Categories

Best Cutting Sleeve Connector

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • ...ol enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma cutter with Non-HF Pilot Arc function (Not HF Pilot Arc) Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine).
  • Suitable Material:This plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm Alloy steel, 4mm copper, 8mm Aluminum. All the cutting thickness under the rate 220V 55Amps 60-75PSI, The cutting result may different depend on different voltage current and air pressure.
Check Stock

IWISS Battery Cable Lug Crimping Tool for 8, 6, 4, 2, 1, 1/0 AWG Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs with Wire Shear Cutter

  • Large Wire Crimper: HX-50BI battery cable ring terminal crimper is designed to crimp 8, 6, 4, 2, 1, 1/0 gauge battery lugs, making secure connection with cables, electrical appliances, and other power mechanisms in harsh-duty environments..
  • Rotating Die Set: EDM cutting dies are more dimensionally accurate than stamped dies, prevent inaccurate crimps. Compact rotation die for effortless die changing. Size Coded Crimping: When properly crimped, the die code number will be embossed on the connector for easy inspection to determine if correct die and connector combination were used..
  • Hex-Crimp Result: Hexagonal crimping is a strong mechanical connection, creating large area of high pressure contact between cable and connector which in turn results in low resistance and high pull-out values..
  • Applications: Commercial Vehicles include emergency vehicles, generator sets (Gensets), recreational vehicles, trucks, cranes, and lifting equipment..
  • LK-60A Cable Cutter: Made of chrome vanadium steel with induction-hardened & beveled cutting edges for maximum strength and durability. Shear-type jaw for easily cutting through aluminum and copper cable up to 1/0 AWG. Not for use on steel or ACSR type cable..
Check Stock

SÜA Oxygen and Acetylene Gas Cutting, Welding and Heating Set - Medium Duty Torch - Plastic Box - Model: Wyvern V

  • This Set includes: Oxygen and Acetylene Regulators, Medium Duty Torch with Model: 3-101-1 Acetylene Cutting Tip Compatible with Victor, 3 x W-1 series Welding Tips, Heating Tip, 15 feet Twin Hose, Single Flint Striker, Oxyfuel Goggles, Tip Cleaner and Spanner..
  • Can cut up to 6” with additional tips and up to 1” with the provided #1 tip. – Can weld or braze up to 1/2” with additional tips and up to 1/16” with the provided tips..
  • Acetylene Tank Connector: CGA-510 Fits Big Acetylene and Propane tanks EXCEPT Small Sizes MC and B (check all pictures for reference) - Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • Cutting attachment is compatible with Victor series 3 Acetylene and 3-GPN Propane Cutting Tips and Series 100 Handles. The Torch Handle is Compatible with W-1 Acetylene Welding Tips, MFA-1 Series Acetylene and MFN-1 Series Propane Rosebud Heating Tips..
  • This heavy-duty oxyfuel cutting and welding set is manufactured using high quality, strong materials. Durable and sturdy it is perfect for amateurs, DIY´s metalworker, or seasoned professionals, for industrial, farm, or home applications. Can be used on various processes such as welding, soldering, brazing, riveting, cutting, hard-facing and metal heating process..
Check Stock

SUNGATOR 1/4-Inch Brass Female Industrial Coupler, 10-Pack NPT Female Quick Connector Air Coupler with Storage Case

  • 【PREMIUM MATERIALS】: 6 Ball bearings. Made of solid brass, great for corrosion resistance and use of a longer life.
  • 【KNURLED SLEEVE】: A better grip when connecting and disconnecting.
  • sleeve guard helps reduce the risk of accidental disconnects and protects the coupler sleeve.
  • 【CONVENIENT STORAGE】: These brass air quick connector couplers are all well organized in a solid plastic case, easy for storage and carrying out for work, free of worry about losing fittings after handling. This pack is of top quality for daily use and can meet needs of heavy users..
  • 【CONNECTOR TYPE】: Industrial type, also known as M/D type, compatible with industrial/M/D type air plugs, air quick connector.
  • 【PRODUCT SIZE】: 1/4 inch NPT female thread × 1/4 inch body size, interchangeable with most manufacturers.
Check Stock

