LENOX Tools Jab Saw Folding 20997TFHS618636
- 【Portable Folding Saw】The KERYE pocket folding saw is small and portable, the flush cut saw is only 6.3 inches after folding, suitable for....
- 【Flat Cut】The KERYE hand saw is made of High temperature quenching and has a 3-sided serrated sharp sawtooth to make the cut flat..
- 【SK5 Blade】KY03 is 5.5 inch long, 0.23 inch thick, double-sided serrated 13 & 14T. The hand saw is made of high quality SK5 steel, which is far....
- 【Double Edged】This wood saw has two sides with different shaped teeth, triple-beveled teeth for cutting hard woods such as oak, ebony and pine.
- 【High Quality Handle】The handle is made of ebony, which has higher wood strength than other materials and is less prone to cracking. Folding saw....
Check StockJones Stephens S49005 E-Z Stroke Pipe Saw 8” Pipe Saw
- Hand Saw: This E-Z Stroke Pipe Saw is a convenient, lightweight hand saw with a comfortable ergonomic handle. It can easily be used to cut plastic,....
- Pull-Stroke Saw: Jones Stephens’ E-Z Stroke Pipe Saw is one of the most convenient and easy-to-use cutting saws. With razor sharp teeth, the....
- Flexible Blade: The saw features a highly flexible blade that allows for flush cutting without marring adjacent surfaces..
- Razor Sharp Teeth: The tri-edge ground teeth cut through material like a knife, which makes this saw the go-to for all your cutting needs..
- Replaceable Blade: If you need a smaller blade or your blade is dull or damaged, the orange handle accepts all Jones Stephens E-Z Stroke Saw blades.....
Check StockJapanese Saw Hand Saw Ryoba Double Edge Pull Saw Interchangeable Flush Cut Saw 10 Inch Flexible Blade Handsaw for Woodworking orange
- ⚒️ Japanese Saw 22-1/2" Hand Flush Cut Ryoba Pull Saws Flexible Double Edge 10" Blade Impulse Hardened Steel Teeth for Woodworking..
- ⚒️ The Pull Saw is made of SK5, quenched and tempered good toughness, stronger and more durable.Japanese saws cut materials via pulling, thus they....
- ⚒️ The japanese razor saw 10" Double Edge Ryoba Hand Saw has a blade length of 10inch and a 12.5 inch Ergonomics TPR handle. In comparison to....
- ⚒️ A fast, sturdy universal saw - ideal for deep cuts both across and with the grain - in the workshop or building site..
- ⚒️ One side for ripping, the other for crosscutting, now you only need one saw for all general woodworking tasks..
Check StockIRWIN Dovetail Saw 10-Inch 2014450
- This dovetail saw uses a spring-loaded, reversible blade that can be used for left- or right-cutting.
- The ProTouch handle on each jamb saw provides ergonomic comfort.
- A Wide-Body Flush-Cut blade on this dovetail saw measures 50 mm.
Check StockDremel MM492 Universal Quick-Fit Cutting Assortment Pack, 3-Piece , Black
- WHAT'S INCLUDED: (1) MM480 1-1/4" Wood Flush Cut Blade (1) MM482 1-1/4" High Performance Bi- Metal Flush Cut Blade (1) MM450 3" Wood and Drywall Saw Blade.
- 15X LIFE BI-METAL MATERIAL: MM482 Bi-metal blade in wood with nails provide up to 15X life vs. standard bi-metal oscillating blades in wood with nails.
- FLUSH CUT BLADES: Designed to make precise cuts to allow for installation of flooring or wall trim.
- PERFECT FOR: Wood (MM480) and Metal (MM482) applications with flush cutting capabilities. The MM450 ideal for cutting openings in flooring for venting, repairing damaged flooring and cutting openings for electrical boxes.
- UNIVERSAL COMPATIBLE SYSTEM: Dremel Universal Quick-Fit interface allows for our blades to fit nearly every oscillating tool on the market including Dremel, Bosch, Makita, Milwaukee, and Rockwell.
- USA BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI.
Check StockBora QuickCut Circular Saw Guide with Rail & Angle Assist All-In-One Woodworking Tool 530416
- One tool, countless uses: the Bora QuickCut does the work of multiple tools, All with one useful saw guide. The multiple angles on this circular saw....
- Mark, measure, and cut with ease: save yourself the calculations of a typical tri-square with bora’s advanced cut guide. Measure perfectly flush....
- Easy grip: The large, curved handle provides extra comfort and precision. With the QuickCut, you can get a firm hold on your circular saw without your....
- Durable: Bora’s QuickCut saw guide is made with strong aluminum extrusion and conveniently placed ruler marks. It's 16 inches long, with a 14-inch....
- Bora Quality: Bora tool is a leader in innovative power tool accessories that make your jobs and projects run smoothly..
Check StockHand Saw, KERYE Hand Tools, 5.5 Inch Mini Pocket Folding Saw, SK5 Blade Wood Saw, Woodworking Tools, 13/14 TPI Double Edges Pull Saw, Flush Cut Saw for Wet/Dry Wood, Christmas Gifts for Men- KY03
- 【Portable Folding Saw】The KERYE pocket folding saw is small and portable, the flush cut saw is only 6.3 inches after folding, suitable for camping, outdoor..
