Categories

Best Cut to size Tile

Transolid FL6030R-31 Linear 60-in W x 30-in L Rectangular Alcove Concealed End Shower Base with Right Hand Drain, White

  • ...er seat is attached with a waterproof membrane. The three-layer designed membrane keeps the water flowing on the surface of the tile, with no water accumulation. You will be amazed at the resistance to get moldy under the tile seat after you have experienced ours for countless years..
  • Cut-to-fit As Required: Product size: 38.2 x 11.4 x 20"/ 97 x 29 x 50 cm. The tile shower bench seat fits into the space of a standard bathtub. However, you can adjust the size of the tile hassle-free. If needed, you can saw from side to side to cut the dimension smaller. Just take your time and measure twice before cutting..
  • Effortless to Assemble: The shower tile bench seat is built for application in any shower installation or bathroom remodeling project. Simply place and secure the tile bench into the shower. Continue tiling the shower and shower bench. Get ready to have a sturdy tile seat in no time..
  • Enjoy Your Bathroom: The floating shower bench is a perfect shower washing kit in any bathroom. Whether you use the ready tile shower seat as a footrest or a storage shelf, it will fit in with room to spare. Let your bathroom become more and think of it as a place where you can relax after a long day..
Check Stock

VEVOR Tile Shower Seat, 38.2\ x 11.4\ x 20\ Tile Shower Seat, Factory Waterproof & 100% Leak-Proof Tileable Shower Corner Seat, 440lbs Loading Rectangular Board Shower Bench, Grey

  • ...er seat is attached with a waterproof membrane. The three-layer designed membrane keeps the water flowing on the surface of the tile, with no water accumulation. You will be amazed at the resistance to get moldy under the tile seat after you have experienced ours for countless years..
  • Cut-to-fit As Required: Product size: 38.2 x 11.4 x 20"/ 97 x 29 x 50 cm. The tile shower bench seat fits into the space of a standard bathtub. However, you can adjust the size of the tile hassle-free. If needed, you can saw from side to side to cut the dimension smaller. Just take your time and measure twice before cutting..
  • Effortless to Assemble: The shower tile bench seat is built for application in any shower installation or bathroom remodeling project. Simply place and secure the tile bench into the shower. Continue tiling the shower and shower bench. Get ready to have a sturdy tile seat in no time..
  • Enjoy Your Bathroom: The floating shower bench is a perfect shower washing kit in any bathroom. Whether you use the ready tile shower seat as a footrest or a storage shelf, it will fit in with room to spare. Let your bathroom become more and think of it as a place where you can relax after a long day..
Check Stock

DLBX 24 Pcs Tile Stickers Kitchen Adhesive Transfers Sticker for Bathroom Peel & Stick Self-Adhesive Decals Wall Decor Colorful Retro Style (8 x 8 inch)

  • Materials - The tile sticker is made of environmentally friendly PVC material, strong and durable, does not crack or fade, and has a fully waterproof and oil-proof design..
  • Realistic Look - Tile stickers can add an artistic touch to your home, tiles, walls, cabinets, drawers, cabinets and other smooth surface furniture. These are 2D flat Realistic printing self-adhesive stickers NOT 3D patterned tiles or Hard Tiles..
  • Easy to Use - This tile stickers with self-adhesive glue, Just peel & stick. can also be cut with scissors just need to peel and paste. If the size is not suitable you can be cut with regular household scissors..
  • Widely Use - The Tile stickers can be directly attached to walls, stairs, corridors, kitchen , bathrooms, fireplaces, laundry rooms and any flat and smooth surfaces. Decorate your home with these tiles stickers and give your home a new look..
  • Size & Included - Package included 24 pcs tile stickers .There are three size can be choose ----10cm/4inch,15cm/6inch,20cm/8inch.Can be combined according to your preferences to decor your home..
Check Stock

VEVOR Tile Shower Seat, 22.4\ x 16\ x 20\ Ready to Tile Shower Seat, Factory Waterproof & 100% Leak Proof Tileable Shower Corner Seat, 440lbs Load-Bearing Triangular Board Shower Bench, Grey

  • ...er seat is attached with a waterproof membrane. The three-layer designed membrane keeps the water flowing on the surface of the tile, with no water accumulation. You will be amazed at the resistance to get moldy under the tile seat after you have experienced ours for countless years..
  • Cut-to-fit As Required: Product size: 22.4 x 16 x 20"/ 57 x 40 x 50 cm. The tile shower bench seat fits into the space of a standard bathtub. However, you can adjust the size of the tile hassle-free. If needed, you can saw from side to side to cut the dimension smaller. Just take your time and measure twice before cutting..
  • Effortless to Assemble: The shower tile corner seat is built for application in any shower installation or bathroom remodeling project. Simply place and secure the tile bench into the shower. Continue tiling the shower and shower bench. Get ready to have a sturdy tile seat in no time..
  • Enjoy Your Bathroom: The floating shower bench is a perfect shower washing kit in any bathroom. Whether you use the ready tile shower seat as a footrest or a storage shelf, it will fit in with room to spare. Let your bathroom become more and think of it as a place where you can relax after a long day..
Check Stock

