Categories

Best Cut Off Blade Holder

BISupply Electric Rope Cutter Blade Hot 30W - 932-Degrees Fahrenheit Rapid Heat Hot Knife - Synthetic Rope Cutting Tool

  • Operate in a well-ventilated area to avoid inhaling fumes.
  • 4.75” x 4.2” x 3.1” inch (12.1cm x 10.7cm x 7.9cm) base, 2.1-inch (5.3cm) wide blade surface for finishing touches and melt fibers.
  • Includes brush with 5-inch (12.7cm) handle.
  • [Easy to Use]: Unscrew knife holder with the included T-bar hex key, place the 2 blade legs in the knife holder, tighten screws, then connect to an appropriate power connection.
  • To use, turn the power switch to the “on” position, place your material to be cut on the blade, and turn the power switch to “off” after cutting.
  • [Built to Last]: AC 120V, 60Hz, 30W power.
  • 932-degrees Fahrenheit (500°C) blade temperature.
  • Cuts and quickly heats to continuous high temperature (we recommend not leaving the hot knife cutting tool on for extended periods).
  • [Package Contents]: Package includes (1) fabric hot knife, (1) hot blade, (1) T-handle hex key, and (1) cleaning brush.
Check Stock

CARTINTS Paper Cutter with Hidden Knife Blade, Safety Wrapping Paper Cutter Safety Cutter Paper Trimmer for Adhesive Vinyl, Plastic Film, Craft Paper, Photo&Scrapbooking, 5.7X 0.6inch

  • WIDELY APPLICATION: A handy cutter for gift wrapping paper, tape, craft paper, wallpaper, vinyl wrap roll, window film, decals, stretch wrap, food plastic wrap, packaging bag, etc...
  • SAFETY CUTTER TOOL: The utility knife blade is hidden in the knife holder, which preventing direct contact between your fingers and the blade..
  • ERGONOMIC HANDLE: The curve of the knife handle that fits the palm of your hand, allows you to hold it comfortably and cut smoothly. The small wrapping cutter is easy to control, and convenient to cut out the size and graphics you want..
  • REPLACE BLADE EASILY: Hold the handle of the knife, and then pull the knife holder out to replace the blade. The replacement is snap-off 9mm utility knife blade..
  • EASY TO CARRY&STORE: You don’t have to worry about getting hurt even if you put it in your pocket. With the design the hanging hole, you also can store the wrapping paper knife easily..
Check Stock

Accusize Industrial Tools Gtn-4 PVD Coated Self-Lock Carbide Cut-Off Inserts, 0 Deg, Cutting Stainless Steel, 10 Piece Set, 2403-6005x10

  • Self-Lock Carbide Cut-Off Inserts, 0 degree Angle, cutting Stainless steel.
  • For cut-off and grooving, single-sided notation..
  • Work with Accusize cut-off blade NCIH26-4 (item# 2402-0008) and NCIH32-4 (item# 2402-0016).
  • 1" Heavy-duty Indexable Grooving Holder (item# 2415-5036).
  • Also work with Accusize 3/4inch self-lock cut-off tool (item#2410-0013).
Check Stock

YUNPICAR Mini Blade Fuse Holder 18 AWG Waterproof Connector Inline Fuse Holder with 5A ATM Fuses,2 Pack

  • Standard ATS 5A Blade Fuse ,Protecting circuits and electrical equipment. Easy to add additional circuits fit for cars, CD players, fax machines and etc..
  • High-quality :Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
  • Easy to use:Just directly plug to the existing fuse holder, 18 AWG 9.4in red pigtail wire allow you to cut and splice it into any project. Keep your car and electric device in a safe condition.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. To enhance moisture-proof and waterproof performance and NOT easy to fall off or let water in.
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 5A Mini Blade Fuse.
Check Stock

Harpow 13 Pcs Oscillating Blades Kits, Carbide Diamond Blades Sandpaper, Power Oscillating Tool Accessory, for Fein Bosch Craftsman Rockwell Ferm Pro-Line Matrix Tools

