Categories

Best Cut to length Machinery

uxcell R28 15mm x 30mm Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • External Size: 20x38mm(0.787x1.496 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R18 10mm x 20mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC

  • Internal Size: 10x20mm(0.394x0.787 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 15mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC 1 Hole

  • External Size: 20x23mm(0.787x0.906 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 40mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x40mm(0.59x1.574 inch)(InnerH*InnerW).
  • External Size: 20x49mm(0.787x1.929 inch)(OuterH*OuterW).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 20mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x20mm /0.59"x0.787" (InnerH*InnerW).
  • External Size: 20x28mm/0.787"x1.1"(OuterH*OuterW)Bending radius: R28.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines

  • External Size: 23x28mm(OuterH*OuterW)；Bending radius: R38.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Generic 2x Self Adhesive Steel Measuring Tape -metric 1M-0-1M - Middle to Both Sides

  • Brand new, the ruler is made of steel, with good hardness and durable use..
  • Used for workbenches, saw tables, machinery, desks, countertops, poles, walls, columns, Miter Saw,T-track,Miter Track Stop,Table Saw,Router Table,Band Saw,Woodworking Tools,etc..
  • Easy to use, Can be cut into different lengths according to their own needs, with self-adhesive..
  • Corrosion resistant design, double baking with good paint, scale is clear and wear resistant..
Check Stock

uxcell Extended Compressed Spring Wire Diameter 0.031\

  • Made of stainless steel material not easy to rust, more durable..
  • Tension spring can be used in many occasions, such as production and assembly, experiment, research and development, maintenance, etc...
  • Spring in the global market occupies an important position, are widely used, marine, computer, electronics, automotive, , , chemical, aerospace, railway, nuclear power, wind power, thermal power, engineering machinery, mining machinery, construction machinery, elevators, and other fields.
  • Package Content: 1 x Compressed Spring, Finished: Polished,Type：Dual hook.
Check Stock

10mm x 10mm Length 1M Black Plastic Open Type Cable Wire Carrier Drag Chain Towline R18 for 3D Printer and CNC Machines

  • The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • You can link the cables with each other to form one long length you need.
  • Surface gloss,Low temperature resistance, wear resistance and corrosion resistance.
  • Suitable for reciprocating motion in occasions, with built-in cables, pipes, water pipes, etc.
  • The Drag chain has been widely used in CNC machine tools,electronic equipments, fire machinery, stone machinery, glass machinery, doors and windows machinery, counting devices, electrical machines, etc.
Check Stock

uxcell Foam Rubber Weather Seal Strip, 16mm(5/8\) Diameter 2.5 Meters (8.20Ft) Long Round EPDM Rubber for DIY Gasket, Warehouse, Pads, Foam Tubing, Crafts

  • Outer Diameter: Rubber seal strip size is 16mm(5/8") Diameter 2.5 Meters (8.20Ft) Long.
  • Package Includes: 1Pcs Foam Rubber Seal Weather Strip.
  • Material: The foam rubber seal strip is made of EPDM rubber materials, and will not freeze or break under temperatures.
  • is shock-absorbing, has sound, and heat insulation, is anti-skidding, and will withstand repeated use..
  • Multi-Function: Weather stripping door seal drowns out noise, has a good cushioning effect, weather proof, oil resistance, chemical corrosion resistance, dust proof, shock resistance, sealing, moisture resistant, insulating, anti-vibration, anti-collision, and so on..
  • Flexible & Easy to Cut: This foam insulation tape can be cut easily, the foam rubber seal is easy to cut it off to get the length you need, and will bend and conform to any shape..
  • Wide Application: Seal strip has been widely used in automotive, electronics, chemical, instrumentation, machinery, and other industries and daily life..
Check Stock

Sunhokey 15x40mm 1-Meter Black Plastic Flexible Drag Chain Cable Wire Carrier Nested Semi Colsed Twist Chains for 3D Printer and CNC Machines (Inside Open) (15x40mm)

  • Easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • Surface gloss,Low temperature resistance, wear resistance and corrosion resistance..
  • Drag chains can be linked with each other to form one longer length you need..
  • Widely used for 3D Printers, CNC machine tools,electronic equipments, fire machinery, stone machinery, glass machinery, doors and windows machinery, counting devices, electrical machines, etc..
Check Stock

1M Drag Chain Cable Carrier R18 10x10mm(Inn HxW) Plastic Black Towline Wire Cable Chain Carrier for CNC Router Mill and 3D Printer,with Extra Connector,Screwdriver,Screws, Bridge Type(10x10）

  • 【Specification】Internal: 10 x 10mm/0.39 x 0.39inch(H*W).
  • External: 13.5 x 17.2mm/(0.53 x 0.68inch)；Total Length : 1M/39.4inch.
  • 【Extra】Extra one pair connector, can split the integral drag chain into 2 pieces to use.
  • Extra 8pcs screws, easy to fix the chain.
  • Extra Screwdriver, freely disassemble to change the length of the chain..
  • 【Multi-Applications】The black plastic drag chain cable carrier is suitable for the occasions of reciprocating motion, tow and protect the built-in electric cable, oil pipes, gas pipes, water pipes. It has been widely used for CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, Injection molding machine, manipulator, lifting and transportation equipment, Automated warehouses etc..
  • 【Flexible】Every segment can be removed and it could be combined with another length to make one long piece..
  • 【Performance】 Low noise, wear resistance, high-speed movement..
Check Stock

Aicosineg M6 x 12mm Male Thread Aluminum Alloy Adjustable Clamping Lever Handle for Machinery Welding Printing Equipment Black Tone 1pcs Not Include Washer

  • 【MATERIAL】- The adjustable clamping handle is made of high-quality aluminum alloy, with good durability and rust resistance, light weight and corrosion resistance.
  • 【FEATURE】- The adjustable clamping handle adopts superb craftsmanship, each edge can accurately lock the screw without damaging the screw.
  • Just lift the handle of these ratchet buttons to loosen the gear teeth and rotate freely for quick adjustment.
  • 【ADVANTAGE】- This handle is particular for the lever turning angle is limited, owing to lack of space, it is thr ideal tool for lever turning.
  • 【APPLICATION】- These handles are perfect to be used in application requiring frequent and quick adjustments and when working in confined areas.
  • It is widely used in the necessary parts of packaging machinery and equipment, universal knife sharpeners, machine tools, welding equipment, printing equipment, woodworking machinery, packaging machinery, dyeing equipment and other machinery.
Check Stock