Keadic Glass Tile Cutter Tool Kit, Glass Breaking Pliers, Tile Cutter Hand Tools Set with 6mm Alloy Steel Blades, Spacers, Special Oil Bottles Tape Measure & Cut-resistant Gloves

  • Complete Glass & Tile Cutter Tools Set --- In this easy glide glass & tile cutter hand tools kit, you can get 1 glass tile cutter & 2 pieces 6mm premium alloy steel blades, 1 glass breaking plier & 3 spare spacers, 2 special oil bottles, 1 meassuring tape (1m/3 FT) and 1 pair of cutting-resistant gloves. Everything you need to cut glass, tile, mosaic, mirrors, diamond & minerals are included!.
  • Warm Tips --- The glass tile cutter tools can be used for cutting glass, mirrors, wall tiles, facing tiles, ordinary whole tiles, glazed tiles within 0.47 inches, but not for cutting whole body tiles, vitrified tiles, marble tiles and polished tiles. Please make sure that our cutter is suitable for your own tile type, to avoid affect your use..
  • Premium Glass Breaking Pliers --- Made of high grade steel, more durable and better rust-resistance, can be used to achieve a controlled break in the glass, tiles, resulting in a clean, right-angled cut edge. The extended swivel handle makes it easier for the user to release the force..
  • Steps of Cutting Glass/Tile --- Firstly, mark the cutting position with the meassure tape, then align the top of the glass or tile, use the glass cutter to cut a straight line with even force. Nextly, align the cut section of breaking plier ....
Check Stock

BAXIS Waterproof Carpet Squares Commercial Heavy Duty Carpet Tiles Peel and Stick Thick Splicing Floor Tile Mats for Home Office Commercial (Color : Style7, Size : 50Pcs)

  • 【High Quality】The carpet tiles is made of soft 100% Polypropylene, Kids and Pets friendly, heavy duty carpet tiles giving longer lasting life.
  • 【Anti-Slip】Asphalt backing of the tiles has high temperature non-deformation and anti-slip properties.Protects users from slipping.
  • soft to the feet, reduces noise and protects the floor.
  • 【DIY Size】size of each is 50*50cm.You can cut the strip carpet tile easily and set them into different shapes for installation according to your own purpose,especially small spaces or difficult rooms.Floor tile mat does not affect the opening of the door or the cabinet drawer.
  • 【Easy to clean】Our Carpet Floor Tiles has an easy wipe clean pile and are hard wearing, easy to lay and easy to cut to shape and size you want, any spills or damage simply lift and replace.
  • 【Self Adhesive Floor Tile】Easy to cut and trim with scissor or knife.
Check Stock

Waterproof Uncoupling Membrane,Orange Tile Underlayment Membrane for Bathroom Floor (150sq.ft)

  • ...ure.And create a isolation layer to the underground vapor. Cut off the path to the top tile covering.The vapor can only flow and dispear in the free space created by the uncoupling mat..
  • 【Easy To Use】-- These uncoupling membrane is flexible and cuttable. Easy to roll up and carry. if required, cut the mat to any size or shape for your tiling work. Suit for Various Substrates: Although it specifically designed for ceramic and stone tile installations, this uncoupling membrane also can be installed on the concrete, plywood, OSB, gypsum, vinyl floors, structural planks, sub-floors, radiant heated floors and etc. If you are not sure, please contact us..
Check Stock

Makita 2 Pack - 4” Continuous Diamond Blades For 4”+ Grinders & Circular Saws - Precise Cutting For Tile, Porcelain & Stone - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4” CONTINUOUS Diamond Blades For 1” Depth Cutting into TILE, PORCELAIN & STONE Applications | 4" x .79 x 5/8-Inch Arbor, Optimized for Makita 4” & 4.5" Angle Grinders & 4"+ Circular Saws and compatible with All 4” & 4.5" Angle Grinders & Saws.
  • ✅ CUT 3-4X MORE Tile, PORCELAIN, Stone than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for the best Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry | For Best Results, consider using Water to flush out debris and Extend Blade Life.
  • ✅ PRECISELY & EASILY CUT Marble, Granite, Stone, Glass, Porcelain & Ceramic Tile, including Flagstone & PermaBase with Minimal Material Crack OR Shatter Risk | TURBO & SEGMENTED Steel blades are ideal for FASTER and LONG-LASTING Cuts in General Concrete & Non-Tile/Stone Masonry.
  • ✅ AVOID BLADEWEAR Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear.
  • ✅ DESIGNED for Hard and Continuous use by professionals in const....
Check Stock