  • 2 pcs Harpow PU with Aluminum velcro sanding backer.
  • 1 pc Harpow Japanese teeth standard 2-1/2".
  • 1 pc Harpow 10mm stainless steel quick cut saw blades 1 pc Harpow Caulking cutter.
  • 1 pc Harpow Bi-metal E-cut saw blade with stainless steel holder.
  • 1 pc Harpow Universal standard E-cut 1- 3/8" saw blade.
  • 1 pc Harpow Precision Japanese blade with stianless holder, 65mm.
  • 1 pc Harpow Brazed carbide triangular grinding blade.
Check Stock

Harpow 7Pcs Oscillating Power Tool Accessory Kit Oscillating Blades, Carbide Blades, Diamond Blades, Multitool Blades,Wood Metal Cutting Blades for Fein Bosch Craftsman Rockwell Einhell Tools

  • 1 pc Harpow Bi-metal E-cut saw blade with stainless steel holder.
  • 1 pc Harpow Precision Japanese blade with stianless holder, 65mm.
  • 1 pc Harpow Brazed carbide grout blade 1/16".
  • 1 pc Harpow Standard 2-1/2" wide wood/plastic blade.
Check Stock

Philips Norelco SH50/52 Replacement Blades for Series AquaTouch and 5000 Shavers with Cleaning Brush - (Bundle)

  • ...des raises and cuts all hairs and remaining stubble - all in a few strokes (3 Shaving heads per packaging)..
  • SUPER LIFT &CUT: The dual blade system built into our electric shaver lifts hairs to cut comfortably below skin level for a closer shaving experience..
  • EASY TO REPLACE: (1) Pull the shaving head holder off. (2) Place the retaining ring holder on the retaining ring turn it anti-clockwise and lift it off the shaving head. (3) Replace the shavings heads with new ones. (4) Place the retaining ring on the shaving head using the holder and turn it clockwise to reattach. (5) Reattach the shaving head holder. (6) To reset the shaver press and hold the on/off button for more than 5 sec (Please see Description below for more information)..
Check Stock

Hot Knife Foam Cutter Hot Wire Styrofoam Engraving Tip 3 in 1 Tools Kit by Calcor

  • 3 Tools In 1: Cut or Engrave Foam Complete Tool Set..
  • CONTAINS: Three Tools In One, 14w High Power Foam Cutter With UL Approved Power Suppl y and On / Off Safety Switch, 10cm Wand Style Hot Knife, 1 Cm Crafts Engraving Tip, 16cm Bow Hot Blade, Replacement Wire For Bow, Cutter Holder,.
  • USES: Cuts Polystyrene, Pink Foam, Styrofoam With Ease. Custom Shape and Design Foam for Hundreds of Uses..
  • HOW TO: Heats Up In A Matter Of Seconds. Easy To Change Foam Cutting Tips, Simply Turn Off And Allow To Cool, Pull Foam Cutter Tip From Handle By Grabbing Black Plastic Base. Attach New Handle And Turn On..
  • TIPS: Allow The Cutter To Cut/Melt Into The Foam. Little To No Force Is Required To Cut Easily Through Foam. Don't Force The Cutter.
Check Stock

JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post & Holders Multifid Tool Holder

  • Material: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining..
  • This is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder.
  • Replace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved..
  • Set includes: 1x Tool Post 1x 3/8" boring holder, 1x 1/2" capacity cut-off blade holder, 2x 1/4-3/8" turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
  • Silver parts are made of aluminum, The black part is made of iron.
Check Stock

Cup Edging Tool Tumblers Level Line Drawing Edge Trimmer for Tumbler Craft Remove The Rough Edges and Make Level line