Plasma Cutter Machine,MYYWELD Dual Voltage 110/220V 50A，Portable Air Plasma Cutting Equipment Max Cutting Thickness 15mm,IGBT Inverter 1/2\ Clean Cut, High Frequency Cutting

  • ...ed for automotive, ducting work, repair/maintenance, metal processing, manufacture..
  • Accessories-User guide, 1pcs PT31 cutting gun(5M), 1pcs ground clamp(2M), 1pcs transparent hose(3M), 1pcs conversion line, 4pcs hose clamp, 2pcs electrode, 2pcs copper nozzle, 1pcs pressure value, 1pcs pressure reducing value outlet connector, 1pcs pressure reducing value inlet connector..
Check Stock

Downspout Extender, 2 Pack Drain Downspout Extender, Retractable Rain Gutter Drainage Pipe Down Spout Drain Extensions Gutter Connector Rainwater Drainage Gutter Accessories (White)

  • Telescopic: This rain gutter extension pipe can be telescoped, and the length can be adjusted according to the needs, which is convenient to use..
  • Quick Installation: This DIY friendly extension does not require cutting or trimming, and a removable adapter allows you to quickly and easily connect it to an existing downpipe..
  • Flood Prevention: Enjoy cleaner lawns and courtyards, this economical downspout extension sleeve helps prevent flooding, erosion and expensive maintenance..
  • Good Elasticity: Our downspout extension slot connector is thicker than other connectors, more durable, less prone to deformation, good elasticity, and less prone to cracking..
  • Keep Ground Dry: The gutter downpipe extension can easily extend from 20in to 59in to divert unwanted rainwater from your ground when connected to the downpipe..
Check Stock

HYXUAN 39112-SNA-A01 Audio Connector, Auxiliary Input Jack Aux Port Replacement Compatible with Civic 2006 2007 2008 2009 2010 2011

  • ☆ Fitment: Fits 2006 2007 2008 2009 2010 2011 Civic Audio / Video Jack / Auxiliary Jack, 5-Pin..
  • ☆ OE for Reference: 39112-SNA-A01/39112SNAA01.Direct replacement for a proper fit,correct Connector no cutting or splicing..
  • ☆ High Quality: Add black glue on the circuit board for waterproof.Issyzone aux adaptor is exceeding original OE standard..
  • ☆ Easy Installment: Plug and play.Direct replacement for a proper fit,correct Connector no cutting or splicing..
  • ☆ If case you meet problem with our products, please contact us first before feedback and review. We will assure you will get the best solution and service. Your encouraging review and feedback really increase our service level and passion of work..
Check Stock

CURT 51457 Quick Plug Electric Trailer Brake Controller Wiring Harness, Select Ram 1500, Classic, 2500, 3500, 4500, 5500

  • EASY TO INSTALL. No cutting or splicing required! This vehicle-specific wiring harness allows fast, easy, plug-and-play trailer brake controller installation. NOTE: Software in vehicle must be updated by dealership to accept an aftermarket controller.
  • RELIABLE POWER. This brake controller wiring harness is constructed with quality 12-gauge wires to ensure consistent power between your trailer brake controller, vehicle and electric trailer brakes.
  • VEHICLE-SPECIFIC. This electrical brake controller wiring fits select model years of the Ram 1500, 1500 Classic, 2500, 3500, 4500 and 5500 (without factory integrated brake controller - ITBC).
  • VERSATILE USE. This trailer brake controller wiring kit is compatible with any CURT trailer brake controllers equipped with a quick plug connector -- proportional, inertia and time delay. It also features a 24-inch length for flexible positioning.
  • PROTECTED WIRES. To keep power flowing and ensure your connection stays well-protected, this trailer brake controller harness comes with a slit-loom sleeve, helping to keep the wires bundled, avoid crushing and resist abrasions.
Check Stock

