Categories

Best Cyclone Dust Collector

Cyclone Dust Collector 2.0” DIY Dust Separator Extractor with 2 Filters, Shop Dust Collector Accessories Cyclone Vacuum Cleaner Filter, for Woodworking, Ash, Metal Shavings, Grain etc

  • DIAMETER 2.0”: 2″ OD inlet (connects to your tools) and 2″ OD outlet (connects to your collector). If the size of the hose is too small, you can heat the hose and then put it on the diameter of the dust collector. The diameter of the air inlet and outlet of our dust collector is 2.0”, if you are 1.25”, 1.5”, 2.5” or other caliber vacuum cleaners, you can buy a caliber converter yourself. Total dimensions are approx. 30 cm (H) x 14cm (W). Very compact and space-saving..
  • FILTER : No. 1 filter element: Through Hole (For woodworking sawdust, dust, etc.), filter element with large holes at the bottom, No. 2 filter element: Blind Hole (Only for ash), filter element without large holes (need to be equipped with a motor above 1200W). Only applicable to ash, such as: stove ash, grass ash and other burning residues (To avoid blockage, remember not to use it in other scenarios)..
  • SUITABLE for STURDY BUCKET: Because our product has a good seal, we hope you can notice that when the vacuum cleaner is sealed with the bucket, the suction will be very strong, thinner barrels are relatively difficult to withstand strong suction, so it is more prone to the deformation of the bucket. In this case, it is only necessary to replace the bucket with a strong....
Check Stock

DCT Cyclone Wood Saw Dust Collection Garbage Trash Can Lid – Woodshop Dust Separator Lid for Woodworking Collector Tools

  • ENHANCED DUST COLLECTOR EFFICIENCY: Use the DCT Cyclone Wood Saw Dust Collection Garbage Can Lid – Woodshop Dust Separator Lid for Woodworking....
  • USE YOUR TOOLS: Fits most 30-gallon metal trash cans for best seal.
  • Can outside diameter must be between 19 inches (48.3cm) and 20.75 inches (52.7cm).
  • VARIOUS APPLICATIONS: Create a vacuum system and use to build a dust separator for your woodworking power tools by placing in front of your dust....
  • BUILT TO LAST: Constructed from rugged ABS plastic for reliable strength and longevity.
  • Features a foam gasket for a superior seal.
  • EASY TO USE: Place the included curved elbow fitting on the input intake side (to the Jointer) of the cyclone can and your dust collector on the....
Check Stock

Heroines

  • ...nction: The 2.0 HP, 9.8 Amp low noise motor creates a powerful 1059 CFM airflow to exhaust dust and purify the air. Sound Rating: 73 dB. After using, a clean work environment will come back again..
  • Advanced Separation Technology: The cyclone system of this woodworking dust collector allows larger wood chips to fall and be caught in the collection drum, while finer wood particles are circulated into the filter. This achieves a better purification effect..
  • Large Capacity Bags: The 13.2 Gallon/50 L Collection Drum has quick-release levers and independent casters for easy emptying. The canister filter captures 99% of 3-micron particles, significantly increasing filtration effectiveness. The directly-mounted feature is time-saving and labor-saving..
  • Flexible and Portable: The dust collection system features a 6-inch inlet with a removable Y-fitting with two 4-inch openings, which can be used to branch lines to service more than one machine. A 78.7 inch/2 m flexible hose ensures your long-distance work. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement..
Check Stock

POWERTEC 70301 Dust Collection Cyclone Separator Lid Kit w/Flexible Hoses Clamps 2 1/2 inch Elbow & Couplers for 2 Stage Dust Collector

  • KIT INCLUDES: (1) Two Stage Cyclone Separator Lid, (1) Dust Port Elbow, (2) 3’ Flexible Hoses, (2) Quick Coupler Connectors, (2) Hose Clamps.
  • FUNCTION: Cyclone dust collection systems cause a vortex action to trap and collect dust & debris inside the bucket/ barrel before it enters the vacuum, helping to prevent a reduction of suction power..
  • FEATURES: Lid possesses a foam gasket for a tight and reliable seal, elbow fitting on the inlet side to promote cyclonic air flow, ultra flex hoses that expand from 10” to 38-3/4 inches – giving you project versatility and leverage to maneuver your way around workshop machines and space.
  • APPLICATION: Quickly and easily converts your shop vacuum and standard five-gallon buckets container into a 2-stage cyclone dust collection system. Provides the necessary fittings required to connect a shop vac with a 2-1/4” ID inlet to a 2-1/2” OD diameter machine port. Perfect for woodworking, CNC machining, workshops and more.
  • PREMIUM: All cyclone dust collector components (excluding stainless steel hose clamps) are made with super lightweight clog-free ABS plastic material known for its temperature resistance and long-term durability.
Check Stock