- 【Flat Cut】The KERYE hand saw is made of High temperature quenching and has a 3-sided serrated sharp sawtooth to make the cut flat..
- 【SK5 Blade】KY03 is 5.5 inch long, 0.23 inch thick, double-sided serrated 13 & 14T. The hand saw is made of high quality SK5 steel, which is far superior to ordinary spring steel in terms of working life and metal elasticity..
- 【Double Edged】This wood saw has two sides with different shaped teeth, triple-beveled teeth for cutting hard woods such as oak, ebony and pine.
- double-beveled teeth for cutting soft woods such as white cedar, paulownia, used for Cutting wet wood, dry wood, PVC, etc..
- 【High Quality Handle】The handle is made of ebony, which has higher wood strength than other materials and is less prone to cracking. Folding saw with safety latch, can prevent accidental injury by the saw teeth..
Check StockArmour Line RP77171 Internal Plastic Pipe Cutter, 1-1/4 in Or Larger Diameter (Single Pack)
- PLASTIC PIPE CUTTER – Resists rust, corrosion and streaking and comes in a beautiful chrome plated finish..
- STEEL CUTTER BLADE – Saw tooth hardened steel cutter blade cuts plastic pipe from 1-1/4 in. in diameter..
- ATTACHES TO POWER DRILL – Steel shaft attaches to power drill..
- FLUSH CUT – Allows for a flush cut to the ground..
- REQUIRES – Use on plastic pipe only. Requires a power drill for use..
Check StockStadea SBD103C Diamond Saw Blade 5-Inch Continuous Turbo For Grinder - Granite Dry Cutting, 8 MM Segments
- Stadea Series Standard G - 5" Turbo continuous Diamond Saw Blade designed for Granite dry cutting.
- Built with high quality diamond with less wide turbo segments for smooth faster cut to avoid chipping on Granite and other hard stone dry cutting.
- 8 MM high thick segments for smooth cut and longer life, Max RPM 12000.
- Smooth cuts on Granite and other hard stone, A real time saver for professional stone fabrication.
- Quad hole to connect flush cut adapter for flush cuts, 5/8" to 7/8" arbor hole.
Check StockIRWIN Dovetail Saw 7-1/4-Inch 213104
- Use this dovetail saw for interior trim work and detailed work around windows.
- The flexible blade on this pull saw is also great for flush cuts on dowels.
- A polymer handle on these dovetail saws is comfortable and durable.
- 22-pt. tooth count gives a smooth, even cut.
Check StockLynx 4' One Man Crosscut Saw
- Two man saw is a saw designed to cut wood perpendicular to wood grain. When cutting logs, crosscut saw one man saves more time and effort than axe..
- The sharp saw teeth of the two person saw are used for push-pull stroke cutting, and the log saws uses special teeth called "rakes" to clean the cut sawdust..
- In practice, the manual logging saw has certain advantages over the gasoline-powered saw, and the crosscut saw is much lighter than the electric saw..
- Two man Crosscut saw adopts high-strength 1.5mm thick high-strength steel, and "D"-shaped comfortable handle, which is beneficial to fast cutting..
- Each one man crosscut saw comes standard with an auxiliary handle, which can be used by one person to assist cutting or used by the second person..
Check StockStadea SBD103A Diamond Saw Blade 5-Inch Continuous Turbo 10 MM Segments For Grinder Granite Quartz Dry Cutting
- Stadea Series Standard A - 5" Turbo continuous Diamond Saw Blade designed for Granite and Quartz dry cutting.
- Built with high quality diamond with turbo segments for smooth faster cut to avoid chipping on Granite and Quartz.
- 10 MM high segments for smooth cut and longer life, Max RPM 12000.
- Smooth cuts on Granite and Quartz, No need to change blades across materials, A real time saver for professional stone fabrication.
- Quad hole to connect flush cut adapter for flush cuts, 5/8" to 7/8" arbor hole.
Check StockSPARKWHIZ Recessed D-Ring Tie Down Anchor Kit, 4 Pack Trailer D Ring Tie Down Anchor Heavy Duty with Hole Saw Drill for Trailer Cargo Truck Flatbed Pickup (6,000 lb. Capacity)
- What's In The Package: 4 sets of D-rings and backing plates and 1 Hole Saw Drill. No need to buy a hole saw extra, save your time and money..
- MAX LOAD 6000LBS: It's up to 6000lbs straight pull capacity for each flush mount tie down anchor..
- WIDELY USED IN TRANSPORTATION: Great bearing capacity of heavy-duty D ring tie down anchors, makes it so essential for trailer floor, flatbeds, pickup truck bed..
- FOR CARGO SECURITY: The recessed trailer tie down anchors are bolted into the trailer bed and they are lifted upward to tie down cargo stably while lies flush in the pan when not in use..
- FULL-KIT PACKAGE: 4 sets of D-rings and backing plates with all needed bolts, nuts and washers included. Any questions, please feel free to contact us..
Check Stock