  • ...rgrated Level Line Drawing Can be Fit Almost Tumbler Edge Cuttiing And Easy Drawing level Line on Tumbler.
  • 2, Cup Edging Cutter With Adjustable Edge Cutting Range: 1/8inch to 1/2inch. This Tumblers Edge Trimmer Equiped with Handle Helps Easy To Cut . Anti-Slide Tumbler Bar design, No risk of Slide Cups. The Mark pen Holder Adjustable Height Range is 1 to 7.8inch(20cm) Help You Mark different Height Line on your Tumbler..
  • 3, How to Use: (1), Cut Edging : After applying the fabric on Tumbler, let it dry. keeping Tumbler pressed against the blade And Turning the tumber Arround, There will be straight cutting Line. Peel the fabric from the cup.You will get perfect straight edge. (2), Level Line Drawing :Install the Pen on Metal holder and adjust Pen Height To Determine the Line Postion You Want to Mark on the Tumbler. Keep Tumbler Against the Pen Head And Turning Arround, You will Get Perfect level line on Tumbler..
  • 4, How to Adjust the Height of Blade: Use wrench to unscrew the blade Cover, And Switch the blade and raiser position, the blade height can be up and down. There are four layer Raiser , Each Raiser is 0.12inch (3mm) You can find the right height you want to apply for your Tumblers. Caution: The Blade is very sharp please do not use your hands to....
Check Stock

RONGTER Electric Hot Knife Air-cooled Rope Fabric Foam Cutter with 8 Blades Hot Knife, Foam Cutter Cutting Tool for Cloth Ropes Belts Net Tube Foam Board Kt Board Leather Canvas

  • ...osion blades. Arc blade--cutting cloth, leather, ropes.
  • Sharp blade-cutting acrylic sheets, different shapes.
  • Shovel blade--cutting plastic tubes, ropes.
  • ✅【PURE COPPER HEATING MOTOR】The pure copper knife holder of our electric hot knife can help heat quickly, convenient and easy to operate, improve work efficiency. During use, if you want to stop using, you can use the metal hook to hang our knife, and then take it off when you are using it. Convenient and save space.
  • ✅【PACKAGE INCLUDES】RONGTER Cutting Tool Kits include a RONGTER heat cutter, 8 types of blades, a hard plastic case, a spanner, and a cleaning brush. The hot knife can cut fabric, canvas, rope, foam board, plastic pipes, etc. Ideal for commercial and industrial use, suitable for design, and DIY projects in the home, school, or workshop.
  • ✅【CLEAN AND SMOOTH CUT】RONGTER electric hot knives cut fabrics, rope, foam board smoothly and fast, seal the edges clean, and leave no debris!The sharp blade allows the edges to fuse quickly to avoid loose lines and achieve silky cutting.
Check Stock

Grizzly H5904 Clamp Type Cut Off Too Length No.2

  • Includes wrench and 1/8" x 3/4" x 6" M-2 cut off blade.
  • Overall tool size is 2-1/8" x 1-3/16" x 1-1/8".
Check Stock

VCT 130W HOT Knife Heavy Duty Cutter Plastic Foam Nylon 975 deg Adjustable Heat

  • 【FAST ! FUSION ! SMOOTH !】100W power, heating to 1112°F (600°C) in 6 s,can work continuously, and can also adjust the temperature steplessly.
  • The sharp blade allows the edges to fuse quickly to avoid loose lines and achieve silky cutting!.
  • 【Pro Knife Seat & Connection Frame】: Pure copper knife holder, more efficient heat conduction.
  • knife holder connected blades to protect the front shell of the host.
  • metal tail hooks are more convenient to hang and place.
  • compact integrated body, better holding feeling!.
  • 【Non-magnetic Nickel-chromium Alloy Blade*4 Types】 Strong high temperature resistance and corrosion resistance, R type--cutting cloth, leather, etc., used with the pressure plate to achieve padless cutting.
  • SHOVEL blades--removing dirt and cleaning surfaces, such as glue (search for ASIN: B07PQGJZYG on Amazon to buy a single blade)..
  • 【Industrial grade】It can be used to cut sponge, foam, plastic rubber acrylic board, carpet PVC pipe, synthetic fabric, rope braid, canvas, leather, and can also be used to clean up cork dirt. Easy and fluent! Save materials! Leave no burrs! Fast edge banding!.
  • 【Portable & Safe】 It weighs only 395g, and the 3m power cord makes it easier to....
Check Stock