Categories

Best Custom Mufflers

Borla 11826 Exhaust System for Jeep Grand Cherokee

  • Full stainless steel exhaust for maximum durability and corrosion resistance.
  • Custom aggressive mufflers tuned to generate the highest quality exhaust tone possible.
  • Straight through exhaust system to maximize exhaust flow and minimize backpressure to boost performance.
  • Full system is back up by a million mile warranty.
Check Stock

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,3.00" CENTER OUT,BLACK FINISH

  • Brand New Flowmaster Super 10 Series Chambered Muffler, 3.00" Center In, 3.00" Center Out, Black Finish (Holley Part #843015).
  • Super 10 Series 409S stainless steel, single chamber mufflers. Intended for customers who desire the loudest & most aggressive sound that they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel & fully MIG welded for maximum durability..
  • Features: Intended only for off-road or race applications | Delta Flow Technology | 409SS Stainless Steel Construction | Super 10 Sound Level.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

LA CHOPPERS LA-1220-24 2\ x 24\ Universal Baffle/Packing Baffle (Stainless Tube)

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 1.75" OD pipes (Baffle Diameter 1.6" - Length 8")003c/p003e.
Check Stock

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Delkevic Stubby 14" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Exhaust compatible with Yamaha FJR1300 13.5" Titanium XOval Muffler Slip On 01-05

  • Delkevic 13.5 inch *Stubby* x-oval titanium mufflers are made from high grade titanium. Along with adding a unique style and look, these mufflers are extremely lightweight,higher performance, and more durable than factory standard exhausts. They create a deep, crisp sound..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Universal Motorcycle Steel Baffle With Packing - Baffle Diameter 2.86\ - Length 8\ - For 3\ OD Pipe

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e 003cli003eAvailable for a variety of pipe sizes003c/li003e 003cli003eMay require drilling a hole in the exhaust pipe003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 3" OD pipes (Baffle Diameter 2.86" - Length 8")003c/p003e.
Check Stock

V-Twin 30-0372 - V-Slot Type Steel 2-1/4\ Pipe Baffle Set

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e 003cli003eAvailable for a variety of pipe sizes003c/li003e 003cli003eMay require drilling a hole in the exhaust pipe003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 2.25" OD pipes (Baffle Diameter 2 1/8" - Length 8")003c/p003e.
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Carbon Fiber Oval Muffler

  • Delkevic 18" carbon fiber oval mufflers are manufactured from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler has the quietest, deepest tone of mufflers we offer. This will be the closest sounding to stock available and best for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Stainless Steel Oval Muffler

  • Delkevic 18" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This muffler is has the deepest, quietest tone of mufflers we offer. It will be the closest sounding to stock and the best choice for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with DL10 with Stubby 14" Carbon Fiber Round Muffler

  • Delkevic DL10 14" carbon fiber round mufflers are manufactured from a pre-formed composite carbon fiber sleeve and 304 stainless steel. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Universal Motorcycle Steel Baffle With Packing - Baffle Diameter 1.85\ - Length 10 - For 2.0\ Outer Dimension Pipe

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e 003cli003eAvailable for a variety of pipe sizes003c/li003e 003cli003eMay require drilling a hole in the exhaust pipe003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 2.0" OD pipes (Baffle Diameter 1.85" - Length 10")003c/p003e.
Check Stock