut your fingers and open the package carefully.
  • There are 12 pieces of stainless steel metal sheets in the package, enough for your various uses and replacements, 6 different thicknesses, 2 pieces each.
  • Practical Gifts: you can give this set of sheet of stainless steel to your family, colleagues and friends, and they will be very happy to receive such a practical and useful gift.
Check Stock

Valve Spring Shim Kit - 1.300\ OD.520\ ID .030\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1. 300" Outside Diameter, 0. 520" Inside Diameter. Includes 16 0. 030" Thick Shims..
  • Recommended for use with ~ 1. 300" Outside Diameter or smaller like our 26915 Beehive and 7228 Conical Spring..
Check Stock

EFI Fuel Injected Motorcycle Gas Tank Frisco Mount Shallow Tunnel 2.5 Gal Sportster Bobber Style Harley Davidson Nightster Iron Low Forty Eight SuperLow Chopper Custom XL 883 1200 XL883 XL1200 07-2020

  • Excellent Quality ( Not Made in China ) New Motorcycle Gas Tank Frisco Tunnel EFI Fuel Injected Harley Sportster 2007 to 2020 XL 883 1200 XL883 XL1200.
  • Frisco tunnel Utilizes stock fuel pump and Stock fuel cap, Rear of tank reduced 1” from stock.
  • 2.5 gal capacity / 15" long x 9.25" wide x 7.75" tall low shallow Frisco tunnel.
  • Thanks for Looking at our Quality items, Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
  • The Frisco style gas tank is a throwback to sixties show bikes. Sportster tank is a direct bolt on for 2007 and up Sportsters which use electronic fuel injection (EFI). The custom tank will use the stock fuel pump and gas cap and is a direct bolt on part. No drilling, welding or fabrication of mounting points is required. The notorious flat spot removed from the top of the tank. This is a Frisco mount tank so it will sit high up on the back.
Check Stock

JAVIKA 0.005 x 6 x 100 inches Brass Shim Stock Roll Half Hard Cold Rolled CDA 260 Brass Alloy for Hardware and Machine Maintenance DIY Projects Jewelry Crafts Electrical

  • Brass Shim Stock Roll is made from a half hard, cold rolled, CDA 260 brass alloy with Low Friction and Good Corrosion Resistant..
  • Sieze: 0.005" Thickness x 6" Width x 100" Length. We have 4 thicknesses to meet your different needs..
  • The half-hard copper and zinc alloy material makes the shim rust-resistant for long-lasting performance..
  • Brass Sim Stock's softness and low melting point make it suitable in a broad range of applications, particularly in machinery. They are useful in creating accurate alignments, leveling surfaces, filling gaps, and more..
  • This product is Made in Taiwan, and has been tested for quality and reliability. Packing with a carton box..
Check Stock

Cyleto Front Fork Oil Seal Kit 36mm x 48mm x 8mm for Kawasaki KZ750 KZ 750 1980-1982 KZ700 1984

  • Average horsepower increases of 15%-25%!.
  • Each DynoJet kit is precisely engineered to provide a simple and cost effective solution for all your riding needs.
  • Kit includes jets, needle, spring, shim and instructions.
  • Stage 1: stock engine/filters, stock/modified pipes.
  • Stage 3: stock/mild modified engine, stock/modified pipes, individual air filters.
  • drivability may be compromised, N/A for some motors.
Check Stock