XUANINY Metal Backsplash Shiny Tile Peel and Stick Mosaics for Kitchen Backsplashes, 11.8

  • ????Easy to Install & DIY: Clean your wall first, make sure it’s no dust, water or oil, then peel and stick on walls, hygienic and save your time. Simply use scissors or utility knife to cut in-etween chips, or use chop saw or angle grinder with a metal cutting blade to cut the tile chips..
  • ????Size of Each Tile: 11.8″ x 11.8″ x 0.12″, there are 5 pcs tile, cover around 5 square feet. 7% extra wastage is recommended in every project..
  • ????Easy to Clean and Maintain: Can use detergent or water to clean. The tile’s surface is waterproof making it easier to clean the splash and oil stain..
  • ????It’s made of Aluminium on surface, Resistant to heat, crack and moisture, please not directly contact with flames or submerse in water. Your satisfaction and happiness are very important to us. If you have any questions or suggestions, please let us know..
  • ????Widely Use In Home Decor: Perfectly decorated in Kitchen island walls, bedroom walls, bathroom backsplash,stove decor, laundry room, furniture decor,fireplace decor,Washbasin etc.Affordable elegance for any contemporary, traditional or transitional rooms..
Check Stock

Leegol Electric 8 inch Bridge Tile Saw Masonry Saws

  • This versatile tile saw includes miter gauge and splash guard, long side Fence..
  • Cutting capacity to rip cut 25 inch or 28 inch with a plunge and cut 18 inch x 18 inch tile on a diagonal. Cut line indicator provide stable, accurate cutting to within 1/32 inch over 18 inch cuts..
  • Direct drive 1.1 HP, 3300 RPM induction motor is ideal for cutting marble, granite..
  • Up & Down system for Motor head, and this function can make the solt on the surface of tile, in order to prevent from the fall down..
Check Stock

Rubi Tools TX-1020 MAX with case 40' Professional Tile Cutter

  • SMOOTH & MULTI-ANGLE CUTTING:The tile cutter has a durable and replaceable tungsten carbide cutting wheel with deep groove ball bearings.It can cut smoothly while ensuring the smooth cutting surface of the tile. What's more, it is equipped with an adjustable scale, which can adjust the angle from 0° to 60°, fix the tiles and cut accurately..
  • STABLE & SOILD DOUBLE GULDE RAILS: With double solid guide rails, it is not easy to bend, strong and durable. The tile cutter is made of heavy-duty iron material, and both sides have anti-vibration wings, which can be used to fix and stable ceramic tiles.It can ensure the stability and solidity of the cutting process without falling over easily..
  • ERGONOMIC HANDLE:Ergonomic curved non-slip plastic handle. The finger socket design on the surface of the handle can ensure anti-skid and the comfort sense during grip the cutting process, while also saving energy. In addition, the non-slip bottom protective cover and movable support feet can provide stability while protecting the ground and knives..
  • SUITABLE FOR DIFFERENT TILES:The movable support feet increases the maximum cutting versatility. The tile cutter can handle a variety of ceramic tile types. Such as ordinary floor tiles, polished tiles, ceramic tiles, ce....
Check Stock

Rubi Tools 36 inch Wet Tile Saw DT-10IN Max

  • 36 inch rip cut and 25 inch diagonal cut will allow users to manage large tile with ease.
  • Powerful 15 amp motor to cleanly cut through the toughest tile.
  • The Python cooling system’s adjustable height brings water directly to the cut for improved blade cooling and a cleaner cut.
Check Stock

Makita 4100NH 4-3/8\ Masonry Saw

  • CUT TILE WITHOUT WATER: Never deal with the pain of cutting with a wet saw again! The iQRS244 offers easy transport, quick setup and breakdown with no slurry cleanup or water disposal. Q-Drive blade with Cool Cut Technology cuts cool while reducing vibration and movement..
  • BUILT FOR PROFESSIONAL CONTRACTORS: The 10” Q drive blades offer an innovative design. Combining the power of a top of the line tile saw with a powerful cyclonic vacuum that cuts clean, precise and efficiently to get the job done..
  • ONE TOOL FOR ANY JOB: Get the versatility you demand from tile tools. The iQTS244 is designed to cut ceramic, porcelain, marble and stone. Perfect for jobs inside or outside. With a 10” blade, full-width table and 24" cut capacity, the iQTS244 can handle even the trickiest and most technical tile jobs..
  • FULLY INTEGRATED DUST CONTROL: A revolutionary integrated dust containment system that captures 99.5% of dust. The 92 CFM high output vacuum starts automatically. The iQTS244 is 100% compliant with the new OSHA standard on respirable silica dust..
  • EFFORTLESS SETUP & CLEANUP: Finding a cutting location, setting up a water source with tarps and buckets, and disposing of slurry and contaminated water is a thing of the past. The iQTS224 provides easy transpor....
Check Stock