POWERTEC 70293 Cyclone Dust Collector and Separator Kit w/Clear 6 Gallon Dust Bucket, Hoses, Reducers, Couplers and Hose Clamps

  • INCLUDES: Dust Separator, 6 gallon dust & debris bucket, expandable vacuum hose, reducers, couplers, hose clamps and more.
  • APPLICATION: Cyclone separator kit connects to your shop vac and tool dust collector ports and provides you with a complete assortment of components designed to capture and prevent wood chips and shavings from damaging your system.
  • VERSATILE: Reducers and couplers work with most brands and dust collection systems, accommodating tools such as planers, drum sanders and jointers - Has everything you need to optimize your 2 stage dust collector set-up.
  • EASY TO USE: Whether you’re connecting the separator directly to the dust collector, shop vac or tool dust port, you’ll find that it sets up quickly and easily while generating great separation.
  • PREMIUM: All included parts are made from durable, high quality and temperature/heat resistant material with an anti-clogging design for optimal efficiency.
Check Stock

VEVOR 2 HP Dust Collector, Portable Cyclone Dust Collector, 1,500 CFM Woodworking Dust Collector with 13.2-Gallon Collection Drum and Mobile Base, 220V Dust Collection System 3-Micron Canister Kit

  • Excellent Suction Function: The 2.0 HP, 9.8 Amp low noise motor creates a powerful 1059 CFM airflow to exhaust dust and purify the air. Sound Rating: 73 dB. After using, a clean work environment will come back again..
  • Advanced Separation Technology: The cyclone system of this woodworking dust collector allows larger wood chips to fall and be caught in the collection drum, while finer wood particles are circulated into the filter. This achieves a better purification effect..
  • Large Capacity Bags: The 13.2 Gallon/50 L Collection Drum has quick-release levers and independent casters for easy emptying. The canister filter captures 99% of 3-micron particles, significantly increasing filtration effectiveness. The directly-mounted feature is time-saving and labor-saving..
  • Flexible and Portable: The dust collection system features a 6-inch inlet with a removable Y-fitting with two 4-inch openings, which can be used to branch lines to service more than one machine. A 78.7 inch/2 m flexible hose ensures your long-distance work. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement..
  • Wide Application: The cyclone dust collector is widely used in industries, such as machinery, textile, household appliances, food, coal, building mate....
Check Stock

VEVOR 1.5 HP Dust Collector, 647 CFM Portable Vortex Dust Collector, Woodworking Dust Collector with 13.2-Gallon Collection Bag and Mobile Base, 220V Dust Collection System 25-Micron Canister Kit

  • Excellent Suction Function: The 1.5 HP, 7.1 Amp low noise motor creates a powerful 647 CFM airflow to exhaust dust and purify the air. Sound Rating: 73 dB. After using, a clean work environment will come back again..
  • Advanced Separation Technology: Vortex cone technology of the cyclone dust collector improves chip separation and packing efficiency. The two-bag system drops the heavy chips into the lower bag, then sends the dirty air through the top bag (filter), giving cleaner air back..
  • Large Capacity Bags: The 13.2 Gallon/50 L Collection Drum has quick-release levers and independent casters for easy emptying. The canister filter captures 99% of 25-micron particles, significantly increasing filtration effectiveness. The directly-mounted feature is time-saving and labor-saving..
  • Flexible and Portable: The dust collection system features a 6-inch inlet with a removable Y-fitting with two 4-inch openings, which can be used to branch lines to service more than one machine. A 78.7 inch/2 m flexible hose ensures your long-distance work. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement..
  • Wide Application: The cyclone dust collector is widely used in industries, such as machinery, textile, household appliances, food, coal....
Check Stock

Pine Ridge

  • ...oming experience even more enjoyable..
  • 【Gospel for lazy people】Cyclone filter and stainless steel filter prevent tangling and sticking, the dust box capacity is up to 2.5L, plus 2-stage HEPA can filter more than 99.99% of dust, dander and parasites.
  • one finger The hair collector can be opened to complete the non-contact cleaning of the hair collector without too much cleaning..
  • 【12-Month Warranty】Each PAWHAUS dog grooming kit and vacuum is rigorously inspected before leaving the factory to ensure that it performs to the extremely high standards we set! Every semiconductor, accessory, cable, electronic board and all spare parts are thoroughly inspected and tested to ensure robustness and durability..
Check Stock