Jokari 61000 Quadro The Pliers with 4 Functions

  • Has four different functions: Cutting – insulation stripping – twisting – crimping.
  • No adjustment necessary for all different cross-sections of the working range.
  • This tool is the perfect synthesis of ergonomics and functionality for fast and precise crimping of connector sleeves from rolls.
  • Quick reloading of connector sleeves by switching magazines.
Check Stock

Mardatt 108 Pcs 15 30 45 Amp Quick Disconnect Power Terminals Connectors and PVC Flame Retardant Connector Sleeve Cover Kit Red Black Battery Modular Connector Set

  • 【What you Get】 The quick modular connectors assorted set contains 16 pcs 15A red& black power connector, 16 pcs 30A red & black power connector, 16 pcs 45A red & black power connector, 48 pcs silver plated copper contacts(16pcs-15Amp, 16pcs-30Amp, 16pcs-45Amp)and 12 pcs cover flame retardant sleeve, totally 108 pcs..
  • 【Reliable Disconnect Terminal】Made of silver plated metal, it provides the lowest electrical resistance, high current minimum and more power. The housings are modular and genderless that make sure assembly easily. Secures individual connectors in "Keyed" assemblies that prevent connection errors with similar configurations. Decent fit & finish.
  • interoperable with An***son brand connectors..
  • 【Black and Red Housing】 The terminal connector features with color-coded plastic cover, provides a visual identification of the compatible connector which will be matched with each other well, making sure the alignment of positive and negative cables..
  • 【Practical Sleeve Cover】Made of high quality PVC material with excellent flame retardant and Insulation protection.
  • Safe to use. Dimension-8*15*40mm. The size is perfect for the terminal connectors, providing the convenience of installation..
Check Stock

Wintergreen Lighting Rope Light Accessories (L-Connector)

  • L CONNECTOR for use with Wintergreen Lighting 150' rope light spools only (incandescent or LED). Allows two rope light runs to connect together in one 90-degree corner (an "L" shape)..
  • FOR USE WITH WINTERGREEN LIGHTING 150' ROPE LIGHT PRODUCTS ONLY. This connector is not designed for use with other brands of rope light, nor with other products. Please purchase ONLY if you plan to use with Wintergreen Lighting 150' rope light spools..
  • FOR USE WITH 150' ROPE LIGHT SPOOLS ONLY (LED or incandescent). This connector is not designed for use with 18' rope light kits because it requires cutting and splicing the rope light, and 18' rope lights cannot be cut. This connector is for use with Wintergreen Lighting 150' rope light spools only (LED or incandescent)..
  • The splice pins required for connecting to rope light are included..
  • Combine with other Wintergreen Lighting rope light accessories to create custom rope light designs in almost any configuration. "T," "Y," and "X" connectors are also available (sold separately)..
Check Stock

Wahl - Extreme Grip Pro Complete 24 Pieces Haircutting Kit

  • Taper-Lever adjusts for blending and customized cutting lengths..
  • Ultra Power - Long lasting motor delivers exceptional power for no-snag cutting..
  • 12 - Secure snap attachments for goof-proof cuts..
  • Rugged protective soft grip sleeve. No-slip grip sleeve.
  • 24 piece kit includes hair clipper, clipper silicone rubber sleeve, clipper blade cover, 12 attachment guards (#1 - #8, #1/2, #1-1/2, left & right ear tapers).
Check Stock

Insignia 1/4'-to-3.5mm Mini Headphone Jack Adapter - Black

  • Perfect for replacing worn out plugs for headphones or making a cable to a desired length or replacing a broken connector..
  • Easy to handle,you really don't have to be a professional to do this. Just insert the cables in the hoops, twist and lock in place, and only then solder..
  • Suitable for the cable up to 5mm, if your cable is too thin, just use some sleeve to hold it properly to avoid the movement.
  • Package include: 4 Pack connector + Some shrinkle tubing.
Check Stock