Skil 7492 Sander Replacement 5' Hook & Loop Backing Pad # 1619P05797

  • POWERFUL - With a 2.8 amp motor and 13,000 orbits per minute, it's able to deliver a smooth performance over a variety of sanding applications..
  • EASY TO CLEAN DUST CONTAINER - The X-flow dust collector uses cyclone force to collect dust in it's easy-to-empty transparent container..
  • SPEED CONTROL - Variable speed control provides the right amount of power and control across different materials..
  • LOW VIBRATION - Through its ergonomic design and a soft rubber grip your hand stays comfortable while counterweight balance reduces hand fatigue from vibration. All so that you can work longer..
  • SAND IN TIGHT PLACES - With a compact size and ergonomic design This sander can get into tight spaces easily and maximizes user control..
  • EASY ON/OFF - The dust sealed on/off switch makes a hassle-free flip-of-the-switch during application..
Check Stock

Supercell High-Pressure Dust Collector (30-Gallon)

  • 10X HIGHER SUCTION POWER than standard dust collectors and the only dust collection system on the market with high enough levels of static pressure (WC) and airflow (CFM) to effectively capture and contain dust from every tool in the shop with a dust port size of 1” to 5”. BEST DUST COLLECTOR – Popular Mechanics 2020 Tool Awards.
  • UNIVERSAL COLLECTION – Combined 5HP fan blower motors easily accommodate the widest range of tools, including handheld sanders, table saws, and miter saws to jointers, planers, and even CNC routers with up to an astounding 100’ of 4” hose or ductwork..
  • HEPA FILTRATION - Premium HEPA-Grade Filter Media with non-stick, PTFE membrane. Internal pulse filter cleaner removes clogs in seconds without needing to take apart the system for cleaning. Plus, high-efficiency cyclone separator removes 99% of the dust before it even reaches the filter..
  • FLEXIBLE USE – Available as a wall-mounted system with either a 14-, 30-, or 55-gallon collection bin, or as a mobile unit with a 14-gallon bin..
  • INNOVATIVE FEATURES include wireless remote, pulse filter cleaner, dust bin with liner bag holder and fill level viewing window, Dust Sentry bin level sensor, and more – all in a compact footprint and profile. Patent Pending..
Check Stock

POWERTEC 70292 4-Inch Cyclone Dust Collection Elbows and Couplers Separator Kit for Woodworking Debris Containers Buckets and Barrels

  • INCLUDES: (2) 4” Separator Elbows, (2) 4” Separator Couplers (2) Hose Clamps.
  • FUNCTION: Provides you with a set of easy-to-install components to create your very own 2-stage dust collection system.
  • APPLICATION: Working in combination with your woodworking dust cyclone, these dust collection fittings combine to give you in-feed and out-feed points when they are utilized with debris & dust buckets, barrels, or boxes.
  • VERSATILE: Whether you’re working as a hobbyist or professional, you’ll find that these fittings and clamps to be a perfect fit for an assortment of planers, jointers, router tables and other 4” dust collector tool ports.
  • PREMIUM: All included parts are constructed of durable, rugged, anti-abrasion ABS plastic and optimized with an anti-clogging design for optimal efficiency.
Check Stock

SKIL 5” Random Orbital Sander with Cyclonic Dust Box & 3pc Sanding Sheet - SR211601

  • POWERFUL - With a 2.8 amp motor and 13,000 orbits per minute, it's able to deliver a smooth performance over a variety of sanding applications..
  • EASY TO CLEAN DUST CONTAINER - The X-flow dust collector uses cyclone force to collect dust in it's easy-to-empty transparent container..
  • SPEED CONTROL - Variable speed control provides the right amount of power and control across different materials..
  • LOW VIBRATION - Through its ergonomic design and a soft rubber grip your hand stays comfortable while counterweight balance reduces hand fatigue from vibration. All so that you can work longer..
  • SAND IN TIGHT PLACES - With a compact size and ergonomic design This sander can get into tight spaces easily and maximizes user control..
  • EASY ON/OFF - The dust sealed on/off switch makes a hassle-free flip-of-the-switch during application..
Check Stock

Baileigh 3 hp 220V 1Ph Cyclone Style Dust Collector, 2111 CFM, 63 Gallon Drum

  • 8+ HOURS OF POWER: Mighty 3 hp motor runs on 220-volt single-phase power allwing it to run over 8 hours a day..
  • DOUBLE THE CAPACITY: Produces 2,111 CFM, more than twice as much capacity as our standard DC-1450C wood dust collector..
  • LESS EMPTYING: 63-gallon drum holds enough dust so that you don’t have to empty it too often..
  • QUICK-RELEASE LEVER: Allows the drum to slide right out for emptying..
  • NO SUCTION LOSS: Efficient cyclone design doesn’t lose suction. This model is almost as powerful as our larger capacity bag-style DC-2300B..
Check Stock